Grandstream Networks GXW42 series User manual

GXW4200 series User Manual www.grandstream.com
Firmware Version 1.0.0.49 [email protected]
Grandstream Networks, Inc.
Analog IP Gateway GXW42XX
16, 24 or 32 FXS Ports
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 2 OF 54
GXW42XX USER MANUAL
INDEX
GNU GPL INFORMATION..........................................................................5
CHANGE LOG ...........................................................................................6
WELCOME.................................................................................................7
GATEWAY GXW42XX OVERVIEW.......................................................................................................7
SAFETY COMPLIANCE ........................................................................................................................7
WARRANTY...........................................................................................................................................7
CONNECT YOUR GXW42XX GATEWAY ..................................................9
EQUIPMENT PACKAGING ...................................................................................................................9
CONNECT THE GXW42XX...................................................................................................................9
GXW42XX FEATURES ............................................................................13
SOFTWARE FEATURES OVERVIEW ................................................................................................13
HARDWARE SPECIFICATION............................................................................................................15
GXW42XX LCD MENU........................................................................................................................17
FIGURE 3: LCD MENUBASIC OPERATIONS.........................................17
BASIC OPERATIONS ..............................................................................18
UNDERSTANDING GXW VOICE PROMPTS.....................................................................................18
PLACING A PHONE CALL ..................................................................................................................19
PHONE OR EXTENSION NUMBERS..........................................................................................19
DIRECT IP CALLS........................................................................................................................20
CALL HOLD.........................................................................................................................................21
CALL WAITING....................................................................................................................................21
CALL TRANSFER................................................................................................................................21
BLIND TRANSFER.......................................................................................................................21
ATTENDED TRANSFER..............................................................................................................22
3-WAY CONFERENCING....................................................................................................................22
HUNTING GROUP ..............................................................................................................................22
INTER-PORT CALLING.......................................................................................................................24
SENDING AND RECEIVING FAX .......................................................................................................25
SUPPORT RADIUS PROTOCOL........................................................................................................25
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 3 OF 54
CALL FEATURES....................................................................................26
CONFIGURATION GUIDE........................................................................28
CONFIGURING GXW42XX VIA VOICE PROMPT .............................................................................28
CONFIGURING GXW42XX WITH WEB BROWSER..........................................................................28
ACCESS THE WEB CONFIGURATION MENU...........................................................................29
IMPORTANT SETTINGS.....................................................................................................................29
NAT SETTINGS............................................................................................................................29
DTMF METHODS.........................................................................................................................30
PREFERRED VOCODER (CODEC)............................................................................................30
SAVING THE CONFIGURATION CHANGES......................................................................................48
REBOOTING FROM REMOTE...........................................................................................................48
CONFIGURATION THROUGH A CENTRAL SERVER .......................................................................48
SOFTWARE UPGRADE...........................................................................50
FIRMWARE UPGRADE THROUGH TFTP/HTTP/HTTPS..................................................................50
INSTRUCTIONS FOR LOCAL FIRMWARE UPGRADE:....................................................................51
CONFIGURATION FILE DOWNLOAD................................................................................................51
FIRMWARE AND CONFIGURATION FILE PREFIX AND POSTFIX ..................................................52
MANAGING FIRMWARE AND CONFIGURATION FILE DOWNLOAD..............................................52
RESTORE FACTORY DEFAULT SETTING .............................................53
FACTORY RESET...............................................................................................................................53
RESET BUTTON..........................................................................................................................53
IVR COMMAND............................................................................................................................53
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 4 OF 54
TABLE OF FIGURES
GXW42XX User Manual
Figure 1: Diagram of GXW4216/24/32 Panel .............................................................................................10
Figure 2: 50 Pin Telco Connector................................................................................................................12
Figure 3: LCD Menu....................................................................................................................................17
TABLE OF TABLES
GXW42XX User Manual
Table 1: Definitions of the GXW Connectors..............................................................................................11
Table 2: Definitions of the GXW Display Panel..........................................................................................11
Table 3: GXW42XX Software Features......................................................................................................13
Table 4: Hardware Specification of GXW42XX series gateways...............................................................15
Table 5: Definitions of the GXW Voice Prompts.........................................................................................18
Table 6: Call Features Table (Star Code)...................................................................................................26
Table 7: Basic Settings...............................................................................................................................31
Table 8: Status Page..................................................................................................................................33
Table 9: Advanced settings ........................................................................................................................33
Table 10: Profile Settings ...........................................................................................................................38
Table 11: FXS Ports Settings .....................................................................................................................47
CONFIGURATION GUI INTERFACE EXAMPLES
GXW42XX User Manual
http://www.grandstream.com/products/gxw_series/gxw42xx/documents/gxw42xx_gui.zip
1. SCREENSHOT OF ADVANCED SETTINGS CONFIGURATION PAGE
2. SCREENSHOT OF BASIC SETTINGS CONFIGURATION PAGE
3. SCREENSHOT OF FXS PORTS CONFIGURATION LOGIN PAGE
4. SCREENSHOT OF PROFILE 1CONFIGURATION PAGE
5. SCREENSHOT OF PROFILE 2CONFIGURATION PAGE
6. SCREENSHOT OF STATUS PAGE
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 5 OF 54
GNU GPL INFORMATION
GXW42xx firmware contains third-party software licensed under the GNU General Public License (GPL).
