Graco G3000 User manual

Instructions-Parts
Informer® Informer®
Informer®Fluid Fluid FluidMonitoring Monitoring MonitoringKits Kits Kits3A2040H
EN
Use Use
Useto to tomonitor monitor monitor󰘱ow 󰘱ow 󰘱owrate rate rateand and andtrack track trackmaterial material materialuse. use. use.For For Forprofessional professional professionaluse use useonly. only. only.
Important Important
ImportantSafety Safety SafetyInstructions Instructions Instructions
Readallwarningsandinstructionsinthismanual.Save Save
Savethese these these
instructions. instructions.
instructions.
See See
Seethe the theG3000 G3000 G3000meter meter metermanual manual manual
(308778) (308778)
(308778)or or orCoriolis Coriolis Coriolismeter meter metermanual manual manual
(313599) (313599)
(313599)for for for󰘱ow 󰘱ow 󰘱owmeter meter metermaximum maximum maximum
working working
workingpressure. pressure. pressure.
See See
Seepage page page3 3 3for for forkit kit kitinformation, information, information,
including including
includingapprovals. approvals. approvals.
PROVENQUALITY.LEADINGTECHNOLOGY.

Contents Contents
Contents
InformerModelsandKits....................................3
Warnings...........................................................5
Installation..........................................................8
Overview.....................................................8
Non-HazardousLocations............................9
HazardousLocations....................................10
Grounding...................................................12
CableConnections.......................................12
ElectricalConnections..................................13
Operation...........................................................16
PressureReliefProcedure............................16
FlowMeterOperation...................................16
MeterCalibration.........................................17
SettingModbusAddress...............................18
UpdateSoftware..........................................18
ReplaceBattery...........................................19
DisplayModule...................................................20
DisplayInformation......................................20
OperationModes.........................................20
ScreenNavigationandEditing......................20
Icons...........................................................21
RunScreens......................................................23
PasswordScreen...............................................24
SetupScreens....................................................25
DeviationsandAdvisories...................................29
Troubleshooting..................................................30
Parts..................................................................31
Accessories........................................................33
MountingDimensions.........................................34
AppendixA-ModbusVariableMap.....................35
AppendixB-AdvancedWebInterface.................37
TechnicalData...................................................41
CaliforniaProposition65.....................................41
GracoStandardWarranty....................................42
23A2040H

InformerModelsandKits
Informer Informer
InformerModels Models Modelsand and andKits Kits Kits
AllDisplayControlModules(DCM)arebasemodelnumber24L096(Ref.1).Models24L096and24N671
(DCMwithbracket)arenotavailableforseparatesale.SeeapprovalinformationinManual332013andon
thispage.Thesmalllabel(Ref.2)onthebackoftheInformermoduleshowstheInformerKitnumber.
Availablekitsaredescribedinthetablesthatfollow.
Model Model
ModelNo. No. No.Series Series
SeriesDescription Description
Description
24L096 24L096
24L096ADisplayControlModule(DCM),withnosoftwareloaded.SeeManual332013.
24N671 24N671
24N671ADisplayControlModule(DCM)withbracket,withnosoftwareloaded.SeeManual
332013.
9902471
ClassI,Div.1,
GroupDT3
Exia[ia]
Ta=0°Cto50°C
IntrinsicallySafeApparatus
PartofIntrinsicallySafeSystem.
ForuseinClassI,Division1,GroupDT3HazardousLocations
SeeManual332013,AppendixA,ControlDrawing16M169forentityparameters.
3A2040H3

