Grandinroad Helena 178331 User manual

List of all hardware and components that are included in the packaging
Tools

NOTE : Levelers can be used for adjustment if needed.
Carefully open the drawer by pulling on the pre installed ribbon as shown. Unscrew the Pan Head
Screw (H 4) and Handle Knobs (C) from the interior of the drawer using a Phillips head screwdriver
(not included). Discard the ribbon. Once Handle Knobs (C) have been removed, reinstall them on the
of the drawer using the same pan head screw hardware and Phillips head screwdriver.
Turn the (T 2) clockwise until the screw is snug and make sure the Handle Knobs (C)
are upright and level on the front of the drawer assembly.
FRONT
screwdriver
C
Ribbon

Please contact one of our Product Specialists for assembly assistance or questions at 1 800 491 4958 or [e-mail]
Specialists are available weekdays from 8:00 AM 8:00 PM EST or Saturdays 9:30 AM to 6.00 PM
Lift and place the cabinet do not push on the floor.

2
2
2
2
Strap D
Figure C
1 x Strap