Grandinroad Milo 178312 User manual

EMAIL
[email protected]
CONTACT 1.800.491.4958
for assembly questions on
Weekdays // 8am-8pm EST
Saturday // 9:30am-6pm EST
178313 Milo Backless Counter Stool
Assembly Instructions
178312 Milo Backless Bar Stool
#3739BB/BC
Assembly Instructions
WARNING: Failure to follow these directions and
warnings can result in serious injury and/or product damage.
If any parts become missing, damaged or worn, discontinue use until
they are replaced with identical parts.
Never stand on or use this stool as a ladder.
!
Do not tip this stool when seated.
!
!
This item is intended for indoor use only.
!
Do not exceed 225 pound (102 kg) weight limit on the stool.
!

TOOLS
PARTS
Please conrm you have the necessary parts to complete the assembly.
1
1.800.491.4958
ALLEN
WRENCH
HARDWARECOMPONENTS
AD
BDowel (x8)
E
CWood Plugs (x4)
F
Bolts (x4)
G
Stool Legs (x2)
Bolt with Washers (x4)
Stool Seat (x1)
Stretchers (x2)

2
ASSEMBLE
Milo Backless Stool
HELP?
1.800.491.4958
Attach 2x Stretchers (C) with dowels to one Stool Leg (A) using
2x Bolts (G), as shown below.
NOTE: DO NOT Overtighten.Tighten Evenly.
2
INSERT 8x Dowels (E) into each side of both the Stool Seat (B) and
2x Stretchers (C), as shown.
SET ASIDE the Stool Seat with dowels,until it is needed in Step 3.
1
Stool Leg (x1)
A
Bolts (x2)
G
HELP?
1.800.491.4958
A
C
C
C
ALLEN WRENCH
B
C
C
G
Stool Seat (x1)
B
Dowel (x8)
F
Stretchers (x2)
C
E
E

3
ASSEMBLE
Milo Backless Stool
4
3
HELP?
1.800.491.4958
STOOL
ASSEMBLY
UNZIP the dust cover of the stool seat to access attachment holes.
Attach the Stool Seat (B) with dowels, to the Stool Assembly, using
2x Bolts w/Washers (D), as shown below.
NOTE: DO NOT Overtighten.Tighten Evenly.
Attach the other Stool Leg (A) to the Stool Assembly, using 2x Bolts
w/Washers (D) for the Stool Seat(B) and 2x Bolts (G) for the Stretchers (C).
NOTE: DO NOT Overtighten.Tighten Evenly.
ZIPUP the dust cover of the stool seat to hide the attachment holes.
Stool Leg (x1)
A
Bolt w/
Washers (x4)
D
Stool Seat (x1)
with dowels
B
Dust Cover
B
Bolts (x2)
GA
D
G
A
C
G
D
A
D
B
A

4
ASSEMBLE
Milo Backless Stool
5
Wood Plugs (x4)
F
HELP?
1.800.491.4958
STOOL
ASSEMBLY
INSERT 4x Wood Plugs (F) into each bolt holes on the legs of the
stool assembly.
Assembly is now complete.
F
F
F
D

5
grandinroad®
GrandinRoad: Please contact one of our Production Specialist for assembly assistance or questions
at 1.800.491.4958 or email [e-mail].
Specialists are available weekdays 8:00 am to 8:00 pm EST or Saturday 9:30 am to 6:00 pm.
Cleaning & Care Instructions:
For regular care and cleaning, periodically dust all surfaces with a dry cloth to remove residual
dust and prevent dirt from building up. Vacuum with upholstery brush as needed. Avoid wood
polishes with silicone contents. No harsh cleaners or solvents should ever be used on the
leather or fabric upholstery. For stubborn stains and spills, a lightly damp cloth with warm water
should be blotted on the stain to lift and remove it. If this does not work, a mild dish soap and
water solution should be mixed and then blotted to release the stain and then blot again with
dry cloth. All wood finishes, fabric, and leathers will fade with time. Avoid direct sunlight. Avoid
extreme changes in humidity. This can cause the wood components to warp and crack.
178313 Milo Backless Counter Stool
Assembly Instructions
178312 Milo Backless Bar Stool