GPM ROBNYO3GY User manual

GLOBAL PROCUREMENT AND MARKETING LIMITED
1
3 Door Wardrobe
Assembly Instructions – Please keep for future reference
Dimensions No. people Assembly Time SKU #
Width: 112cm
90 mins
(approx.)
Depth: cm
Height: 180cm
1800mm
500mm
1120mm
50 ROBNYO3GY
ROBNYO3WT
ROBNYO3GY ROBNYO3WT
Important
PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING ASSEMBLY
PLEASE DO NOT THROW THE PACKAGING AWAY UNTIL YOU ARE SATISFIED WITH PURCHASE,
GOODS NEED TO BE RETURNED IN ORIGINAL PACKAGING.
If you need help or have damaged or missing parts, please email aft[email protected]

2
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
•Check you have all the
components and tools listed
on pages 4 and 5.
•Remove all fittings from the
plastic bags and separate
them into their groups.
•Keep children and animals
away from the work area,
small parts could choke if
swallowed.
•Make sure you have enough
space to lay out the parts
before starting.
•Do not stand or put weight on
the product, this could cause
damage.
•Assemble the item as close to
its final position (in the same
room) as possible.
•Assemble on a soft, level
surface to avoid damaging the
unit or your floor.
•We do not recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit.
Only use hand screwdrivers.
•Dispose of all packaging
carefully and responsibly.
Care and Maintenance
•Only clean using a damp cloth and
mild detergent, do not use bleach or
abrasive cleaners.
•From time to time check that there
are no loose screws on this unit.
•This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
If you are unhappy with the product and wish to return it,
please follow the retailer’s returns procedure.
P.:01

3
Exploded View If you have damaged or missing components,
email: [e-mail]

MIDDLE VERTICAL PANEL
BACK PANEL
4
Components - Panels
Please check that you have all the components listed below before constructing your item.
Part No Description Qty Size
(mm)
Thickness
(mm)
1 TOP PANEL 1 1120X500 15
2 LEFT SIDE PANEL 1 1784X474 15
3 RIGHT SIDE PANEL 1 1784X474 15
4 LEFT FRAME PANEL 1 1784X60 18
5 RIGHT FRAME PANEL 1 1784X60 18
6 BOTTOM PANEL 1 991X474 15
7 SHELF 1 654X471 15
8 BOTTOM FRAME PANEL 1 988X60 15
9 BACK BOTTOM RAIL 1 991X120 15
10 BACK CENTRAL RAIL 1654X80 15
TOP FRAME RAIL
1 988X59 15
12
DOOR PANEL
3 1582X326 18
13
2
1677X337
3
14
SHELF 3
471X322
15
B 1 1649X472
16
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [email protected]
If you have damaged or missing components,
email: [e-mail]
15
15
BACK PANEL 11677X344 3
11

Anti-failing accessory
5
Components - Fixings
Please check that you have all the components listed below before constructing your item.
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
Tools Required
Ruler – Use this to measure your screws (mm)
Important –Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [email protected]
If you have damaged or missing components,
email: [e-mail]
CAM lock dowel CAM lock ×61 Wood dowel×20 Screwø3.5*14 Hange base×2
Handle ×3 Bolt for Handle ×3 Nail leg ×5 Nail ×80 Side hings ×6
Hanger rod ×1 Doorstop×1 Middle hings ×3 ×2
M4*22
CAM lock dowel
CAM lock x61
Wood dowel x20
Screwø3.5*14
Hanger base x2

Assembly Instructions If you have damaged or missing components,
email: [e-mail]
6
Wood dowel×2 CAM lock dowel
Screwø3.5*14 Hange base×1
Wood dowel×5 CAM lock dowel

7
Wood dowel CAM lock dowel
CAM lock ×6 CAM lock dowel
B CAM lock x6
A CAM lock dowel
x6
x8

8
A CAM lock dowel
B CAM lock x4
B CAM lock x6
x8

9
A CAM lock dowel
B CAM lock x8
Doorstop x1
x2

10
A CAM lock dowel
D Screwø3.5*14
x2
E Hanger base
x1
x4
B CAM lock x12