InformerModelsandKits
Informersystemsarenotapprovedforuseinhazardouslocationsunlessallaccessoriesandallwiring
meetlocal,state,andnationalcodes.
Kits Kits
Kitsfor for forHazardous Hazardous HazardousLocations Locations Locations
Kit Kit
KitNo. No. No.Series Series
SeriesInformer Informer InformerModule Module Modulewith with with
Bracket Bracket
Bracket
(Manual (Manual
(Manual332013)* 332013)* 332013)*
No No
NoPower Power PowerAC AC
ACPower Power Powerwith with with
Barrier** Barrier**
Barrier**
G3000 G3000
G3000Meter Meter Meter
(Manual (Manual
(Manual308778)* 308778)* 308778)*
24L073 24L073
24L073A✔✔
24L074 24L074
24L074A✔✔✔
24L077 24L077
24L077A✔✔
24L078 24L078
24L078A✔✔✔
*Seecomponentmanualsforadditionalapproval
information.
**MustnotbeinstalledinHazardousLocation.
Kits Kits
Kitsfor for forNon Non Non- - -Hazardous Hazardous HazardousLocations Locations Locations
Kit Kit
KitNo. No. No.Series Series
SeriesInformer Informer InformerModule Module Modulewith with with
Bracket Bracket
Bracket
AC AC
ACPower Power PowerG3000 G3000 G3000Meter Meter Meter
24L075 24L075
24L075A✔✔
24L076 24L076
24L076A✔✔✔
9902471
Conformsto/Certi󰘰edtoUL/CSAStandard
61010–1
43A2040H

Warnings
Warnings Warnings
Warnings
Thefollowingwarningsareforthesetup,use,grounding,maintenanceandrepairofthisequipment.The
exclamationpointsymbolalertsyoutoageneralwarningandthehazardsymbolreferstoprocedure-speci󰘰c
risks.Whenthesesymbolsappearinthebodyofthismanualoronwarninglabelsreferbacktothese
Warnings.Product-speci󰘰chazardsymbolsandwarningsnotcoveredinthissectionmayappearthroughout
thebodyofthismanualwhereapplicable.
WARNING WARNING
WARNING
FIRE FIRE
FIREAND AND ANDEXPLOSION EXPLOSION EXPLOSIONHAZARD HAZARD HAZARD
Flammablefumes,suchassolventandpaintfumes,inwork work
workarea area areacanigniteorexplode.Tohelp
prevent󰘰reandexplosion:
•Useequipmentonlyinwellventilatedarea.
•Eliminateallignitionsources;suchaspilotlights,cigarettes,portableelectriclamps,and
plasticdropcloths(potentialstaticarc).
•Keepworkareafreeofdebris,includingsolvent,ragsandgasoline.
•Donotplugorunplugpowercords,orturnpowerorlightswitchesonoroffwhen󰘱ammable
fumesarepresent.
•Groundallequipmentintheworkarea.SeeGrounding Grounding
Groundinginstructions.
•Useonlygroundedhoses.
•Holdgun󰘰rmlytosideofgroundedpailwhentriggeringintopail.Donotusepaillinersunless
theyareantistaticorconductive.
•Stop Stop
Stopoperation operation operationimmediately immediately immediatelyifstaticsparkingoccursoryoufeelashock.Donotuse
equipmentuntilyouidentifyandcorrecttheproblem.
•Keepaworking󰘰reextinguisherintheworkarea.
Staticchargemaybuilduponplasticpartsduringcleaningandcoulddischargeandignite
󰘱ammablevapors.Tohelpprevent󰘰reandexplosion:
•Cleanplasticpartsonlyinawellventilatedarea.
•Donotcleanwithadrycloth.
ELECTRIC ELECTRIC
ELECTRICSHOCK SHOCK SHOCKHAZARD HAZARD HAZARD
Thisequipmentmustbegrounded.Impropergrounding,setup,orusageofthesystemcan
causeelectricshock.
•Turnoffanddisconnectpoweratmainswitchbeforedisconnectinganycablesandbefore
servicingorinstallingequipment.
•Connectonlytogroundedpowersourceorgroundedelectricaloutlets.
•Useonly3–wireextensioncords.
•Ensuregroundprongsareintactonpowerandextensioncords.
•Donotexposetorain.Storeindoors.
•Allelectricalwiringmustbedonebyaquali󰘰edelectricianandcomplywithalllocalcodes
andregulations.
3A2040H5

