GPM STRATFORD ROBSTR2 OK User manual

GOLBAL PROCUREMENT AND MARKETING LIMITED
Assembly instruction- Please keep for future reference ROBSTR2 OK
Dimensions No.People Assembly Time OW#
Width: 75 cm
Depth: 50 cm
Height:
180 cm
90 mins
(approx)
thank you
For purchasing this
GPM Limited
product
1
STRATFORD 3 DRAWER 2 DOOR ROBE
ROBSTR2 GY
ROBSTR2 WT ROBSTR2 BK
ROBSTR2 OK
ROBSTR2 GY
ROBSTR2 WT
ROBSTR2 BK
750mm
1800mm
500mm
1200mm
164.5mm
If you need help or have damaged or missing parts, please email [e-mail]
Important
PLEASE READ THESE INSTRUCTION FULLY BEFORE STARTING ASSEMBLY.
PLEASE DO NOT THROW THE PACKAGING AWAY UNTIL YOU ARE STATISFIED WITH PURCHASE,
GOODS NEED TO BE RETURNED IN ORIGINAL PACKAGING.

Safety and Care Advice
!
Important-Please read these instructions fully before starting assembly
If you are unhappy with the product and wish to return it,
please following the retailer’s returns procedure.
Components - Panels
Make sure you have enough
space to lay out the parts
before starting.
Do not stand or put weight on
the product, this could cause
damage.
Assemble the item as close to
its final position (in the same
room) as possible.
Assemble on a soft, level
surface to avoid damaging the
unit or your floor.
We do not recommend the
use of power
drill/drivers for
inserting screw,
as this could
damage the unit.
only use hand screwdrivers.
Dispose of all packaging
carefully and responsibly.
Care and Maintenance
This product should not be
discarded with household
waste.Take to your local
authority waste disposal centre.
From time to time check
that there are no loose
screws on this unit.
Only clean using a damp cloth
and mild detergent, do not use
bleach or abrasive cleaners.
2
Check you have all the
components and tools listed
on pages 2,3 and 4.
Remove all fittings from the
plastic bags and separate
them into their groups.
Keep children and animals
away from the work area,
small parts could choke if
swallowed.
1
2
3
4
5
6
7
8
9
11
9
10
12
13

Components - Panels
Please check that you have all the components listed below before constructing your item.
Important-Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [e-mail]
If you have damaged or missing components,
email: [e-mail]
Part No Description Qty Thickness
(mm)
1
2
3
4
5
6
7
8
9
Lower Front Panel
Left Side Panel
Back Panel
Drawer Front Panel
Drawer Side Panel
Drawer Back Panel
Drawer Base Panel
15 mm
15 mm
15 mm
15 mm
3 mm
15 mm
15 mm
1
1
1
1
1
1
1
3
6
3
Top Panel
3 mm
15 mm
Right Side Panel
Lower Back Panel
3
3
15 mm
15 mm
10
11
Horizontal Panel
12
13
Left Side Door Panel
Right Side Door Panel
1
1
15 mm
15 mm

Components - Fixings
Please check that you have all the components listed below before constructing your item.
Important-Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [e-mail]
If you have damaged or missing components,
email: [e-mail]
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
0
mm
10
515 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180
Ruler - Use this to measure your screws (mm)
Tools Required ( Not Provided)
(A) (B) (D)( C )
4
M3.5 X 20mm
X 4
Wall Plug
X 4
Strap
X 2
Bracket
X 4
M4 X 32mm
X 4
HARDWARE
ANTI - TIPPING KITS
Allen Key
X 1
Handle
X 5
Leg Pin
X 4
JCBC M6 X 40mm
X 12
M3.5 X 14mm
X 76
Button Head 18mm
X 10
Nail
X 65
Hinges
X 6 sets
Hanger Rod
X 1
(E)
(F) (G) (I)( H)
(P) (Q) (S)( R)
(J)
(K) (L) (N)( M)
(O)
Drawer Slide 14’
X 3 sets
Door Stopper
X 1
Mini Fit
X 6 sets
Dowel (M8X25)
X 12
M4 X 32mm
X 12
Bolt Nut

Assembly Instructions If you have damaged or missing components,
email: [e-mail]
Step 2
Step 1
5
C
16
L
L
L
L
L
L
C C C C C
LL
9x6
F
G
G
G
8x3
Attach drawer slide rail to Left Side Panel and Right Side Panel to the pre-drill pilot holes
with Screw as shown, using a philip Screw driver.
L16
C
Step 2a
Attach Minifit bolt using a Philip head
Screw driver to Drawer Front panel Step 2b
Attach Dowel and Minifit Nut to Drawer side panel
G
8
FG9

Step 3
Step 4
Step 5
1 st 2nd
INSERT
RIGHT
POISITION
3rd
LOCK
G
H
8
9
9
10
IB
B
D
11
L
L
C
C
C
C
C
C
L
C
C
C
J
A
M
2
A
1
6
3
4
5
A
A
A
A
6
2
step 5a.Attach Side Panel and to Top panel ,
3 4 5
M
Horizontal Panel , Lower panel &
16
and then slot in hanger rod to the hole on the
top side panel as shown. Fasten the wardrobe
frame with Screw using Allen key
A
Step 3a
Attach Handle to Drawer Front panel with
a Screw using a Philip head screw driver.
H8
Step 3b
Fasten drawer side panel to front panel with minifit.
Secure the drawer back panel with screw using a
Philip head screw driver.
98
10 Bx 3 sets
Step 3c
Attach base board with nail to the
drawer base using a small hammer.
11 D
Attach drawer slide rail to drawer base as shown
with screw using a Philip head Screw driver.
L
C
I
as shown and tighten with a Philip head Screw driver or
Allen key.
N
step 5b.
Slot in plastic Door stopper to
the two pre-drilled holes on the
underside of Top panel
J
2

Step 6
Step 7
Step 8
P
R
7
7D
E
E
E
E
C
C
C
C
K
13
12
HI
IH
1st
WALL
Drill
Bit
6mm
2nd
QO
R4th
S
R
R
7
Attach the Anti- Tipping kit to the wall, following the setps as shown.
7a. Attach Hinges to Door left panel
using a Philip head Screw driver.
K12
and Door right panel with Screw C
13
Philip head Screw driver.
7b.Attach Door handle H
with Screw using a
I
6b. R
Attach the Anti-Tipping kit bracket
at the back of the wardrobe, with
P
Screw , using a Philip head Screw
driver.
6d.
the wardrobe as shown,
using a small hammer.
Attach Leg Pin , to the bottom of
E
6a.
to the back of the wardrobe frame as shown
Attach Back board ,
7
with Nail , using a small hammer.
D
complete
6d.
side of Back board as shown,
using a Philip head Screw driver.
Secure Screw to the lower
C
7
7c. Slot in assembled drawers to the
wardrobe frame.