Gree AMBER GWH24YE-K6DNA1A/I User manual

SERVICE MANUAL
[ AMBER SERIES ]
GWH24YE-K6DNA1A set
(GWH24YE-K6DNA1A/I + GWH24YE-K6DNA1A/O)
EN ORIGINAL INSTRUCTIONS, VER. 02 13-05-2020
CB437001401 set
(CB437N01401 + CB437W01401)

IMPORTANT NOTE:
Read this manual carefully before installing or operating your new air conditioning unit.
Make sure to save this manual for future reference.

1
Service Manual
Technical Information
1. Summary
Part Ⅰ: Technical Information
Indoor Unit
GWH24YE-K6DNA1A/I
GWH24YE-K6DNA2A/I
GWH24YE-K6DNA2A/I
（CB466N01402 CB466N01403 ）
Remote Controller
YAG1FB2(WiFi)
Outdoor Unit
GWH24YE-K6DNA1A/O
GWH24YE-K6DNA1A CB437001400
GWH24YE-K6DNA1A/O CB437W01400
YAG1FB2(WiFi)
GWH24YE-K6DNA2A CB466001400
GWH24YE-K6DNA2A CB466001403
GWH24YE-K6DNA1A CB437001401
GWH24YE-K6DNA1A/O CB437W01401GWH24YE-K6DNA2A CB466001401
GWH24YE-K6DNA2A CB466001402

2
Service Manual
Technical Information
2. Specications
2.1 Specication Sheet
Parameter Unit Value
Model GWH24YE-K6DNA1A
GWH24YE-K6DNA2A
Product Code CB437001401
CB466001401 CB466001402 CB466001403
Power
Supply
Rated Voltage V ～220-240
Rated Frequency Hz 50
Phases 1
Power Supply Mode Outdoor
Cooling Capacity W 7000
Heating Capacity W 7200
Cooling Power Input W 2000
Heating Power Input W 1845
Cooling Current Input A 9.15
Heating Current Input A 8.44
Rated Input W 3800
Rated Current A 16.42
Air Flow Volume(SH/H/MH/M/ML/L/SL) m3/h 1250/1100/1000/950/900/850/750
Dehumidifying Volume L/h 2.4
EER W/W 3.5
COP W/W 3.9
SEER W/W 7
HSPF W/W /
Application Area m227-42
Indoor
Unit
Indoor Unit Model GWH24YE-K6DNA1A/I
GWH24YE-K6DNA1A/I
Indoor Unit Product Code CB437N01401
CB437N01400 CB466N01402 CB466N01403
Fan Type Cross-ow
Fan Diameter Length(DXL) mm Φ108X830
Cooling Speed(SH/H/MH/M/ML/L/
SL) r/min 1250/1100/1000/950/900/850/800/600
Heating Speed(SH/H/MH/M/ML/L/
SL) r/min 1400/1250/1100/1050/1000/900/850
Fan Motor Power Output W 50
Fan Motor RLA A 0.35
Fan Motor Capacitor μF /
Evaporator Form Aluminum Fin-copper Tube
Evaporator Pipe Diameter mm Ф7
Evaporator Row-n Gap mm 1.5
Evaporator Coil Length (LXDXW) mm 850X25.4X342.9
Swing Motor Model MP35CP/MP24HF
Swing Motor Power Output W 2.5/1.5
Fuse Current A 3.15
Sound Pressure Level(SH/H/MH/M/
ML/L/SL) dB (A) 49/47/44/42/40/38/36
Sound Power Level(SH/H/MH/M/
ML/L/SL) dB (A) 65/61/58/56/54/52/50
Dimension (WXHXD) mm 1101X327X249
Dimension of Carton Box (LXWXH) mm 1164X402X339
Dimension of Package(LXWXH) mm 1167X405X354
Net Weight kg 16.5
Gross Weight kg 20