Warnings
WARNING WARNING
WARNING
INTRINSIC INTRINSIC
INTRINSICSAFETY SAFETY SAFETY
Intrinsicallysafeequipmentthatisinstalledimproperlyorconnectedtonon-intrinsicallysafe
equipmentwillcreateahazardousconditionandcancause󰘰re,explosion,orelectricshock.
Followlocalregulationsandthefollowingsafetyrequirements.
•Besureyourinstallationcomplieswithnational,state,andlocalcodesfortheinstallationof
electricalapparatusinaClassI,GroupD,Division1HazardousLocation,includingallofthe
localsafety󰘰recodes,NFPA33,NEC500and516,andOSHA1910.107.
•Equipmentthatcomesincontactwithintrinsicallysafeterminalsmustmeettheentity
parameterrequirementsspeci󰘰edinControlDrawing16M169.SeeAppendixAinManual
332013.Thisincludessafetybarriers,DCvoltagemeters,ohmmeters,cables,and
connections.Removetheunitfromthehazardousareawhenservicing.
•Ifaprinter,computer,orotherelectricalcomponentisconnected,itmustbeusedin
conjunctionwithasafetybarrier.
•Withoutthesafetybarrier,theequipmentisnolongerintrinsicallysafeandmustnotbe
operatedinhazardouslocations,asde󰘰nedinarticle500oftheNationalElectricalCode
(USA)oryourlocalelectricalcode.
•Donotinstallequipmentapprovedonlyfornon-hazardouslocationinahazardousarea.See
theIDlabelfortheintrinsicsafetyratingforyourmodel.
•Groundthepowersupply.Avoltagelimitingsafetybarriermustbeproperlygroundedtobe
effective.Forpropergrounding,usea12gaugeminimumgroundwire.Thebarrier’sground
mustbewithin1ohmoftrueearthground.
•Donotoperatethepowersupplymodulewiththecoverremoved.
•Donotsubstitutesystemcomponentsasthismayimpairintrinsicsafety.
000000
000000
000000
000000
000000
000000
SKIN SKIN
SKININJECTION INJECTION INJECTIONHAZARD HAZARD HAZARD
High-pressure󰘱uidfromgun,hoseleaks,orrupturedcomponentswillpierceskin.Thismay
looklikejustacut,butitisaseriousinjurythatcanresultinamputation.Get Get
Getimmediate immediate immediatesurgical surgical surgical
treatment. treatment.
treatment.
•Engagetriggerlockwhennotspraying.
•Donotpointgunatanyoneoratanypartofthebody.
•Donotputyourhandoverthespraytip.
•Donotstoporde󰘱ectleakswithyourhand,body,glove,orrag.
•FollowthePressure Pressure
PressureRelief Relief ReliefProcedure Procedure Procedurewhenyoustopsprayingandbeforecleaning,checking,
orservicingequipment.
•Tightenall󰘱uidconnectionsbeforeoperatingtheequipment.
•Checkhosesandcouplingsdaily.Replacewornordamagedpartsimmediately.
63A2040H

