Great American Starter Plastic Paw Pal KPAW15 User manual

INSTALLATION GUIDE
Starter
Plastic
Paw Pal®
Pet Waste
Station
ITEM: KPAW15
A
B
GREAT AMERICAN’S
STARTER PLASTIC
PAW PAL®STATIONS:
H10-year Money-Back Guarantee
HBoxes lock for extra security
HUniversal Fit holds any brand of
pet waste bags!
SAVE BIG AND NEVER RUN
OUT OF BAGS AGAIN—
JOIN OUR VIP REFILL
PROGRAM TODAY!
HFree Shipping on every
refill bag order!
HVolume Discount Pricing—
lock in prices at your annual
quantity!
HFlexible Delivery— adjust
your order frequency and
quantities at any time.
HNo obligations— this program
is designed to save you money,
not lock you into commitments.
Pause and restart at any time!
CALL & JOIN TODAY!
REV 9/23
Starter
Plastic
Station
KPAW15
Need Help? Give us a call! Great American •1-800-231-0329 •www.gabpproperty.com
C
Starter Plastic Kit Includes:
A. 1 12”x12” Aluminum Sign (Item PS25)
B. 1 Dispenser Box with Key (Item PAWBOX15)
C. 1 7-ft Steel Sign Post (Item SP7)
D. 2 Mounting Hardware Sets— each set
includes 2 nuts, bolts and washers
E. 200 Pet Waste Bags (Item PAWBAG3)
Optional Tools Needed:
• Socket Driver or Adjustable Wrench
• Level
• Post Hole Driver
D
E

2. Station Assembly
1. Pole Installation
Using a post hole driver (not included), drive the sign post (C) approximately 15-18” into
the ground. Make sure that the “hollow” or “recessed” side of the post is facing where
you want the front of the unit to face. Use a level (not included) to ensure the pole is
standing upright and will properly support the unit. Adjust if necessary.
Need Help? Give us a call! Great American •1-800-231-0329 •www.gabpproperty.com
3. Station Preparation
18”
1. Using the first hardware set (D), secure the sign (A) to the top of the steel post (C) with
a bolt and washer at the top of the sign and another at the bottom. The washers should
be next to the printed side (front) of the sign and the nuts are secured on the outside/
back of the post. To ensure the best outcome, make sure the sign is flush with the top of
the pole.
2. Using the second hardware set (D), attach the dispenser box (B) directly under the
sign leaving about 1” in-between. Open the box, align the holes to the steel post and
attach with the two bolts. The washers should be used on the inside of the box with the
nuts secured to the outside/back of the post.
Open the dispenser box and insert the included box of bags (E) inside the dispenser.
(Note: Each dispenser box holds up to 3 boxes of pet waste bags). Close and lock the
station, pull the top bag through the hole and you’re all set!
Please contact us immediately if you have any missing or damaged items
or need any additional assistance. Thank you.