Grandstream uses software under the specific terms of the GPL. Please see the GNU General Public
License (GPL) for the exact terms and conditions of the license.
Grandstream GNU GPL related source code can be downloaded from Grandstream web site from:
http://www.grandstream.com/support/faq/gnu_gpl .
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 6 OF 54
CHANGE LOG
This section documents significant changes from previous versions of GXW42xx user manuals. Only
major new features or major document updates are listed here. Minor updates for corrections or editing
are not documented here.
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 7 OF 54
WELCOME
Thank you for purchasing the Grandstream GXW42XX Analog FXS IP Gateway. The GXW42XX offers
an easy to manage, easy to configure IP communications solution for any business with virtual and/or
branch locations. The GXW42XX supports popular voice codecs and is designed for full SIP compatibility
and interoperability with third party SIP providers, thus enabling you to fully leverage the benefits of VoIP
technology, integrate a traditional phone system into a VoIP network, and efficiently manage
communication costs.
This manual will help you learn how to operate and manage your GXW FXS Analog IP Gateway and
make the best use of its many upgraded features including simple and quick installation, multi-party
conferencing, and direct IP-IP Calling. This IP Analog Gateway is very easy to manage and scalable,
specifically designed to be an easy to use and affordable VoIP solution for the small – medium business
or enterprise.
GATEWAY GXW42XX OVERVIEW
The new GXW42XX series has a compact and quiet design and offers superb audio quality, rich feature
functionality, strong security protection, and good manageability. It is auto-configurable, remotely
manageable and scalable.
The GXW42XX features 16,24 or 32 port FXS interface for analog telephones, dual 10/100/1000Mbps
network ports, and RJ21 analog port (1 for 4216 and 4224, 2 for 4232). In addition, it supports the option
of 4 SIP Server profiles, caller ID for various countries/regions, T.38 fax, flexible dialing plans, security
protection (SIPS/TLS), comprehensive voice codec including G.711 (a/u-law), G.723.1, G.726(16/24/32/40
bit rates), iLBC and G.729.
SAFETY COMPLIANCE
The GXW42XX is compliant with various safety standards including FCC/CE. Its power adapter is
compliant with UL standard. Warning: use only the power adapter included in the GXW42XX package.
Use of alternative power adapter may permanently damage the unit.
WARRANTY
Grandstream has a reseller agreement with our reseller customers. End users should contact the
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 8 OF 54
company from whom the product was purchased, for replacement, repair or refund.
If you purchased the product directly from Grandstream, contact your Grandstream Sales and Service
Representative for an RMA (Return Materials Authorization) number. Grandstream reserves the right to
change the warranty policy without prior notification.
Caution: Changes or modifications to this product not expressly approved by Grandstream, or operation
of this product in any way other than as detailed by this User Manual, could void your manufacturer
warranty.
Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for
any purpose without the express written permission of Grandstream Networks, Inc. is not permitted.
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 9 OF 54
CONNECT YOUR GXW42XX GATEWAY
Connecting the GXW42XX gateway is easy. Before you begin, please verify the contents of the
GXW42XX package.