Warnings
WARNING WARNING
WARNING
EQUIPMENT EQUIPMENT
EQUIPMENTMISUSE MISUSE MISUSEHAZARD HAZARD HAZARD
Misusecancausedeathorseriousinjury.
•Donotoperatetheunitwhenfatiguedorunderthein󰘱uenceofdrugsoralcohol.
•Donotexceedthemaximumworkingpressureortemperatureratingofthelowestrated
systemcomponent.SeeTechnical Technical
TechnicalData Data Datainallequipmentmanuals.
•Use󰘱uidsandsolventsthatarecompatiblewithequipmentwettedparts.SeeTechnical Technical
TechnicalData Data Data
inallequipmentmanuals.Read󰘱uidandsolventmanufacturer’swarnings.Forcomplete
informationaboutyourmaterial,requestMSDSfromdistributororretailer.
•Donotleavetheworkareawhileequipmentisenergizedorunderpressure.
•TurnoffallequipmentandfollowthePressure Pressure
PressureRelief Relief ReliefProcedure Procedure Procedurewhenequipmentisnotinuse.
•Checkequipmentdaily.Repairorreplacewornordamagedpartsimmediatelywithgenuine
manufacturer’sreplacementpartsonly.
•Donotalterormodifyequipment.Alterationsormodi󰘰cationsmayvoidagencyapprovals
andcreatesafetyhazards.
•Makesureallequipmentisratedandapprovedfortheenvironmentinwhichyouareusingit.
•Useequipmentonlyforitsintendedpurpose.Callyourdistributorforinformation.
•Routehosesandcablesawayfromtraf󰘰careas,sharpedges,movingparts,andhotsurfaces.
•Donotkinkoroverbendhosesorusehosestopullequipment.
•Keepchildrenandanimalsawayfromworkarea.
•Complywithallapplicablesafetyregulations.
TOXIC TOXIC
TOXICFLUID FLUID FLUIDOR OR ORFUMES FUMES FUMES
Toxic󰘱uidsorfumescancauseseriousinjuryordeathifsplashedintheeyesoronskin,
inhaled,orswallowed.
•ReadMSDSstoknowthespeci󰘰chazardsofthe󰘱uidsyouareusing.
•Storehazardous󰘱uidinapprovedcontainers,anddisposeofitaccordingtoapplicable
guidelines.
PERSONAL PERSONAL
PERSONALPROTECTIVE PROTECTIVE PROTECTIVEEQUIPMENT EQUIPMENT EQUIPMENT
Wearappropriateprotectiveequipmentwhenintheworkareatohelppreventseriousinjury,
includingeyeinjury,hearingloss,inhalationoftoxicfumes,andburns.Thisprotective
equipmentincludesbutisnotlimitedto:
•Protectiveeyewear,andhearingprotection.
•Respirators,protectiveclothing,andglovesasrecommendedbythe󰘱uidandsolvent
manufacturer.
3A2040H7

Installation
Installation Installation
Installation
Overview Overview
Overview
ThepurposeoftheInformerDisplayControlModule
istocollectanddisplay󰘱uiddata.TheInformer
connectstheoutputsignalfromametertoadisplay
modulethatperformsthefollowingfunctions:
•Showsreal-time󰘱uid󰘱owrate.
•Displaysaresettablebatchtotalizer.
•Monitorsandreportsoverall󰘱uiduse.
•Alarmsifthe󰘱owrateistoofastortooslowfor
theuser-settargets.
•Alarmswhenthemaintenancetotalisreachedfor
theuser-settarget.
•Displaysalogofthelast20alarms.
TheInformerisavailableincon󰘰gurationsfor
HazardousLocationorNon-HazardousLocation
installation.ThepowersupplyforHazardous
Locationscomeswithonebarrier,topowerone
Informer.Uptothreeadditionalbarrierscanbe
addedtothepowersupplytopowerthreeadditional
Informers.SeeAccessories,page33,toorder
additionalbarriersandInformerModules.
83A2040H

Installation
Non Non
Non- - -Hazardous Hazardous HazardousLocations Locations Locations
NOTE: NOTE:
NOTE:Non-ISInformermodulesareshippedwitha
120VACpowercord(E).Usersinareaswithanother
standardvoltagemustprovideapowersupply
cordwithanIEC320–C13femaleconnector.See
TechnicalData,page41,forpowerrequirements..
•Thenonintrinsicallysafeterminals(powerrail)
mustnotbeconnectedtoanydevicewhichuses
orgeneratesmorethan250vrmsord.c.unlessit
hasbeendeterminedthatthevoltagehasbeen
adequatelyisolated.
Key: Key:
Key:
A A
AFlowMeter,1/4nptfemaleinlet/outlet
B B
BInformerModule
C C
CPowerSupplyandCable(6ft.,2m),toterminal3.SeeCableConnections,page12.
D D
DMeterCable(50ft.,15m),toterminal4.SeeCableConnections,page12.
E E
EPowerCord(10ft.,3m).SeeNOTEabove.
M M
MGroundwireandclamp.PN244524isincludedwithkitstogroundtheInformerModule.PN238909
issoldseparatelytogroundthemeter.
3A2040H9

