Grandinroad 178309 User manual

EMAIL
[email protected]
CONTACT 1.800.491.4958
for assembly questions on
Weekdays // 8am-8pm EST
Saturday // 9:30am-6pm EST
#178309 Avondale Dining Chair
Assembly Instructions
#3736S
Assembly Instructions
WARNING: Failure to follow these directions and
warnings can result in serious injury and/or product damage.
If any parts become missing, damaged or worn, discontinue use until
they are replaced with identical parts.
Never stand on or use this chair as a ladder.
!
Do not tip this chair when seated.
!
!
This item is intended for indoor use only.
!
Do not exceed 225 pound (102 kg) weight limit on the chair.
!

TOOLS
PARTS
Please conrm you have the necessary parts to complete the assembly.
1
C
Left Front Leg (1x) Long Bolt (8x)
Locking Washer (8x)
Flat Washer (8x)
1.800.491.4958
ALLEN
WRENCH
Chair Seat (1x)
HARDWARECOMPONENTS
AE
Rear Leg (2x)
B F
Right Front Leg (1x)
G
D

2
ASSEMBLE
Dust Cover
Lorem ipsum
HELP?
1.800.491.4958
Avondale Dining Chair
Fasten the Right Front Leg (B) into leg
slot, on Chair Seat (A), using two of each of
the Bolts(G) and washers(E,F), as shown.
NOTE: Do not Over-tighten.
2
G
2
x
2
x
2
x
With Help. FLIP chair upside down, on a clean flat surface.
UNZIP the dust cover of the stool seat to access attachment holes.
1
Chair Seat (1x)
A
Right Front Leg (1x)
B
Flat Washer (2x)
E
Lock Washer (2x)
F
Bolt (2x)
G
E
F
B
A
AE
GF

3
ASSEMBLE
Avondale Dining Chair
4
3
Rear Leg (1x)
D
Flat Washer (4x)
E
Lock Washer (4x)
F
Bolt (4x)
G
G
2
x
EF
Insert the Left Front Leg (C) into leg
slot, as shown. Attach leg using two
of each of the Bolts(G) and washers(E,F),
as shown. NOTE: Do not Over-tighten.
C
Left Front Leg (1x)
C
G
2
x
D
EF
Insert one Rear Leg (D) into leg slot,
as shown. Attach leg using two of
each of the Bolts(G) and washers(E,F),
as shown. NOTE: Do not Over-tighten.
E
F
G
E
GF
HELP?
1.800.491.4958
CHAIR
ASSEMBLY

ASSEMBLE
4
Avondale Dining Chair
ZIPUP the dust cover of the stool seat to conceal the attachment bolts
and holes.
6
5
HELP?
1.800.491.4958
CHAIR
ASSEMBLY
G
2
x
E
F
D
Insert the other Rear Leg (D) into leg slot,
as shown. Attach leg using two of each
of the Bolts(G) and washers(E,F), as shown.
NOTE: Do not Over-tighten.
Flat Washer (2x)
E
Lock Washer (2x)
F
Bolt (2x)
G
Rear Leg (1x)
DE
F
G

ASSEMBLE
5
Avondale Dining Chair
With help, Flip chair assembly upright and move to desired location.
Assembly is now complete.
6
CHAIR
ASSEMBLY

6
Please contact one of our Product Specialist for assembly assistance questions or questions at
1-800-491-4958. Specialist are available weekdays 8:00 AM to 8:00 PM EST or Saturdays 9:30
AM to 6:00 PM.
Cleaning & Care Instructions:
For regular care and cleaning, periodically dust all surfaces with a dry cloth to remove residual
dust and prevent dirt from building up. Vacuum with upholstery brush as needed. Avoid wood
polishes with silicone contents. No harsh cleaners or solvents should ever be used on the
leather or fabric upholstery. For stubborn stains and spills, a lightly damp cloth with warm water
should be blotted on the stain to lift and remove it. If this does not work, a mild dish soap and
water solution should be mixed and then blotted to release the stain and then blot again with
dry cloth. All wood finishes, fabric, and leathers will fade with time. Avoid direct sunlight. Avoid
extreme changes in humidity. This can cause the wood components to warp and crack.
#178309 Avondal Dining Chair
Assembly Instructions