EQUIPMENT PACKAGING
Unpack and check all accessories. Equipment includes:
xone device unit
xone RJ45 Ethernet cable
xone 12V 5A universal power adapter
xmount
CONNECT THE GXW42XX
Follow these four (4) steps to connect your GXW42XX gateway to the Internet and access the unit’s
configuration pages.
1. Connect standard touch-tone analog phones to the GXW42XX’s RJ21 port with a RJ11 to R21
cable.
2. Insert an RJ45 Ethernet cable into the WAN port of GXW42XX and connect the other end to an
uplink port (a router or a modem, etc.)
3. Plug the power adapter into the GXW42XX gateway into a power outlet.
Follow the instructions from the topic “Configuring GXW 42XX with Web Browser” for initial configuration.
The GUI pages will guide you through the remaining steps to set-up your gateway. Examples of the GUI
Interfaces can be downloaded from:
http://www.grandstream.com/products/ip-voice-telephony/enterprise-analog-gateways/gxw42xx/GUI.zip
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 10 OF 54
FIGURE 1: DIAGRAM OF GXW4216/24/32 PANEL
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 11 OF 54
TABLE 1: DEFINITIONS OF THE GXW CONNECTORS
Ethernet port
Connect to the internal LAN network or router
RESET
Factory Reset button. Press and hold for a while to reset factory default settings.
DC 12V 5A
Power adapter connection
Analog port
Connect to analog phones / fax machines with an RJ21 to RJ11 cable
FXS ports
FXS port to be connected to analog phones / fax machines.
Note: Once the GXW42XX is turned on and configured, the front display panel indicates the status of the
unit.
TABLE 2: DEFINITIONS OF THE GXW DISPLAY PANEL
Act LED
Remains ON if plug the network cable.
LINK LED
Indicates Ethernet port activity.
FXS LED
Indicate status of the respective FXS Ports on the back panel
Busy - ON (Solid Green)
Available - OFF
Slow blinking FXS LEDs indicates Voice Mail for that port.
All FXS LEDs slow blinking indicates provisioning.
Pin
Signal
Pin
Signal
1
RING1
26
TIP1
2
RING2
27
TIP2
3
RING3
28
TIP3
4
RING4
29
TIP4
5
RING5
30
TIP5
6
RING6
31
TIP6
7
RING7
32
TIP7
8
RING8
33
TIP8
9
RING9
34
TIP9
10
RING10
35
TIP10
11
RING11
36
TIP11
12
RING12
37
TIP12
13
RING13
38
TIP13
14
RING14
39
TIP14
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 12 OF 54
15
RING15
40
TIP15
16
RING16
41
TIP16
17
RING17
42
TIP17
18
RING18
43
TIP18
19
RING19
44
TIP19
20
RING20
45
TIP20
21
RING21
46
TIP21
22
RING22
47
TIP22
23
RING23
48
TIP23
24
RING24
49
TIP24
FIGURE 2: 50 PIN TELCO CONNECTOR
NOTE:
yPins 25 and 50, the last pair, are not used.
yAll LED lights display green when ON.
yLINK LED and ACT LED blinking in following status indicate different network speed.
10M: LINK and ACT all blink,ACT blinks faster then LINK
100M: LINK and ACT all blink,ACT blinks the same fast as LINK
1000M: LINK does not blink, onlyACT blink
ySlow blinking of FXS LED together indicates a firmware upgrade or provisioning state.
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 13 OF 54
GXW42XX FEATURES
The GXW42XX series is a next generation IP voice gateway that is interoperable and compatible with
leading IP-PBXs, Softswitches and SIP platforms. The GXW42XX series FXS gateway is auto-
configurable, remotely manageable and scalable. The GXW42XX series gateways come in three models
- the GXW4216, GXW4224 and GXW4232, each offering superb voice quality, traditional telephony
functionality, easy deployment, and 16, 24 and 32 FXS ports respectively. Each model features flexible
dialing plans, integrated call routing to support a pure IP network call and an external power supply.
