GRASS VALLEY STORM 3G - SETUP GUIDE 09-2010 User manual

www.grassvalley.com
STORM 3G
Setup Guide
F0951009061
September 2010

STORM3G ― SetupGuide
Copyright Copyright 2010 Technicolor dba Grass Valley.
All rights reserved. Portions of software © 2000
– 2010, Microsoft Corporation. All rights reserved.
This document may not be copied in whole
or in part, or otherwise reproduced except as
specifically permitted under U.S. copyright law,
without the prior written consent of Grass Valley,
Inc., P.O. Box 59900, Nevada City, California
95959-7900. This product may be covered by one
or more U.S. and foreign patents.
Disclaimer Product options and specifications subject to
change without notice. The information in this
manual is furnished for informational use only, is
subject to change without notice, and should not
be construed as a commitment by Grass Valley,
Inc. Grass Valley, Inc. assumes no responsibility
or liability for any errors or inaccuracies that may
appear in this publication.
U.S.
Government
Restricted
Rights Legend
Use, duplication, or disclosure by the United States
Government is subject to restrictions as set forth
in subparagraph (c)(1)(ii) of the Rights in Technical
Data and Computer Software clause at DFARS
252.277-7013 or in subparagraph c(1) and (2) of
the Commercial Computer Software Restricted
Rights clause at FAR 52.227-19, as applicable.
Manufacturer is Grass Valley, Inc., P.O. Box 59900,
Nevada City, California 95959-7900 U.S.A.
Trademarks
and Logos
Grass Valley, K2, Aurora, Summit, Dyno, Solo,
Infinity, Turbo, Profile, Profile XP, NetCentral,
NewsBrowse, NewsEdit, NewsQ, NewsShare,
NewsQ Pro, and Media Manager are either
registered trademarks or trademarks of Grass
Valley, Inc. in the United States and/or other
countries. Grass Valley, Inc. products are covered
by U.S. and foreign patents, issued and pending.
Additional information regarding Grass Valley,
Inc. trademarks and other proprietary rights may
be found at www.grassvalley.com.

STORM3G ― SetupGuide 3
Other trademarks and logos used in this document
are either registered trademarks or trademarks of
the manufacturers or vendors of the associated
products, such as Microsoft® Windows® operating
system, Windows Media® player, Internet
Explorer® internet browser, and SQL Server™.
QuickTime and the QuickTime logo are trademarks
or registered trademarks of Apple, Inc., used under
license therefrom. Intel, Pentium, Xeon and Core
Duo are the trademarks or registered trademarks
of Intel Corporation or its subsidiaries in the United
States of America and other countries. Adobe,
Adobe logo and Adobe Reader are registered
trademarks of Adobe Systems Incorporated.
Dolby, Dolby and the Double D symbol are
registered trademarks of Dolby Laboratories. They
are manufactured based on their own license.
HDV and HDV logos are the trademarks of Sony
Corporation and Victor Company of Japan, Limited
(JVC). HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.

STORM3G ― SetupGuide
Manual
Explanation
If there are any variations between the
explanation in this manual and the actual
application method, priority is given to the
actual application method.
The screens used as examples in this manual
are those of the development stage, so they
may vary from those in the final product.
This manual is written for people who have a
basic knowledge of how to use a computer.
If there are no special instructions, perform
the same operation as a normal computer
operation.
In this manual, Microsoft® Windows® 7
operating system is described as Windows 7
(collective term of Ultimate, Professional, Home
Premium, and Home Basic).
In this manual, Microsoft® Windows Vista®
operating system is described as Windows
Vista (collective term of Ultimate, Business,
Home Premium, and Home Basic).
In this manual, Microsoft® Windows® XP
Professional operating system is described as
Windows XP.
•
•
•
•
•
•
Revision
Status Rev Date Description
September 6, 2010 Release F0951009061

STORM3G ― SetupGuide
Contents
Safety Summaries..............................................6
Warranty ....................................................... 10
Résumé des mesures de sécurité ......................... 11
Garantie........................................................ 16
1 Before Using
Before Using .................................................. 17
Contacting Grass Valley..................................... 20
2 Hardware Setting
Part names .................................................... 22
Setting the Main Board...................................... 23
Setting the HTX-OP1 (Optional) ........................... 24
Installing EDIUS .............................................. 27
Confirmation after installation............................. 27
EDID Monitor .................................................. 31
3 Starting Up EDIUS and Creating New Project
Starting Up EDIUS............................................ 32
Creating a New Project...................................... 33
4 Setting Editing Environments
Storing Device Presets...................................... 36
Setting a Preview Device ................................... 53
5 Hardware Specifications
STORM 3G Main Board (STORM 3G)...................... 57
STORM 3G Expansion board (HTX-OP1)(Optional) .... 58

