Grandinroad SANDIAGO 180345 User manual

180345
SANDIAGO ROCKER

ATTACHED ROCKER (E) TO RIGHT SIDE FRAME (C) AS PICTURE
SHOWN, CONNECTING BACK OF ROCKER TO BACK LEGS FIRST
THEN THE FRONT OF ROCKERS. SECURE CONNECTIONS WITH
1 5/8" BOLTS (F).
CARE & MAINTENANCE
2
INSTALL BACK SUPPORT (A), AND SEAT (B) INTO CORRESPONDING
HOLES OF RIGHT SIDE FRAME (C) USING 1 1/8" BOLTS (G),AS SHOWN.
ATTACH THE LEFT SIDE (D) INTO CORRESPONDING
HOLES OF BACK SUPPORT (A), AND SEAT (B) USING1 1/8"
BOLTS (G). MAKE SURE ALL PART ARE CONNECTING
AND TIGHTEN ALL BOLTS COMPLETELY. ENJOY !
*To increase the item lifespan, avoid leaving the furniture in standing water or in direct contact with wet ground.
*Cover or move the furniture into covered storage during inclement weather and during winter months.
*Clean periodically with soft flannel cloth, slightly dampened with a mild soap solution and warm water. DO NOT use abrasive
*All items should be periodically inspected for signs of wear. Also, any accessible hardware should be periodically tightened.
Please contact one of our Product Specialists for assembly assistance or questions at 1-800-491-4958 or email
[email protected]. Specialists are available weekdays 8:00 a.m. to 8:00 p.m. EST or Saturdays 9:30 a.m. to 6:00 p.m.
E C
F
C
B
A
G
E
E D
F
A
B
D
G
E
C
1
3 4
ATTACHED ROCKER (E) TO LEFT SIDE FRAME (D) AS PICTURE
SHOWN, CONNECTING BACK OF ROCKER TO BACK LEGS FIRST
THEN THE FRONT OF ROCKERS. SECURE CONNECTIONS WITH
1 5/8" BOLTS (F).