SOFTWARE FEATURES OVERVIEW
x16, 24 or 32 FXS ports
xRJ-45 Ethernet ports
x4 configurable SIP profiles
xSupports Voice Codecs:
G711(a/µ, Annex I & II), G723.1A, G726 (ADPCM with 16/24/32/40 bit rates), G729 A/B, iLBC,
T.38 Fax
xComprehensive Dial Plan support for Outgoing calls.
xG.168 Echo Cancellation
xVoice Activation Detection (VAD), Comfort Noise Generation (CNG), and Packet Loss
Concealment (PLC)
xSupports PSTN/PBX analog telephone sets or analog trunks
TABLE 3: GXW42XX SOFTWARE FEATURES
GXW4216 GXW4224 GXW4232
Telephone Interfaces 16 FXS ports 24 FXS ports 32 FXS ports
SIP Provisioning 16 SIP accounts, 4 profiles 24 SIP accounts,4 profiles 32 SIP accounts, 4 profiles
Network Interface 10/100/1000 Mbps, RJ-45 10/100/1000 Mbps, RJ-45 10/100/1000 Mbps, RJ-45
Number of
Concurrent Calls
(except when using
SRTP)
16 Concurrent Calls 24 Concurrent Calls 32 Concurrent Calls,
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 14 OF 54
Voice over Packet
Capabilities
Voice Activity Detection
(VAD) with CNG (comfort
noise generation) and PLC
(packet loss concealment),
LEC with NLP Packetized
Voice Protocol Unit
(supports RTP/RTCP and
AAL2 protocol), G.168
compliant Echo
Cancellation, Dynamic Jitter
Buffer,
Modem detection &
auto-switch to G.711
Voice Activity Detection
(VAD) with CNG (comfort
noise generation
) and PLC
(packet loss concealment),
LEC with NLP Packetized
Voice Protocol Unit
(supports RTP/RTCP and
AAL2 protocol), G.168
compliant Echo
Cancellation, Dynamic Jitter
Buffer,
Modem detection &
auto-switch to G.711
Voice Activity Detection
(VAD) with CNG (comfort
noise generation) and PLC
(packet loss concealment),
LEC with NLP Packetized
Voice Protocol Unit
(supports RTP/RTCP and
AAL2 protocol), G.168
compliant Echo
Cancellation,
Dynamic Jitter
Buffer,
Modem detection &
auto-switch to G.711
Voice Compression
G.711 + Annex I (PLC),
Annex II (VAD/CNG format)
encoder and decoder, G.722
(pending), G.723.1A,
G.726(ADPCM with
16/24/32/40 bit rates),
G.729, iLBC,
G.726 provides
proprietary VAD, CNG, and
signal power estimation,
Voice Play Out unit
(reordering,
fixed and
adaptive jitter buffer, clock
synchronization), AGC
(automatic gain control),
Status output, Decoder
controlling via voice packet
header
G.711 + Annex I (PLC),
Annex II (VAD/CNG format)
encoder and decoder, G.722
(pending), G.723.1A,
G.726(ADPCM with
16/24/32/40 bit rates),
G.729, iLBC,
G.726 provides
proprietary VAD, CNG, and
signal power estimation,
Voice Play Out unit
(reordering, fixed and
adaptive jitter buffer, clock
synchronization), AGC
(automatic gain control),
Status output, Decoder
cont
rolling via voice packet
header
G.711 + Annex I (PLC),
Annex II (VAD/CNG format)
encoder and decoder, G.722
(pending), G.723.1A,
G.726(ADPCM with
16/24/32/40 bit rates),
G.729, iLBC,
G.726 provides
proprietary VAD, CNG, and
signal power estimation,
Voice P
lay Out unit
(reordering, fixed and
adaptive jitter buffer, clock
synchronization), AGC
(automatic gain control),
Status output, Decoder
controlling via voice packet
header
DHCP Server/Client
DHCP Client only DHCP Client only DHCP Client only
Fax over IP
T.38 compliant Group 3 Fax
Relay up to 14.4kpbs and
auto-
switch to G.711 for Fax
Pass-through,
Fax Datapump V.17, V.21,
V.27ter, V.29 for T.38 fax
relay
T.38 compliant Group 3 Fax
Relay up to 14.4kpbs and
auto-
switch to G.711 for Fax