SafetySummaries
STORM3G ― SetupGuide
Safety Summaries
General Safety Summary
Review the following safety precautions to avoid
injury and prevent damage to this product or any
products connected to it.
While using this product, you may need to access
other parts of the system. Read the General Safety
Summary in other system manuals for warnings and
cautions related to operating the system.
Injury Precautions
Do Not Operate Without Covers
To avoid electric shock or re hazard, do not operate
this product with covers or panels removed.
Do Not Operate in Wet/Damp Conditions
To avoid electric shock, do not operate this product in
wet or damp conditions.
Do Not Operate in an Explosive Atmosphere
To avoid injury or re hazard, do not operate this
product in an explosive atmosphere.
Avoid Exposed Circuitry
To avoid injury, remove jewelry such as rings, watches,
and other metallic objects. Do not touch exposed
connections and components when power is present.
Product Damage Precautions
Use Proper Power Source
Do not operate this product from a power source that
applies more than the voltage specied.

STORM3G ― SetupGuide
SafetySummaries
Provide Proper Ventilation
To prevent product overheating, provide proper
ventilation.
Do Not Operate With Suspected Failures
If you suspect there is damage to this product, have it
inspected by qualied service personnel.
Safety Terms and Symbols
Terms in This Manual
These terms may appear in this manual:
WARNING: Warning statements identify
conditions or practices that can result in
personal injury or loss of life.
CAUTION: Caution statements identify
conditions or practices that may result in
damage to equipment or other property, or
which may cause equipment crucial to your
business environment to become temporarily
non-operational.
Terms on the Product
These terms may appear on the product:
DANGER indicates a personal injury hazard
immediately accessible as one reads the marking.
WARNING indicates a personal injury hazard not
immediately accessible as you read the marking.
CAUTION indicates a hazard to property including
the product.

SafetySummaries
STORM3G ― SetupGuide
Symbols on the Product
The following symbols may appear on the product:
DANGER high voltage
Protective ground (earth) terminal
ATTENTION – refer to manual
Service Safety Summary
WARNING: The service instructions in this
manual are intended for use by qualied
service personnel only. To avoid personal
injury, do not perform any servicing unless
you are qualied to do so. Refer to all safety
summaries before performing service.
Do Not Service Alone
Do not perform internal service or adjustment of this
product unless another person capable of rendering
rst aid and resuscitation is present.
Disconnect Power
To avoid electric shock, disconnect the main power
by means of the power cord or, if provided, the power
switch.
Use Care When Servicing With Power On
Dangerous voltages or currents may exist in this
product. Disconnect power and remove baery
(if applicable) before removing protective panels,
soldering, or replacing components.
To avoid electric shock, do not touch exposed
connections.

STORM3G ― SetupGuide
SafetySummaries
Certifications and Compliances
FCC Emission Control
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instruction manual, may cause harmful interference
to radio communications. Operation of this equipment
in a residential area is likely to cause harmful
interference in which case the user will be required to
correct the interference at his own expense. Changes
or modications not expressly approved by Grass
Valley can aect emission compliance and could void
the user’s authority to operate this equipment.
Canadian EMC Notice of Compliance
This digital apparatus does not exceed the Class A
limits for radio noise emissions from digital apparatus
set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This product must not be used in residential areas.
EMC Directive
Class A Warning
This product must not be used in residential areas.
FCC Emission Limits
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesirable operation.

Warranty
10 STORM3G ― SetupGuide
Warranty
This product is covered by a limited warranty when
you register your Grass Valley product. This warranty
is for a period of one year (or two years in European
Union countories) from the date of purchase from
Grass Valley or an authorized Grass Valley agent. This
warranty applies only to the original purchaser of the
Grass Valley product and is not transferable, Grass
Valley warrants that for this period the product will be
in good working order. Should our product fail to be
in good working order, Grass Valley will, at its option,
repair or replace it at no additional charge, provided
that the product has not been subjected to misuse,
abuse or non-Grass Valley authorized alternations,
modications and/or repair. Proof of purchase is
required to validate your warranty.
Grass Valley is not responsible for any lost prots, lost
savings or other incidental or consequential damages
arising out of the use of, or inability to use, this
product. This includes damage to property and, to the
extent permied by law, damages for personal injury.
This warranty is in lieu of all other warranties of
merchantability and tness for a particular purpose.