3
Service Manual
Technical Information
The above data is subject to change without notice. Please refer to the nameplate of the unit.
Outdoor
Unit
Outdoor Unit Model GWH24YE-K6DNA1A/O
Outdoor Unit Product Code CB437W01401
Compressor Manufacturer ZHUHAI LANDA COMPRESSOR CO,LTD.
Compressor Model QXFS-D23ZX090A
Compressor Oil FW68DA
Compressor Type Rotary
Compressor LRA. A 25
Compressor RLA A 11.5
Compressor Power Input W 2550
Compressor Overload Protector 1NT11L-6233/HPC 115/95 /KSD115ºC
Throttling Method Electron expansion valve
Set Temperature Range ºC 16~30
Cooling Operation Ambient Temperature
Range ºC -15~54
Heating Operation Ambient Temperature
Range ºC -22~24
Condenser Form Aluminum Fin-copper Tube
Condenser Pipe Diameter mm Ф7
Condenser Rows-n Gap mm 2-1.4
Condenser Coil Length (LXDXW) mm 935X38.1X660
Fan Motor Speed rpm 800
Fan Motor Power Output W 60
Fan Motor RLA A 0.58
Fan Motor Capacitor μF /
Outdoor Unit Air Flow Volume m3/h 3200
Fan Type Axial-ow
Fan Diameter mm Ф520
Defrosting Method Automatic Defrosting
Climate Type T1
Isolation I
Moisture Protection IPX4
Permissible Excessive Operating Pressure
for the Discharge Side MPa 4.3
Permissible Excessive Operating Pressure
for the Suction Side MPa 2.5
Sound Pressure Level (H/M/L) dB (A) 60/-/-
Sound Power Level (H/M/L) dB (A) 70/-/-
Dimension(WXHXD) mm 965X700X396
Dimension of Carton Box (LXWXH) mm 1026X455X735
Dimension of Package(LXWXH) mm 1029X458X750
Net Weight kg 53
Gross Weight kg 57.5
Refrigerant R32
Refrigerant Charge kg 1.7
Connection
Pipe
Connection Pipe Length m 5
Connection Pipe Gas Additional Charge g/m 50
Outer Diameter Liquid Pipe mm Ф6
Outer Diameter Gas Pipe mm Ф16
Max Distance Height m 10
Max Distance Length m 25
Note: The connection pipe applies metric diameter.

4
Service Manual
Technical Information
Parameter Unit Value
Model GWH24YE-K6DNA1A
GWH24YE-K6DNA2A
Product Code CB437001400
CB466001400
Power
Supply
Rated Voltage V ～220-240
Rated Frequency Hz 50
Phases 1
Power Supply Mode Outdoor
Cooling Capacity W 7000
Heating Capacity W 7200
Cooling Power Input W 2000
Heating Power Input W 1845
Cooling Current Input A 9.15
Heating Current Input A 8.44
Rated Input W 3800
Rated Current A 16.42
Air Flow Volume(SH/H/MH/M/ML/L/SL) m3/h 1250/1100/1000/950/900/850/750
Dehumidifying Volume L/h 2.4
EER W/W 3.5
COP W/W 3.9
SEER W/W 7
HSPF W/W /
Application Area m227-42
Indoor
Unit
Indoor Unit Model GWH24YE-K6DNA1A/I
GWH24YE-K6DNA2A/I
Indoor Unit Product Code CB437N01400
CB466N01400
Fan Type Cross-ow
Fan Diameter Length(DXL) mm Φ108X830
Cooling Speed(SH/H/MH/M/ML/L/
SL) r/min 1250/1100/1000/950/900/850/800/600
Heating Speed(SH/H/MH/M/ML/L/
SL) r/min 1400/1250/1100/1050/1000/900/850
Fan Motor Power Output W 50
Fan Motor RLA A 0.35
Fan Motor Capacitor μF /
Evaporator Form Aluminum Fin-copper Tube
Evaporator Pipe Diameter mm Ф7
Evaporator Row-n Gap mm 1.5
Evaporator Coil Length (LXDXW) mm 850X25.4X342.9
Swing Motor Model MP35CP/MP24HF
Swing Motor Power Output W 2.5/1.5
Fuse Current A 3.15
Sound Pressure Level(SH/H/MH/M/
ML/L/SL) dB (A) 49/47/44/42/40/38/36
Sound Power Level(SH/H/MH/M/
ML/L/SL) dB (A) 65/61/58/56/54/52/50
Dimension (WXHXD) mm 1101X327X249
Dimension of Carton Box (LXWXH) mm 1164X402X339
Dimension of Package(LXWXH) mm 1167X405X354
Net Weight kg 16.5
Gross Weight kg 20