Installation
Hazardous Hazardous
HazardousLocations Locations Locations
Donotsubstituteormodifysystemcomponents
asthismayimpairintrinsicsafety.Forinstallation,
maintenance,oroperationinstructions,read
instructionmanuals.Donotinstallequipment
approvedonlyfornon-hazardouslocationina
hazardouslocation.Seetheidenti󰘰cationlabelfor
theintrinsicsafetyratingforyourmodel.
Intrinsicallysafeequipmentshouldnotbeusedwitha
powersupplythathasnobarrier.Donotmoveunits
fromanon-ISsetuptoanISsetup.ISequipment
thathasbeenusedwithanon-ISpowersupplymust
notbereturnedtoahazardouslocation.Alwaysuse
anintrinsicallysafepowersupplywithISequipment.
•InstallationshouldbeinaccordancewithANSI/ISA
RP12.06.01,“InstallationofIntrinsicallySafe
SystemsforHazardous(Classi󰘰ed)Locations,”
andtheNationalElectricalCode®(ANSI/NFPA
70).
•InstallationinCanadashouldbeinaccordance
withtheCanadianElectricalCode,CSAC22.1,
Part1,AppendixF.
•ForATEX,installperEN60079-14andapplicable
localandnationalcodes.
•Multipleearthingofcomponentsisallowedonly
ifahighintegrityequipotentialsystemisrealized
betweenthepointsofbonding.
•Donotremoveanycoveruntilpowerhasbeen
removed.
•InstallaccordingtoControlDrawingNumber
16M169.SeeAppendixAinManual332013.
103A2040H

Installation
Nonhazardous Nonhazardous
NonhazardousLocation Location LocationHazardous Hazardous HazardousLocation Location Location
KEY: KEY:
KEY:
A A
AFlowMeter,1/4nptfemaleinlet/outlet.
B B
BInformerModule
C C
CPowerSupplywithBarrier
D D
DMeterCable(50ft.,15m),toterminal4.SeeCableConnections,page12.
E E
EPowerCord(notsupplied)
F F
FPowerCable(50ft.,15m),toterminal3.SeeCableConnections,page12.
M M
MGroundwireandclamp.PN244524isincludedwithkitstogroundtheInformerModule.PN238909
issoldseparatelytogroundthemeterorpowersupply.
3A2040H11

Installation
Grounding Grounding
Grounding
Theequipmentmustbegroundedtoreducethe
riskofstaticsparkingandelectricshock.Electric
orstaticsparkingcancausefumestoigniteor
explode.Impropergroundingcancauseelectric
shock.Groundingprovidesanescapewireforthe
electriccurrent.
NOTE: NOTE:
NOTE:TheInformerdoesnotprovide500VAC
isolationthroughthecouplingnutsontheenclosure.
Theassociatedapparatusandthe󰘰eldapparatus
cableshieldsmustnotbeconnectedtotheInformer
couplingnuts.
1.Power Power
PowerSupply Supply Supply16M167: 16M167: 16M167:Connectthegroundwire
fromthepowersupplytoatrueearthground.
2.Informer Informer
InformerModule: Module: Module:Connectagroundwireand
clamptothescrewonthetopofthebracket.
Connecttheotherendtoground.InanIS
system,theInformeralsoisgroundedby
connectiontothegroundedpowersupply.
3.Flow Flow
FlowMeter: Meter: Meter:Followtheinstructionsinmanual
308778(G3000)ormanual313599(Coriolis)to
groundthe󰘱owmeterandcheckitselectrical
groundingcontinuity.
4.Fluid Fluid
FluidSupply: Supply: Supply:Groundthe󰘱uidsupplyunit.
Cable Cable
CableConnections Connections Connections
Port Port
PortDescription Description DescriptionConnection Connection
Connection
1FiberOpticReceiverRedLeadfromTXonFiberOpticConverter(PN16K465)orfrom
Port6onanotherInformer(orProControl1KE)
2FiberOpticTransmitterBlackLeadtoRXonFiberOpticConverter(PN16K465)ortoPort
5onanotherInformer(orProControl1KE)
3PowerFromPowerSupply
4DigitalInput/OutputTo/FromMeterandtoLightTower(accessory)
5FiberOpticRecieverBlackLeadfromPort2onanotherInformer(orProControl1KE)
6FiberOpticTransmitterRedLeadtoPort1onanotherInformer(orProControl1KE).
123A2040H