STORM3G ― SetupGuide 11
Résumédesmesuresdesécurité
Résumé des mesures de sécurité
Résumé des mesures de sécurité générales
Consultez les mesures de sécurité suivantes an
d’éviter toute blessure corporelle et dommage au
produit, et pour tous les produits qui y sont connectés.
Lors de l’utilisation de ce produit, il est possible que
vous ayez à accéder à d’autres parties du système.
Consultez le Résumé des mesures de sécurité
générales du manuel des autres systèmes pour prendre
connaissance des mises en garde et des avertissements
relatifs à leur utilisation.
Précautions relatives aux blessures
Ne pas faire fonctionner le produit sans couvercle
An d’éviter un choc électrique ou un risque
d’incendie, ne faites pas fonctionner ce produit lorsque
que les couvercles ou les panneaux sont retirés.
Ne pas faire fonctionner le produit dans des conditions
humides
An d’éviter un choc électrique, ne faites pas
fonctionner ce produit dans des conditions humides.
Ne pas faire fonctionner le produit dans une
atmosphère explosive
An d’éviter une blessure corporelle ou un risque
d’incendie, ne faites pas fonctionner ce produit dans
une atmosphère explosive.
Éviter les circuits à nu
An d’éviter une blessure corporelle, retirez tous
vos boux, tels que bagues, montres et autres objets
métalliques. Ne touchez pas les connexions ni les
composants à nu lorsque l’appareil est sous tension.

Résumédesmesuresdesécurité
12 STORM3G ― SetupGuide
Précautions relatives aux dommages au produit
Utiliser une source d’alimentation appropriée
Ne faites pas fonctionner ce produit avec une source
d’alimentation qui applique une tension supérieure à
celle spéciée.
Prévoir une ventilation adéquate
An d’empêcher une surchaue du produit, prévoyez
une ventilation adéquate.
Ne pas faire fonctionner le produit en cas de soupçons
de panne
Si vous remarquez que ce produit est endommagé,
faites-le examiner par un personnel d’entretien
qualié.
Termes et symboles de sécurité
Termes utilisés dans ce manuel
Les termes suivants peuvent apparaître dans ce
manuel :
MISE EN GARDE: Les indications de mise en
garde identient des conditions ou des pratiques
qui peuvent provoquer des blessures corporelles
ou le décès.
AVERTISSEMENT: Les indications
d’avertissement identient des conditions ou des
pratiques qui peuvent provoquer des dommages à
l’équipement ou à d’autres biens, ou qui peuvent
rendre temporairement non opérationnel un
équipement indispensable à l’environnement de
votre activité.

STORM3G ― SetupGuide 13
Résumédesmesuresdesécurité
Termes relatifs au produit
Les termes suivants peuvent apparaître sur le produit :
DANGER indique un risque de blessure corporelle
immédiatement accessible lors de la lecture de
l’inscription.
MISE EN GARDE indique un risque de blessure
corporelle non immédiatement accessible lors de la
lecture de l’inscription.
AVERTISSEMENT indique un risque relatif aux biens,
y compris le produit.
Symboles sur le produit
Les symboles suivants peuvent apparaître sur le
produit :
DANGER haute tension
Prise de mise à la masse (terre)
ATTENTION – consultez le manuel
Résumé des mesures de sécurité d’entretien
MISE EN GARDE: Les instructions d’entretien
de ce manuel sont destinées uniquement à du
personnel d’entretien qualié. An d’éviter
toute blessure corporelle, ne procédez à aucun
entretien à moins de posséder les qualications
requises. Consultez tous les résumés des mesures
de sécurité avant de procéder à l’entretien.
Ne pas procéder seul à l’entretien
Ne procédez pas à un entretien ou à un ajustement
interne de ce produit à moins qu’une autre personne
en mesure de prodiguer les premiers soins ou une
réanimation ne soit présente.