5
Service Manual
Technical Information
The above data is subject to change without notice. Please refer to the nameplate of the unit.
Outdoor
Unit
Outdoor Unit Model GWH24YE-K6DNA1A/O
Outdoor Unit Product Code CB437W01400
Compressor Manufacturer ZHUHAI LANDA COMPRESSOR CO,LTD.
Compressor Model QXFS-D23ZX090A
Compressor Oil FW68DA
Compressor Type Rotary
Compressor LRA. A 25
Compressor RLA A 11.5
Compressor Power Input W 2550
Compressor Overload Protector 1NT11L-6233/HPC 115/95 /KSD115ºC
Throttling Method Electron expansion valve
Set Temperature Range ºC 16~30
Cooling Operation Ambient Temperature
Range ºC -15~54
Heating Operation Ambient Temperature
Range ºC -22~24
Condenser Form Aluminum Fin-copper Tube
Condenser Pipe Diameter mm Ф7
Condenser Rows-n Gap mm 2-1.4
Condenser Coil Length (LXDXW) mm 935X38.1X660
Fan Motor Speed rpm 800
Fan Motor Power Output W 60
Fan Motor RLA A 0.58
Fan Motor Capacitor μF /
Outdoor Unit Air Flow Volume m3/h 3200
Fan Type Axial-ow
Fan Diameter mm Ф520
Defrosting Method Automatic Defrosting
Climate Type T1
Isolation I
Moisture Protection IPX4
Permissible Excessive Operating Pressure
for the Discharge Side MPa 4.3
Permissible Excessive Operating Pressure
for the Suction Side MPa 2.5
Sound Pressure Level (H/M/L) dB (A) 60/-/-
Sound Power Level (H/M/L) dB (A) 70/-/-
Dimension(WXHXD) mm 965X700X396
Dimension of Carton Box (LXWXH) mm 1026X455X735
Dimension of Package(LXWXH) mm 1029X458X750
Net Weight kg 53
Gross Weight kg 57.5
Refrigerant R32
Refrigerant Charge kg 1.7
Connection
Pipe
Connection Pipe Length m 5
Connection Pipe Gas Additional Charge g/m 50
Outer Diameter Liquid Pipe mm Ф6
Outer Diameter Gas Pipe mm Ф16
Max Distance Height m 10
Max Distance Length m 25
Note: The connection pipe applies metric diameter.

6
Service Manual
Technical Information
2.2 Operation Characteristic Curve
2.3 Capacity Variation Ratio According to Temperature
01020304050607090010 20 30 40 50 60 70 80 90 100
120
110
80
11
10
9
8
7
6
5
4
3
2
1
0
Compressor speed (rps)
11
10
9
8
7
6
5
4
3
2
1
0
Compressor speed (rps)
220V
230V
240V
220V
230V
240V
Conditions
Indoor: DB27°C/WB19°C
Outdoor: DB35°C/WB24°C
Indoor air flow: High
Pipe length: 5m
Conditions
Indoor: DB20°C/WB15°C
Outdoor: DB7°C/WB6°C
Indoor air flow: High
Pipe length: 5m
Cooling Heating
30
40
50
60
70
80
90
100
110
120
10
-5 057-10-15-22
Outdoor temp.(oC)
Capacity ratio(%)
Conditions
Indoor:DB20°C/WB15°C
Indoor air flow:Super High
Pipe length: 5m
Heating
Heating operation ambient temperature range is -22°C~24°C
Cooling
Outdoor temp.( )
)%(oitaryticapaC
32 33 34 35 36 37 38 39 53 54
50 51 52
100
105
95
90
85
80
75
70
65
60
55
50
Conditions
Indoor:DB27°C/WB19°C
Indoor air flow:Super High
Pipe length:5m
°C

7
Service Manual
Technical Information
2.4 Cooling and Heating Data Sheet in Rated Frequency
Rated cooling
condition(°C)
(DB/WB) Model
Pressure of gas pipe
connecting indoor and
outdoor unit
Inlet and outlet pipe
temperature of heat
exchanger
Fan speed of
indoor unit
Fan speed of
outdoor unit
Compressor
frequency
(Hz)
Indoor Outdoor P (MPa) T1 (°C) T2 (°C)
27/19 35/24 24K 0.9 to 1.1 12 to 14 75 to 37 Super High High 72
Rated heating
condition(°C)
(DB/WB) Model
Pressure of gas pipe
connecting indoor and
outdoor unit
Inlet and outlet pipe
temperature of heat
exchanger
Fan speed of
indoor unit
Fan speed of
outdoor unit
Compressor
frequency
(Hz)
Indoor Outdoor P (MPa) T1 (°C) T2 (°C)
20/- 7/6 24K 2.8 to 3.0 70 to 35 2 to 4 Super High High 77
Instruction:
T1: Inlet and outlet pipe temperature of evaporator
T2: Inlet and outlet pipe temperature of condenser
P: Pressure at the side of big valve
Connection pipe length: 5m.
Cooling:
Heating:
2.5 Noise Curve
Indoor side noise when blowing Outdoor side noise when blowing
Indoor fan motor rotating speed
Compressor frequency(Hz)
Noise/dB(A)
50
60
30
40
20
Low Middle High Super High
24K
40
42
44
46
48
50
52
54
56
20 4030 50 60 70 80
90
Noise dB(A)
Cooling
Heating