Installation
Electrical Electrical
ElectricalConnections Connections Connections
InstallperGracoControlDrawing16M169,inManual
332013.SeealsoFigure1.
1.Connectmainpowersupplycord(E,not
supplied)throughstrainrelieftoterminalsLand
Nonthepowersupplyunit.
Note: Note:
Note:Useeitherstrainrelief(5)or(6),depending
onthesizeofthecord.
2.Connectpowercordgroundwiretoground
terminalblock.
3.ConnectISpowercable(F)perthefollowing
table.
Power Power
PowerCable Cable CableLeads Leads LeadsBarrier Barrier BarrierConnection Connection Connection
Brown(power)Connector1
Blue(common)Connector2
GlossyBlack(ground)andBlack(drain)connectto
groundblock.
Figure1
KEY KEY
KEY
EInboundACPowerCord
FPowerCabletoInformer
WGroundWires
XBarrier
YGroundBlock
5StrainReliefFitting
6StrainReliefFitting
3A2040H13

Installation
Typical Typical
TypicalInstallation Installation Installation
Non Non
Non- - -Hazardous Hazardous Hazardous
Location Location
Location
Hazardous Hazardous
HazardousLocation Location Location
143A2040H

Installation
A1 A1
A1and and andA2 A2 A2FlowMetersSuppliedinsomekits.SeeParts,page31.
B1 B1
B1and and andB2 B2 B2InformerModuleSupplied.
C C
CPowerSupplyandBarrierSuppliedinHazardousLocationKits
D D
DMeterCable(50ft.,15m)Supplied.
E E
EPowerCord(10ft.,3m)SuppliedinNon-HazardousLocationKits
F F
FPowerCable(50ft.,15m)Supplied
G G
GFiberOpticCableAccessory.SeeAccessories,page33.
H H
HSerialCableAccessory.SeeAccessories,page33.
J J
JAdvancedWebInterfaceAccessory.SeeAccessories,page33.
K K
KEthernetCableAccessory.SeeAccessories,page33.
L L
LPersonalcomputerNotsupplied.
Communication Communication
CommunicationOptions Options Options
GracoAccessoriesareavailabletoenable
communicationwithaProgrammableLogic
Controller(PLC)orPersonalComputer(PC).
•TheFiberOpticConverter(GracoKit24N978)
enablesModbusRTUcommunicationwitha
user-suppliedPLCusingaserialcable.
•AModbusGateway(GracoKit24N977)used
withaFiberOpticConverter(GracoKit24N978)
enablesModbusTCPcommunicationwitha
user-suppledPLC.
•AModbusGateway(GracoKit24N977)
canbeconnectedto(orinstalledin)
anAdvancedWebInterface(Graco
Kit15V337)toenablecommunication
withaPCusinganethernetcable.See
AppendixB-AdvancedWebInterface,page37,
forinstructions.
Thesecommunicationkitscomewithinstallation
andsetupdirectionsnecessaryfortheirusewiththe
Informer.
3A2040H15