Pass-through,
Fax Da
tapump V.17, V.21,
V.27ter, V.29 for T.38 fax
relay
T.38 compliant Group 3 Fax
Relay up to 14.4kpbs and
auto-
switch to G.711 for Fax
Pass-through,
Fax Datapump V.17, V.21,
V.27ter, V.29 for T.38 fax
relay
QoS
DiffServ, TOS, 802.1P/Q
VLAN tagging
DiffServ,
TOS, 802.1P/Q
VLAN tagging
DiffServ, TOS, 802.1P/Q
VLAN tagging
Transport Protocol RTP/RTCP RTP/RTCP RTP/RTCP
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 15 OF 54
DTMF Method In-audio, RFC2833, and/or SIP Info
IP Signaling
SIP (RFC 3261)
Provisioning TFTP, HTTP, HTTPS
Security
SRTP, IPSEC, TLS/SIPS, HTTPS, 802.1x
Management
Syslog support, HTTP and Telnet access
Dial Plan Yes
3-Way Conference 3-Way conference with local mixing
Caller ID Bellcore Type 1 & 2, ETSI, BT, NTT, FSK and DTMF-based CID
Polarity Reversal /
Wink
Yes
Network
Connectivity
IPv4, IPv6, TCP/UDP, RTP/RTCP, HTTP/HTTPS, ARP/RARP, ICMP, DNS,
DHCP, NTP, TFTP, TELNET, PPPoE, STUN
HARDWARE SPECIFICATION
The hardware specifications of the GXW FXS series are detailed in Table 4.
TABLE 4: HARDWARE SPECIFICATION OF GXW42XX SERIES GATEWAYS
GXW4216 GXW4224 GXW4232
Telephone
Interface 16 FXS Ports 24 FXS Ports 32 FXS Ports
FXS LEDs 16 24 32
Network interface LAN, Single 10/100/1000 BASE-TX,RJ45
Power Input Input:100-240VAC, 50/60Hz
Output: 12V DC, 5.0A
LCD screen
128×32 pixel
Telco connector
1 RJ21 (50 pins) 1 RJ21 (50 pins) 2 RJ21 (50 pins)
RJ-11 connectors Yes
NAND Flash 64MB
DRAM 128MB (+ separate 8MB if with a slave processor)
Function Buttons 1 button for Reset/Factory Reset
Environmental Operation: 0°C to 45°C
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 16 OF 54
Storage: -20°C to 60°C
Humidity: 10Áto 90% Non-condensing
Mounting Desktop and Rack mount
Onhook Voltage Fixed, 48V
Ring Voltage 50Vrms (balanced ringing)
Ring Frequency 20-50Hz
Short Haul Loop 2REN, up to 6000ft on 24 AWG wire
Outdoor Protection Over-voltage Protection and surge immunity
Signaling FXS Loop-start
EMC EN55022/EN55024 and FCC part15 Class B
Safety UL
Compliance FCC, CE, C-Tick
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 17 OF 54
GXW42XX LCD MENU
The GXW42XX gateway series includes a small LCD screen for the display of basic information. The LCD
has a display area of 128x32 pixels, which will allow for 2 lines of text with a 16px height limitation per line.
The LCD menu is showed as Figure 3: LCD Menu. Menu is navigated by the Down-arrow and OK button.
FIGURE 3: LCD MENU
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 18 OF 54
BASIC OPERATIONS
UNDERSTANDING GXW VOICE PROMPTS
GXW42XX has a built-in voice prompt menu for simple device configuration. To enter the voice prompt
menu, press *** on the standard analog phone connected to any FXS port.
TABLE 5: DEFINITIONS OF THE GXW VOICE PROMPTS
Menu
Voice Prompt
User’s Options
Main Menu
“Enter a Menu Option”
Enter “*” for the next menu option
Enter “#” to return to the main menu
Enter “001 – 005, 007, 010, 013 - 017, 047, 086 or 099” Menu
option
Enter “9” for confirming a option
001
“DHCP Mode”, “PPPoE
Mode ”or “Static IP Mode”
Enter ‘9’ to toggle the selection
If user selects “Static IP Mode”, user need configure all the IP
address information through menu 002 to 0
05. If user selects
“Dynamic IP Mode”, the device will retrieve all I
P address
information from DHCP server automatically when user reboots
the device.