Résumédesmesuresdesécurité
14 STORM3G ― SetupGuide
Débrancher l’alimentation
An d’éviter un choc électrique, coupez l’alimentation
principale au moyen du cordon d’alimentation ou, le
cas échéant, de l’interrupteur d’alimentation.
Faire preuve de prudence lors de l’entretien lorsque
l’appareil est sous tension
Ce produit peut être le cadre de tensions et d’intensités
dangereuses. Débranchez l’alimentation et retirez la
pile (le cas échéant) avant de retirer les panneaux de
protection, de procéder à une soudure ou de remplacer
des composants.
An d’éviter un choc électrique, ne touchez pas les
connexions à nu.
Certifications et conformités
Contrôle d’émission du FCC
Le présent équipement a été testé et approuvé comme
répondant aux normes des dispositifs numériques de
classe A, conformément à la Partie 15 des règlements
du FCC. Ces limites sont conçues pour fournir
une protection raisonnable contre les brouillages
préjudiciables dans un environnement commercial.
Cet appareil produit, utilise et peut dégager de
l’énergie radioélectrique et, s’il n’est pas installé et
utilisé selon les instructions, il peut être la source
d’interférences gênantes pour les communications
radio. L’utilisation de cet appareil dans une zone
résidentielle peut également causer des interférences
gênantes, auquel cas l’utilisateur s’engage à mere
n à ces interférences à ses frais. Les changements et
modications non expressément approuvés par Grass
Valley peuvent inuer sur la conformité des émissions
et pourraient annuler l’autorisation de l’utilisateur à
utiliser cet appareil.

STORM3G ― SetupGuide 1
Résumédesmesuresdesécurité
Avis de conformité de la CEM pour le Canada
Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant les limites applicables aux
appareils numériques de la classe A prescrites dans le
Règlement sur le brouillage radioélectrique édicté par
le ministère des Communications du Canada.
Ce produit ne doit pas être utilisé dans des zones
résidentielles.
Directive CEM
Avertissement relatif à la classe A
Ce produit ne doit pas être utilisé dans des zones
résidentielles.
Limites d’émission du FCC
Cet appareil est conforme à la partie 15 des
règlements du FCC. Son utilisation est soumise
aux deux conditions suivantes : (1) Cet appareil ne
doit pas provoquer d’interférences nuisibles, et (2)
cet appareil doit tolérer toute interférence reçue, y
compris des interférences qui pourraient provoquer un
fonctionnement indésirable.

Garantie
16 STORM3G ― SetupGuide
Garantie
Ce produit est couvert par une garantie limitée lors
de l'enregistrement de votre produit Grass Valley.
Cee garantie est valide pour une période d’un an (ou
de deux ans dans les pays de l’Union européenne) à
partir de la date d’achat de Grass Valley ou un agent
autorisé de Grass Valley. Cee garantie ne s'applique
qu'à l'acheteur initial du produit Grass Valley et
elle ne peut être transférée. Grass Valley garantit le
bon fonctionnement du produit pendant la période
indiquée. Grass Valley s'engage à réparer ou remplacer
le produit, sans frais supplémentaires, si le produit
venait à présenter un défaut de fonctionnement qui ne
soit pas le résultat d'une mauvaise manipulation, d'un
abus ou de toute opération, modication ou réparation
non autorisées par Grass Valley. La garantie du produit
ne peut être validée que sous présentation d'une
évidence d'achat.
Grass Valley ne peut être tenu pour responsable
des pertes de bénéces, pertes d'argent ou autres
dommages accessoires ou indirects résultant de
l'utilisation de ce produit ou de l'impossibilité de
l'utiliser. Cela inclut les dommages matériels et, dans
les limites légales, les dommages corporels. Cee
garantie remplace toutes les autres garanties de valeur
marchande et d'adéquation à un usage particulier.

STORM3G ― SetupGuide 1
Section 1
Before Using
Before Using
Operation environment
Notes
EDIUS operation is not necessarily
guaranteed even in the environments
satisfying all conditions below.
•
PC
CPU: Intel Pentium 4, Xeon, Core Duo, or higher
CPU supporting SSE2 instructions or higher is
essential for operating EDIUS.
EDIUS complies with multi-processor and hyper
threading technology.
PCI bus
PCI Express x4 (PCI Express Spec. Revision 1.1 or later) x1
Hard disk drive
6GB or larger space required for soware installation.
Drive with ATA100 / 7200rpm or faster is necessary for
video storage.
RAID 0 is recommended for HD resolution editing.
The disc space of twice as large as the size of the le
to be edited is required in HDD.
*
*
*
*