8
Service Manual
Technical Information
3. Outline Dimension Diagram
3.1 Indoor Unit
79
154
43
216 685 200
Φ70 Φ70
43
117 685 194
140
190
38
Φ55 Φ55
38
79
154
43
216 685 200
Φ70 Φ70
43
117 685 194
140
190
38
Φ55 Φ55
38
Unit:mm
W D
H
Models W H D
24K 1101 327 249

9
Service Manual
Technical Information
3.2 Outdoor Unit
965
892
700
396
560
341
396
Unit:mm

15
Service Manual
Technical Information
6. Function and Control
6.1 Remote Controller Introduction
Buttons on Remote Controller
Introduction
for Icons on Display Screen
Introduction for Buttons on Remote Controller
Note:
●
After putting through the power, the air conditioner will give out a sound.Operation indic
●
This is a general use remote controller, it could be used for the air conditioners with multifunction; For some function, which the model
don't have, if press the corresponding button on the remote controller that the unit will keep the original running status
.
ator " " is ON (red indicator). After that, you can
operate the air conditioner by using remote controlle
r.
● Under on status, pressing the button on the remote controller
, the signal icon " " on the display of remote controller will blink once and
the air conditioner will give out a “de” sound, which means the signal has been sent to the air conditione
r.
● Under of
f status, set temperature and clock icon will be displayed on the display of remote controller (If timer on, timer off and light
functions are set, the corresponding icons will be displayed on the display of remote controller at the same time); Under on st
atus, the
display will show the corresponding set function icons.
1. ON/OFF button
Press this button to turn on the unit. Press this button again to turn off the unit
.
1
2
3
4
5
6
7
8
9
10
11
12
button
button
WiFi button
QUIET button
SLEEP button
TEMP button
I FEEL button
13
14
15
16
TURBO button
LIGHT button
button
TIMER ON/
TIMER OFF button
CLOCK button
ON/OFF button
FAN button
+/- button
MODE button
(after opening cover
/
1
15
5
2
6
3
12
16
4
11
8
9
13
7
10
14
WiFi
1
2
3
4
ON/OFF button
FAN button
+/- button
MODE button
3
4
2
1
(before opening cover
Send signal
Turbo mode
8ć heating function
Set temperature
Set time
X-FAN function
TIMER ON /TIMER OFF
Child lock
Up & down swing
Left & right swing
Set fan speed
Light
Temp. display type
: Set temp.
: Outdoor ambient temp.
: Indoor ambient temp.
Sleep mode
Clock
Heat mode
Fan mode
Dry mode
Cool mode
Auto mode
Operation mode
I feel
Healthy mode
Scavenging functions
Quiet
This is a general remote controller. Some
models have this function while some do
not. Please refer to the actual models.