002
“IP Address “ + IP address
The current WAN IP address is announced
Enter 12-digit new IP address if in Static IP Mode.
003
“Subnet “ + IP address
Same as Menu option 002
004
“Gateway “ + IP address
Same as Menu option 002
005
“DNS Server “ + IP address
Same as Menu option 002
007
Preferred Vocoder
Enter “9” to go to the next selection in the list:
xPCM U
xPCM A
xiLBC
xG-726
xG-723
xG-729
010
“MAC Address”
Announces the Mac address of the unit.
013
Firmware Server IP
Address
Announces current Firmware Server IP address. Enter 12 digit
new IP address.
014
Configuration Server IP
Address
Announces current Config Server Path IP address. Enter 12 digit
new IP address.
015
Upgrade Protocol
Upgrade protocol for firmware and configuration update. Enter
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 19 OF 54
“9” to toggle between TFTP and HTTP
016
Firmware Version
Firmware version information.
017
Firmware Upgrade
Firmware upgrade mode. Enter “9” to rotate among the following
three options:
1. always check
2. check when pre/suffix changes
3. never upgrade
047
“Direct IP Calling”
Enter the target IP address to make a direct IP call, after dial
tone. (See “Make a Direct IP Call”.)
086
Voice Mail
Number of voice mails
099
“RESET”
Enter “9” to reboot the device; or
Enter MAC address to restore factory default setting
(See Restore Factory Default Setting section)
700-732
Phone calls between
different ports of the same
GW42xx
GXW42xX support inter-port calling from voice menu for easy
test/verification in factory
“700” Ring all ports and connect to first port pick up the call
“701-732” Call individual port
“Invalid Entry”
Automatically returns to Main Menu
Five Success Tips when using the Voice Prompt
1. “*” shifts down to the next menu option
2. “#” returns to the main menu
3. “9” functions as the ENTER key in many cases to confirm an option
4. All entered digit sequences have known lengths - 2 digits for menu option and 12 digits for IP
address. For IP address, add 0 before the digits if the digits are less than 3 (i.e. - 192.168.0.26
should be key in like 192168000026. No decimal is needed).
5. Key entry cannot be deleted but the phone may prompt error once it is detected
PLACING A PHONE CALL
PHONE OR EXTENSION NUMBERS
1. Dial the number directly and wait for 4 seconds (To change the default value, modify the following
setting - “No Key Entry Timeout”)
or
2. Dial the number directly and press # (Use # as dial key” must be configured in web configuration).
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 20 OF 54
Examples:
1. Dial a number (e.g. [phone]), first enter the prefix number (usually 1+ or international
code) followed by the phone number. Press # or wait for 4 seconds. Check with your VoIP
service provider for further details on prefix numbers.
DIRECT IP CALLS
Direct IP calling allows two parties, that is, a FXS Port with an analog phone and another VoIP Device, to
talk to each other in an ad hoc fashion without a SIP proxy.
Elements necessary to completing a Direct IP Call:
1. Both GXW42XX and other VoIP Device, have public IP addresses, or
2. Both GXW42XX and other VoIP Device are on the same LAN using private IP addresses, or
3. Both GXW42XX and other VoIP Device can be connected through a router using public or private
IP addresses (with necessary port forwarding or DMZ).
GXW42XX supports two ways to make Direct IP Calling:
Using IVR
1. Pick up the analog phone then access the voice menu prompt by dial “***”
2. Dial “047” to access the direct IP call menu
3. Enter the IP address using format ex. 192*168*0*160 after the dial tone.
Using Star Code
1. Pick up the analog phone then dial “*47”
2. Enter the target IP address using same format as above.
Note: NO dial tone will be played between step 1 and 2.
Destination ports can be specified by using “*” (encoding for “:”) followed by the port number.
Examples:
a) If the target IP address is 192.168.0.160, the dialing convention is
*47 or Voice Prompt with option 047, then 192*168*0*160.
followed by pressing the “#” key if it is configured as a send key or wait 4 seconds. In this case,
the default destination port 5060 is used if no port is specified.
b) If the target IP address/port is 192.168.1.20:5062, then the dialing convention would be:
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-grandstream-gxw4216