Operation
Operation Operation
Operation
Pressure Pressure
PressureRelief Relief ReliefProcedure Procedure Procedure
FollowthePressureReliefProcedure
wheneveryouseethissymbol.
000000
000000
000000
000000
000000
000000
Thisequipmentstayspressurizeduntilpressure
ismanuallyrelieved.Tohelppreventserious
injuryfrompressurized󰘱uid,suchasskininjection,
splashing󰘱uidandmovingparts,followthe
PressureReliefProcedurewhenyoustopspraying
andbeforecleaning,checking,orservicingthe
equipment.
1.Turnoffthe󰘱uidsupplytothemeter.
2.Shutoffallpowertothe󰘱uidsystem.
3.FollowthePressure Pressure
PressureRelief Relief ReliefProcedure Procedure Procedureforyour
󰘱uidsystemdispensingdevice.
Flow Flow
FlowMeter Meter MeterOperation Operation Operation
Toreducetheriskofcomponentrupture,which
couldcauseinjuryfromsplashing󰘱uid,donot
exceedthemaximumworkingpressureofyour
meteroranycomponentoraccessoryinyour
system.
ForinformationontheG3000Graco󰘱owmeter,see
manual308778.ForinformationontheCoriolis󰘱ow
meter,seemanual313599.Calibratethemeteras
instructedbeforeusingthemeterforproduction.
NOTICE NOTICE
NOTICE
The󰘱owmetergearsandbearingscanbe
damagediftheyrotateattoohighaspeed.To
avoidhighspeedrotation,openthe󰘱uidvalve
gradually.Donotover-speedthegearwithairor
solvent.Toprolongmeterlife,donotusethemeter
aboveitsmaximum󰘱owrate.
163A2040H

Operation
Meter Meter
MeterCalibration Calibration Calibration
NOTE: NOTE:
NOTE:SeeSetup Setup SetupScreen Screen Screen4 4 4forfurtherscreen
information,ifneeded.
When When
Whento to toCalibrate Calibrate Calibrate
•The󰘰rsttimethesystemisoperated.
•Whenevernewmaterialsareusedinthesystem,
especiallyifthematerialshaveviscositiesthat
differsigni󰘰cantly.
•Aspartofregularmaintenancetoretainmeter
accuracy.
•Whenevera󰘱owmeterisservicedorreplaced.
Read Read
ReadBefore Before BeforeCalibration Calibration Calibration
•Meterk-factoronSetup Setup
SetupScreen Screen Screen4 4 4isupdated
automaticallyafterthecalibrationprocedureis
completed.Youalsomaymanuallyeditthe
k-factorifdesired.
•Allvaluesonthisscreenareinccorcc/pulse,
regardlessoftheunitssetintheotherSetup
screens.
•Beforecalibratingthemeter,besurethesystem
isprimedwithmaterial.
•Disablealarmsbeforecalibration.
Calibration Calibration
CalibrationSteps Steps Steps
1.Press
toenterSetupMode.
2.PresstomovetoSetupScreen4.
3.Presstoenterthescreen.
4.Presstobeginthecalibration.
3A2040H17

Operation
5.Dispenseabout300–500ccofmaterialintoa
graduatedcylinder.Theamountthesystem
measureswilldisplayinthemeasuredvolume
󰘰eld
.
6.Presstoendthecalibration.
7.Presstogettothedispensedvolume󰘰eld
,thenpress toenterthe󰘰eld.Enter
theamountofmaterialinthecylinder.
8.Afterthevolumeisentered,thesystemcalculates
thenewk-factorandshowsitonSetupScreen4.
NOTE: NOTE:
NOTE:Toclearthecounterandbeginthe
calibrationagain,press,movebrie󰘱yto
anotherscreen,thenreturntoSetupScreen4
andstartover.Ifyoupress withoutleaving
thescreen,thecounterwillcontinuefromwhere
itis,withoutclearing.
9.Presstoexitthescreen.
10.PresstoexitSetupMode.
Setting Setting
SettingModbus Modbus ModbusAddress Address Address
SeeSetup Setup
SetupScreen Screen Screen5 5 5.Bydefault,theModbusis
settoOff.IfyouneedtheModbus,setthe
ModbusmodetoSLAVE
.Theaddress
valueisbetween1and247.Themodbusaddress
correspondstotheaddressoftheInformer.See
AppendixAforfurtherinformation.
Update Update
UpdateSoftware Software Software
Softwareupdatesareinstalledusingasoftware
token(PN16P468),whichissentautomaticallywhen
anewversionofthesoftwareisreleased.Manual
3A1244willaccompanyanynecessarysoftware
updates.Followallinstructionsandwarningsin
Manual3A1244toupdateyourInformersoftware.
183A2040H

