Grandinroad 6433Q/K User manual

grandinroad®
EMAIL
[email protected]
CONTACT 1.800.491.4958
for assembly questions on
Weekdays // 8am-8pm EST
Saturday // 9:30am-6pm EST
#6433Q/K
Bradford Canopy Bed
Assembly Instructions
WARNING: Failure to follow these directions and
warnings can result in serious injury and/or product damage.
Assistance is required to assemble this bed.
If any parts become missing, damaged or worn, discontinue use until
they are replaced with identical parts.
Never use this bed as a ladder.
!
Do not scoot the bed frame. With a helper, lift the frame and set it down in the
desired location.
!
Do not tip or move the bed frame without first removing the mattress and box springs.
!
Never stand on the bed, the side rails or the cross rails.
!
!
!
Periodically re-tighten all bolts.
!
This item is intended for indoor use only.
!
176982 Bradford Canopy Bed
Assembly Instructions

COMPONENTS
COMPONENTS
Please conrm you have the necessary parts to complete the assembly.
1
LEFT HEADBAORD LEG
B
HEADBOARD CANOPY POST (x2)
C
HEADBOARD LOWER RAIL
D
END CAP (x4)
S
HEADBOARD
F
LEFT FOOTBOARD LEG
G
RIGHT FOOTBOARD LEG
H
FOOTBOARD CANOPY POST (X2)
I
FOOTBOARD
J
CANOPY SIDE RAILS (X2)
M
CROSS RAIL (X3)
N
CENTER LEGS (x3)
O
RIGHT SIDE RAIL
K
LEFT SIDE RAIL
L
RIGHT HEADBOARD LEG
A
HEADBOARD UPPER RAIL
E1
CANOPY CROSS RAILS(x2)
E2

TOOLS
HARDWARE
HARDWARE & TOOLS
Please conrm you have the necessary parts to complete the assembly.
2
1.800.491.4958
ALLEN
WRENCH
SHORT BOLT (X52)
Y
LOCK WASHERS (X8)
Xb
FLAT WASHERS (X8)
Xc
MEDIUM BOLTS (X8)
Xa
LONG BOLT (X2)
Z

ASSEMBLE
ATTACH the Headboard (C) to the
Right Headboard Leg (A) and Left
Headboard Leg (B) by using 8x Medium
Bolts with Washers (X) .
NOTE: Do not overtighten.
3
HELP?
1.800.491.4958
ATTACH the Right Headboard Leg (A)
and Left Headboard Leg (B) to Headboard
Lower Rail (D) and Headboard Upper Rail
(E1) using 6x Short Bolts (Y).
NOTE: Do not overtighten.
2
JOIN the Right Headboard Leg (A) and
Left Headboard Leg (B) to Headboard
Lower Rail (D), Headboard (F), and Head-
board Upper Rail (E1).
NOTE: Ensure holes align.
1
MEDIUM BOLTS (X8)
Xb
Xa
Xc
SHORT BOLTS (X6)
Y
3
RIGHT
HEADBOARD LEG
A
LEFT
HEADBOARD LEG
B
HEADBOARD
F
Headboard
ALLEN WRENCH
P
I
P
E
I
N
S
E
R
T
I
O
N
D
E
T
A
I
L
x
4
A
B
F
E1
D
X
XY
Y
Y
Y
Y
6
x
8
x
HEADBOARD
LOWER RAIL
D
HEADBOARD
UPPER RAIL
E1
x2
x2
LOCK WASHER (X8)
FLAT WASHER (X8)
Xa
Xb
Xc
X

ASSEMBLE
4
Footboard
HELP?
1.800.491.4958
ATTACH the Left Footboard Leg (G) and
Right Footboard Leg (H) to Footboard (J) by
using 4x Short Bolts (Y).
NOTE: Do not overtighten.
5
Y
4
x
4
ALLEN WRENCH
H
GJ
SHORT BOLTS (X4)
Y
LEFT
FOOTBOARD LEG
G
RIGHT
FOOTBOARD LEG
H
FOOTBOARD
J
P
I
P
E
I
N
S
E
R
T
I
O
N
D
E
T
A
I
L
x
2
JOIN the Left Footboard Leg (G) and
Right Footboard Leg (H) to Footboard (J).
NOTE: Ensure holes align.

ASSEMBLE
5
Cross Rails
FASTEN Center Legs (O) to Cross Rails
(N) x3.Tighten with an allen wrench.
NOTE: DO NOT Overtighten.Tighten Evenly.`
6
Y
6
x
HELP?
1.800.491.4958
ALLEN WRENCH
CENTER LEGS (X3)
O
CROSS RAIL (X3)
N
O
N
O
NO
N
SET ASIDE the Cross Rail assembly until it is needed.
BEGIN the platform assembly.
7
SHORT BOLTS (X6)
Y

ASSEMBLE
6
Platform
ATTACH each Center Rail Assembly x3
between Right Side Rail (K) and Left Side
Rail (L) by using 12x Short Bolts (Y).
NOTE: DO NOT Overtighten.
9
Y
1
2
x
PLACE the Cross Rail Assembly x3
between Right Side Rail (K) and Left Side
Rail (L) while aligning holes.
8
HELP?
1.800.491.4958
CROSS RAIL
ASSEMBLY
K
L
ALLEN WRENCH
LEFT SIDE RAIL
L
RIGHT SIDE RAIL
K
CROSS RAIL ASSEMBLY
SHORT BOLTS (X12)
Y

ASSEMBLE
7
Lower Bed
INSERT the Platform Assembly into
the Headboard Assembly and Foot-
board Assembly. Align holes.
10
HELP?
1.800.491.4958
HEADBOARD
ASSEMBLY
PLATFORM
ASSEMBLY
FOOTBOARD
ASSEMBLY
ALLEN WRENCH
P
I
P
E
I
N
S
E
R
T
I
O
N
D
E
T
A
I
L
x
4
PLATFORM
ASSEMBLY
FOOTBOARD
ASSEMBLY
HEADBOARD
ASSEMBLY
ATTACH the Platform Assembly into
the Headboard Assembly and Foot-
board Assembly by using 16x Short
Bolts (Y). NOTE: DO NOT Overtighten.
11
Y
1
6
x
SHORT BOLTS (X16)
Y
x4
x4
x4
x4

ASSEMBLE
8
Canopy
FASTEN the Canopy Cross Rail (E2)
the to Footboard Leg Posts x2 (I) by
using 2x Short Bolts (Y).
13
Y
2
x
INSERT each Footboard Leg Posts x2
(I) into the Canopy Cross Rail (E2) as
shown.
12
HELP?
1.800.491.4958
I
I
FOOTBOARD
CANOPY POST (X2)
I
CANOPY
CROSS RAIL
E2
ALLEN WRENCH
P
I
P
E
I
N
S
E
R
T
I
O
N
D
E
T
A
I
L
x
2
E2
SHORT BOLTS (X2)
Y

ASSEMBLE
9
Canopy
15
Y
2
x
14
HELP?
1.800.491.4958
C
C
ALLEN WRENCH
HEADBOARD
CANOPY POST (X2)
C
P
I
P
E
I
N
S
E
R
T
I
O
N
D
E
T
A
I
L
x
2
FASTEN the Canopy Cross Rail (E2)
the to Headboard Canopy Post x2 (C)
by using 2x Short Bolts (Y).
INSERT Short Rail (D) into Headboard
Canopy Posts x2 (C).
E2
SHORT BOLTS (X2)
Y
CANOPY
CROSS RAIL
E2