Section 1 ― Before Using
18 STORM 3G ― Setup Guide
Graphics
Graphics Processing Unit supporting Direct 3D 9.0c or
later or PixelShader Model 3.0 or later is required.
1024 x 768pixel 32bit display or higher is available.
Some DirectDraw overlay functions cannot be used.
Memory and Video Memory
The operating conditions of memory and video
memory are as follows:
Angle of View SD or smaller HD or smaller Larger than
HD
depth 8bit 10bit 8bit 10bit 8bit/10bit
32bit OS - -
64bit OS
Memory Minimum
1GB 2GB 2GB 4GB 4GB
Recommended
2GB 4GB 4GB 4GB 4GB
Video
Memory
Minimum
256MB 512MB 512MB 1GB 2GB
Recommended
512MB 1GB 1GB 2GB 2GB
Sound system
Support for WDM driver is required.
Optical drive
DVD-ROM drive required for soware installation.
For storage on a BD or DVD disc, a supporting drive
is required.
OS
Windows 7 (32bit/64bit)
Windows Vista SP2 or later (32bit/64bit)
Windows XP SP3 or later (32bit)
Internet Explorer 8 or later
However, the operation in the virtual operation
systems such as Virtual PC, VMWare, and Windows
XP mode of Windows 7 is not guaranteed.
*
*
*

STORM3G ― SetupGuide 1
BeforeUsing
USB port
One USB port required (USB 1.1 or higher, for use of
the USB key)
Miscellaneous
Availability of Internet access and e-mail address
required
This is necessary for activation, user registration,
and updating of soware and receiving support.
Limitations
Following are limitations to use this product. Please
also see the Readme text included in the installation
DVD-ROM for the latest information.
Stand-by mode
Set stand-by mode for screen saver and monitor power
supply to "OFF" when using this product.
*

Section1 ― BeforeUsing
20 STORM3G ― SetupGuide
Contacting Grass Valley
International
Support
Centers
France
24 x 7
+800 8080 2020
or
+33 1 48 25 20
20
United
States/
Canada
24 x 7
+1 800 547 8949 or
+1 530 478 4148
Local Support
Centers
(available
during normal
business
hours)
Asia
Hong Kong, Taiwan, Korea, Macau: +852 2531
3058
Indian Subcontinent: +91 22 24933476
Southeast Asia/Malaysia: +603 7805 3884
Southeast Asia/Singapore: +65 6379 1313
China: +861 0660 159 450 Japan: +81 3 5484 6868
Australia and New Zealand:
+61 1300 721 495
Central/South
America: +55 11 5509
3443
Middle East: +971 4 299 64 40
Near East and Africa:
+800 8080 2020 or +33 1 48 25 20 20
Europe
Belarus, Russia, Tadzikistan, Ukraine,
Uzbekistan: +7 095 2580924 225
Switzerland: +41 1 487 80 02
S. Europe/Italy-Roma: +39 06 87 20 35 28
-Milan: +39 02 48 41 46 58
S. Europe/Spain: +34 91 512 03 50
Benelux/Belgium: +32 (0) 2 334 90 30
Benelux/Netherlands: +31 (0) 35 62 38 42 1
N. Europe: +45 45 96 88 70
Germany, Austria, Eastern Europe: +49 6150 104
444
UK, Ireland, Israel: +44 118 923 0499
Other manuals for STORM 3G - SETUP GUIDE 09-2010
1
This manual suits for next models
1
Table of contents
Other GRASS VALLEY Computer Hardware manuals

GRASS VALLEY
GRASS VALLEY 8977AP-4B User manual

GRASS VALLEY
GRASS VALLEY IQUCP25 User manual

GRASS VALLEY
GRASS VALLEY VX-Vertigo-XG21-e Datasheet

GRASS VALLEY
GRASS VALLEY 8977AP-4U User manual

GRASS VALLEY
GRASS VALLEY STORM 3G - User manual

GRASS VALLEY
GRASS VALLEY HDSPARK User manual

GRASS VALLEY
GRASS VALLEY FIRECODER BLU User manual

GRASS VALLEY
GRASS VALLEY K-FRM-X-UPG-LX-KIT User manual

GRASS VALLEY
GRASS VALLEY 8900GEN-SM GeckoFlex User manual

GRASS VALLEY
GRASS VALLEY HDSPARK PRO User manual