Great American Starter Paw Pal KPAW9 User manual

INSTALLATION GUIDE
Starter
Paw Pal®
Pet Waste
Station
ITEM: KPAW9
A
C
B
GREAT AMERICAN’S
STARTER PAW PAL®
STATIONS:
H100% Lifetime Guarantee
HRust-Proof Construction
HUniversal Fit holds all bags on
header cards or rolls
SAVE UP TO 30%
ON EVERY BAG
PURCHASE WITH OUR
VIP REFILL PROGRAM!
HVolume Discount Pricing—
lock in prices at your annual
quantity!
HFlexible Delivery— adjust
your order frequency and
quantities at any time.
HNo obligations— this
program is designed to save
you money, not lock you into
commitments. Pause and
restart at any time!
PLUS... AS A VIP
CUSTOMER YOU RECEIVE
12 FREE BONUS GIFTS—
A $468 VALUE!
CALL & JOIN TODAY!
REV 8/18
Starter
Station
KPAW9
Need Help? Give us a call! Great American •1-800-231-0329 •www.gabpproperty.com
Starter Kit Includes:
A. 1 12”x18” Aluminum Sign
(Item PS62, PSD109, PS74 or similar)
B. 1 Dispenser Box (Item PAWBOX)
C. 1 8-ft Steel Sign Post (Item SP8)
D. 2 Mounting Hardware Sets— each set
includes 2 nuts, bolts and washers
(Item SSH103)
E80 Pet Waste Bags (Item PAWBAG)
Optional Tools Needed:
• Socket Driver or Adjustable Wrench
• Level
• Post Hole Driver
E
D

2. Station Assembly
1. Pole Installation
Using a post hole driver (not included), drive the sign post (C) approximately 15-18” into
the ground. Make sure that the “hollow” or “recessed” side of the post is facing where
you want the front of the unit to face. Use a level (not included) to ensure the pole is
standing upright and will properly support the unit. Adjust if necessary.
Need Help? Give us a call! Great American •1-800-231-0329 •www.gabpproperty.com
3. Station Preparation
18”
1. Using the first hardware set (D), secure the sign (A) to the top of the steel post (C) with
a bolt and washer at the top of the sign and another at the bottom. The washers should
be next to the printed side (front) of the sign and the nuts are secured on the outside/
back of the post. To ensure the best outcome, make sure the sign is flush with the top of
the pole.
2. Using the second hardware set (D), attach the dispenser box (B) directly under the
sign leaving about 1” in-between. Open the box, align the holes to the steel post and
attach with the two bolts. The washers should be used on the inside of the box with the
nuts secured to the outside/back of the post.
Open the dispenser box and insert up to 10 header cards of bags (E) onto the prongs in-
side the dispenser. Close the station, pull the top bag through the hole and you’re all set!
Note: This dispenser fits all types of bags. If you are using boxed bags (Item PAWBAG3), you will
need to slip a converter (Great American Item PAW22) onto the prongs inside the dispenser and
insert the boxes into the converter.
Please contact us immediately if you have any missing or damaged items
or need any additional assistance. Thank you.