Operation
Replace Replace
ReplaceBattery Battery Battery
Replacethebatteryonlyiftheclockstopsfunctioning
afterdisconnectingpowerorapowerfailure.
Sparkingcanoccurwhenchangingthebattery.
Replacethebatteryonlyinanon-hazardous
location,awayfrom󰘱ammable󰘱uidsorfumes.
NOTICE NOTICE
NOTICE
Toavoiddamagetothecircuitboard,wearPartNo.
112190groundingstrap,andgroundappropriately.
1.Disconnectpower.
2.RemovetheInformerfromthebracket.
3.Attachthegroundingstrap.
4.Remove4screws,andthenremovetheaccess
cover.
5.Usea󰘱atheadscrewdrivertopryouttheold
battery.
NOTE: NOTE:
NOTE:Disposeofbatteryproperlyinan
approvedcontainerandaccordingtoapplicable
localguidelines.
6.Replacewithnewbattery.Ensurebattery󰘰ts
underconnectortabsbeforesnappingotherend
inplace.
NOTE: NOTE:
NOTE:UseonlyPanasonicCR2032batteriesfor
replacement.
7.Reassembleaccesscoverandscrews.
8.SnaptheInformerbackintothebracket.
3A2040H19

DisplayModule
Display Display
DisplayModule Module Module
Display Display
DisplayInformation Information Information
TheDisplayModuleprovidestheinterfaceforusers
toenterselectionsandviewinformationrelatedto
setupandoperation.
Thescreenbacklightisfactorysettoremainon,
evenwithoutscreenactivity.SeeSetup Setup
SetupScreen Screen Screen3 3 3
tosetthebacklighttimertoyourpreference.Press
anykeytorestore.
Keysareusedtoinputnumericaldata,entersetup
screens,navigatewithinascreen,scrollthrough
screens,andselectsetupvalues.
NOTICE NOTICE
NOTICE
Topreventdamagetothesoftkeybuttons,donot
pressthebuttonswithsharpobjectssuchaspens,
plasticcards,or󰘰ngernails.
Operation Operation
OperationModes Modes Modes
TheInformerhastwooperationmodes:RunMode
andSetupMode.Fordetailedinformationsee
RunScreens,page23,andSetupScreens,page25.
Press
totogglebetweenthesetwomodes.
Screen Screen
ScreenNavigation Navigation Navigationand and andEditing Editing Editing
Refertothissectionifyouhavequestionsabout
screennavigationorabouthowtoenterinformation
andmakeselections.
All All
AllScreens Screens Screens
1.Use tomovebetweenscreens.
2.Presstoenterascreen.The󰘰rstdata󰘰eld
onthescreenwillhighlight.
3.Use
tohighlightthedatayouwishto
change.
4.Presstoedit.
Drop Drop
DropDown Down DownField Field Field
1.Usetohighlightthecorrectchoicefrom
thedropdownmenu.
2.Presstoselect.
3.Presstocancel.
Number Number
NumberField Field Field
1.The󰘰rstdigitwillbehighlighted.Use
tochangethenumber.
2.Press tomovetothenextdigit.
3.Whenalldigitsarecorrect,press againto
accept.
4.Presstocancel.
Check Check
CheckBox Box BoxField Field Field
Acheckbox󰘰eldisusedtoenableordisablefeatures
inthesoftware.
1.Presstotogglebetween andanempty
box.
2.Thefeatureisenabledifaisinthebox.
Reset Reset
ResetField Field Field
Thereset󰘰eldisusedfortotalizers.Press to
resetthe󰘰eldtozero.
Whenalldataiscorrect,presstoexitthescreen.
Thenusetomovetoanewscreen,or
tomovebetweenSetupModeandRunMode.
203A2040H