Graco 24U175 Parts list manual

Instructions-Parts
Simulation Advanced
Display Module
For Reactor®E-30i and E-XP2i and Reactor®2 and Integrated Reactor®2 proportioning
systems. For demonstration use only.
Kit No. 24U175
Related Manuals
Important Safety Instructions
Read all warnings and instructions in this
manual and in the Reactor E-30i and E-XP2i
Operation manual. Save all instructions.
Manual Description
3A1705 Reactor E-30i and E-XP2i, Operation
3A1706 Reactor E-30i and E-XP2i, Repair-Parts
332636 Reactor 2 E-30i and E-XP2i, Operation
332637 Reactor 2 E-30i and E-XP2i, Repair-Parts
333023 Reactor 2 E-30 and E-XP2, Operation
333024 Reactor 2 E-30 and E-XP2, Repair-Parts
3A1244 Graco Control Architecture™Module
Programming, Instructions
ti19197a
3A2716D
EN
Get other manuals https://www.bkmanuals.com

Setup
2 3A2716D
Setup
The ADM (1) is installed with the Reactor 2/Integrated
Reactor 2 software. The simulation software on the blue
simulator token (4) overrides the Integrated Reactor
software and will simulate all of the functions of an ADM
installed on a Reactor 2 or Integrated Reactor 2.
1. Remove cover and ensure blue simulator token (4)
is inserted in the Advanced Display Module - ADM
(1). Replace cover.
2. Connect transformer (2) cable to the ADM left port.
Connect to a power outlet.
3. Turn on the ADM (1).
4. The ADM can now simulate all functions of an ADM
installed on a Reactor 2 or Integrated Reactor 2.
See Reactor manual for information about screens,
icons, and functions.
Use in Reactor 2 or
Integrated Reactor 2
To use the simulation module in any Reactor 2 or Inte-
grated Reactor 2, complete the following:
1. Disconnect the transformer from the power outlet.
2. Check that the ADM has the latest software.
a. Turn on the ADM and go in Setup Mode.
b. View the Advanced Screen - 4 and note the
software version.
c. Identify the latest software version for the Reac-
tor 2 or Integrated Reactor 2. The latest soft-
ware version for the system can be found at
www.graco.com. If you have the latest software
continue to step 3.
d. Purchase a new black token (3) if the software
on the ADM is not the latest software. See man-
ual 3A1244 for software downloading process.
3. Remove cover and remove the blue simulator token
(4).
4. Replace cover.
Use ADM in Other
Products
The module must be programmed with scrub software
to use the ADM in other products or simulators. Pur-
chase scrub token 16N147.
1. Remove cover and blue simulator token (4).
2. Insert the scrub token. See manual 3A1244 for soft-
ware downloading process.
3. Replace cover.
Return to Simulation
Mode
If the ADM needs to be converted back to a simulation
module, reinsert the blue simulator token (4).
Get other manuals https://www.bkmanuals.com

Parts
3A2716D 3
Parts
24U175, Simulation Advanced Display Module
* Installed in ADM (1).
+ Includes Token (3)
ti19197b
1
2
4
3
Ref. Part Description Qty.
1+ 24U854 ADM 1
2 16N946 TRANSFORMER, 120 VAC to 12 VDC 1
3 16X940 TOKEN, GCA, Reactor 2; black 1
4* 24N372 TOKEN, GCA, simulator; blue 1
Get other manuals https://www.bkmanuals.com

All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
2ULJLQDOLQVWUXFWLRQV This manual contains English. MM 3A2716
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2012, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
www.graco.com
Revision D, July 2015
Graco Standard Warranty
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty
published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by
Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written
recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or
maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of
the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned
to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs
will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or
consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these
warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or
the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the
negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into,
given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la
rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite
de ou en rapport, directement ou indirectement, avec les procédures concernées.
Graco Information
For the latest information about Graco products, visit www.graco.com.
For patent information, see www.graco.com/patents.
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: [phone] or Toll Free: 1-800-328-0211 Fax: [phone]
Get other manuals https://www.bkmanuals.com