Great American Deluxe Paw Pal KPAW3 User manual

INSTALLATION GUIDE
Deluxe
Paw Pal®
Pet Waste
Station
ITEM: KPAW3
D
A
C
B
GREAT AMERICAN’S
DELUXE PAW PAL®
STATIONS:
HLifetime Guarantee
HRust-Proof Construction
HUniversal Fit holds all bags on
header cards or rolls
SAVE UP TO 30%
ON EVERY BAG
PURCHASE WITH OUR
VIP REFILL PROGRAM!
HVolume Discount Pricing—
lock in prices at your annual
quantity!
HFlexible Delivery— adjust
your order frequency and
quantities at any time.
HNo obligations— this program
is designed to save you money,
not lock you into commitments.
Pause and restart at any time!
PLUS... AS A VIP
CUSTOMER YOU RECEIVE
12 FREE BONUS GIFTS—
A $468 VALUE!
CALL & JOIN TODAY!
REV 8/18
Deluxe
Station
KPAW3
Need Help? Give us a call! Great American •1-800-231-0329 •www.gabpproperty.com
Deluxe Plastic Kit Includes:
A. 1 12”x18” Aluminum Sign
(Item PS62, PSD108, PS74 or similar)
B. 1 Dispenser Box (Item PAWBOX)
C. 1 8-ft Steel Sign Post (Item SP8)
D. 1 10-gal Waste Receptacle with attached lid
(Item SMR10)
E. 3 Mounting Hardware Sets— each set
includes 2 nuts, bolts and washers
(Item SSH103)
F. 80 Pet Waste Bags (Item PAWBAG)
G. 50 Waste Receptacle Liners
H. 100 Pet Station Notification Door Hangers
(Item 211)
Optional Tools Needed:
• Socket Driver or Adjustable Wrench
• Level
• Post Hole Driver
G
F
E

2. Station Assembly
1. Pole Installation
Using a post hole driver (not included), drive the sign post (C) approximately 15-18” into
the ground. Make sure that the “hollow” or “recessed” side of the post is facing where
you want the front of the unit to face. We recommend that the pole is no less than 15”
underground to support the weight of the waste receptacle (D) properly. Use a level (not
included) to ensure the pole is standing upright and will properly support the unit. Adjust
if necessary.
Need Help? Give us a call! Great American •1-800-231-0329 •www.gabpproperty.com
3. Station Preparation
18”
17”
12”
24”
6”
18”
1” 1. Using the first hardware set (E), secure the sign (A) to the top of the steel post (C) with
a bolt and washer at the top of the sign and another at the bottom. The washers should
be next to the printed side (front) of the sign and the nuts are secured on the outside/
back of the post. To ensure the best outcome, make sure the sign is flush with the top of
the pole.
2. Using the second hardware set (E), attach the dispenser box (B) directly under the
sign leaving about 1” in-between. Open the box, align the holes to the steel post and
attach with the two bolts. The washers should be used on the inside of the box with the
nuts secured to the outside/back of the post.
3. Using the final hardware set (E), secure the waste receptacle (D) to the steel post
at the top and the bottom with the washers facing the inside of the waste can and the
nuts on the outside/back of the post. Make sure that the receptacle is approximately
12 inches below the dispenser box to allow for the lid to be open and trash to be easily
removed. This should leave your receptacle approximately 6 inches off the ground which
will help prevent any damage to the station from bad weather conditions.
1. Insert one waste liner (G) into the waste receptacle and fold over the rim. Open the
dispenser box and insert up to 10 header cards of bags (F) onto the prongs inside the
dispenser. Close the station, pull the top bag through the hole and you’re all set!
Note: This dispenser fits all types of bags. If you are using boxed bags (PAWBAG3), you will need
to slip a converter (Great American Item PAW22) onto the prongs inside the dispenser and insert
the boxes into the converter.
2. Distribute the enclosed Door Hangers (H) to residents/tenants alerting them to utilize
your new pet waste station.
Please contact us immediately if you have any missing or damaged items
or need any additional assistance. Thank you.