Great American Deluxe Plastic Paw Pal KPAW20 User manual

INSTALLATION GUIDE
Deluxe
Plastic
Paw Pal®
Pet Waste
Station
ITEM: KPAW20, KPAW31, KPAW32, KPAW33, KPAW41, KPAW42
D
A
C
B
GREAT AMERICAN’S
DELUXE PLASTIC
PAW PAL®STATIONS:
H10-year Money-Back Guarantee
HBoxes lock for extra security
HUniversal Fit holds any brand of
pet waste bags!
SAVE 20%
PLUS FREE SHIPPING
ON EVERY BAG
PURCHASE WITH OUR
VIP REFILL PROGRAM!
HVolume Discount Pricing—
lock in prices at your annual
quantity!
HFlexible Delivery— adjust
your order frequency and
quantities at any time.
HNo obligations— this program
is designed to save you money,
not lock you into commitments.
Pause and restart at any time!
CALL & JOIN TODAY!
REV 1/23
Deluxe
Plastic
Station
KPAW20
Need Help? Give us a call! Great American •1-800-231-0329 •www.gabpproperty.com
Deluxe Plastic Kit Includes:
A. 1 12”x12” Aluminum Sign (Item KPAW20)
or 12”x18” Aluminum Sign
(Items KPAW31, KPAW32, KPAW33,
KPAW41, KPAW42)
B. 1 Dispenser Box with Key (Item PAWBOX15)
C. 1 7-ft Steel Sign Post (Item SP7)
D. 1 Plastic Trash Receptacle with attached lid
(Item PTC2)
E. 3 Mounting Hardware Sets— each set
includes 2 nuts, bolts and washers
(Item SSH103)
F. 200 Pet Waste Bags (Item PAWBAG3)
G. 50 Trash Receptacle Liners
Optional Tools Needed:
• Socket Driver or Adjustable Wrench
• Level
• Post Hole Driver
E
F
G

2. Station Assembly
1. Pole Installation
Using a post hole driver (not included), drive the sign post (C) approximately 15-18”
into the ground. Make sure that the “hollow” or “recessed” side of the post is facing
where you want the front of the unit to face. We recommend that the pole is no less
than 15” underground to support the weight of the waste receptacle (D) properly. Use
a level (not included) to ensure the pole is standing upright and will properly support
the unit. Adjust if necessary.
Need Help? Give us a call! Great American •1-800-231-0329 •www.gabpproperty.com
3. Station Preparation
18”
1. Using the first hardware set (E), secure the sign (A) to the top of the steel post (C)
with a bolt and washer at the top of the sign and another at the bottom. The washers
should be next to the printed side (front) of the sign and the nuts are secured on the
outside/back of the post. To ensure the best outcome, make sure the sign is flush with
the top of the pole.
2. Using the second hardware set (E), attach the dispenser box (B) directly under the
sign leaving about 1” in-between. Open the box, align the holes to the steel post and
attach with the two bolts. The washers should be used on the inside of the box with the
nuts secured to the outside/back of the post.
3. Using the final hardware set (E), secure the trash receptacle (D) to the steel post at
the top and the bottom with the washers facing the inside of the trash can and the nuts
on the outside/back of the post. Make sure that the receptacle is approximately 12
inches below the dispenser box to allow for the lid to be open and trash to be easily
removed. This should leave your receptacle approximately 6 inches off the ground
which will help prevent any damage to the station from bad weather conditions.
Insert one trash liner (G) into the waste receptacle and fold over the rim. Open the
dispenser box and insert the included box of bags (F) inside the dispenser. (Note: Each
dispenser box holds up to 3 boxes of pet waste bags). Close and lock the station, pull
the top bag through the hole and you’re all set!
Please contact us immediately if you have any missing or damaged items
or need any additional assistance. Thank you.