16
Service Manual
Technical Information
2. FAN button
Press this button, Auto, Low, Medium-low, Medium, Medium-high, High speed can be circularly selected. After powered on, Auto fan speed
●X-FAN function：Hold fan speed button for 2s in COOL or DRY mode, the icon “ ” is displayed and the indoor fan will continue operation
for a few minutes in order to dry the indoor unit even though you have turned off the unit. After energization, X-FAN OFF is defaulted.
X-FAN is not available in AUTO, FAN or HEAT mode.
●This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is stopped to avoid mould.
●Having set X-FAN function on: After turning off the unit by pressing ON/OFF button indoor fan will continue running for a few minutes.
at low speed. In this period, Hold fan speed button for 2s to stop indoor fan directly.
●Having set X-FAN function off: After turning off the unit by pressing ON/OFF button, the complete unit will be off directly.
is default. Under DRY mode, Low fan speed only can be set up.
3. MODE button
Press this button, Auto, Cool, Dry, Fan, Heat mode can be selected circularly. Auto mode is default while power on. Under Auto mode, the
temperature will not be displayed;Under Heat mode, the initial value is 28°C( 82°F);Under other modes, the initial value is 25°C(77°F).
4. +/- button
● Press " + " or " - " button once increase or decrease set temperature 1°C(°F). Holding " + " or " - " button, set temperature on remote
controller will change quickly. On releasing button after setting is finished, temperature indicator on indoor unit will change accordingly.
When setting TIMER ON, TIMER OFF or CLOCK, press " + " or " - " button to adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF
buttons) When setting TIMER ON, TIMER OFF or CLOCK, press " + " or " - " button to adjust time. (Refer to CLOCK, TIMER ON,
TIMER OFF buttons)
5. TURBO button
Under Cool or Heat mode,press this button can turn on or turn off the Turbo function.After the Turbo function turned on, the signal of Turbo
will display. The signal will be automatically cancelled if changing the mode or fan speed.
6. button
Press this button to set left & right swing angle cycling as below:
7. button
Press this button to set swing angle,which circularly changes as below:
This remote controller is universal. If it receives threes kinds of following status,the swing angle will remain origial.
If guide louver is stopped when it is swinging up and down,it will remain its present position.
8. CLOCK button
Press this button, the clock can be set up,signal blink and display.Within 5 seconds, the value can be adjusted by pressing + or - button,
if continuously press this button for 2 seconds above,in every 0.5 seconds, the value on ten place of Minute will be increased 1.During
After
powered on, 12:00 is defaulted to display and signal will be displayed. If there is signal be displayed that denotes the current time
value is Clock value, otherwise is Timer value.
9. TIMER ON/TIMER OFF button
● Timer On setting: Signal “ON”will blink and display,signal will conceal,the numerical section will become the timer on setting status.
During 5 seconds blink,by pressing + or - button to adjust the time value of numerical section,every press of that button,the value will be
increased or decreased 1 minute.Hold pressing + or - button,2 seconds later,it quickly change,the way of change is: During the initial 2.5
seconds,ten numbers change in the one place of minute,then the one place is constant,ten numbers change in the ten splace of minute at
2.5 seconds speed and carry. During 5s blink,press the Timer button,the timer setting succeeds.The Timer On has been set up,repress the
timer button,theTimer On will be canceled. Before setting theTimer,please adjust the Clock to the current actual time.
● One press this key to enter into TIMER OFF setup, in which case the TIMER OFF icon will blink. The method of setting is the sameas for
Note:
●It’s Low fan speed under Dry mode.
(only for cooling and heating unit.
As for cooling only unit, it won’t
have any action when it receives
the signal of heating operation.)
Medium fanLow fan High fan
Medium-low fan Medium-high fan
ATUO
AUTO COOL DRYFAN HEAT
OFF
OFF
TIMER ON.

17
Service Manual
Technical Information
10. TEMP button
11. / button(This function is only available for some models)
scavenging function;LCD displays“ ”.Press the button for the second time to start healthy and scavenging functions simultaneously;LCD
displays“ ”and “ ” .Press this button for the third time to quit healthy and scavenging functions simultaneously.Press the button for the
fourth time to start healthy function; LCD display“ ” .Press this button again to repeat the operation above.
NOTE: This function is applicable to partial of models.
12. I FEEL button
button, every 200ms to send I FEEL once, after this function started,the remote control will send temperature to the main un it in every 10
minutes.When repress this button, this function will be turned off.
13. LIGHT button
Press this button at unit On or Off status,Light On and Light Off can be set up.After powered on, Light On is defaulted.
14. WiFi button
Press " WiFi " button to turn on or turn off WiFi function. When WiFi function is turned on, the " WiFi " icon will be displayed on remote controller;
Under status of remote controller off, press "MODE" and " WiFi " buttons simultaneously for 1s, WiFi module will restore to factory default setting.
● This function is only available for some models.
15. QUIET button
Press this button,the Quiet status is under the Auto Quiet mode (display" " and “Auto”signal ) and Quiet mode(display " " singal) and
Quiet OFF(there is no signal of " " displayed),after powered on,the Quiet OFF is defaulted. Under the Quiet mode (Display " "signal),
the fan speed is not available.
16. SLEEP button
●Press this button, can select Sleep 1 ( ), Sleep 2 ( ),Sleep 3 ( ) and cancel the Sleep, circulate between these, after
●Sleep 1 is Sleep mode 1, in Cool, Dehumidify modes: sleep status after run for one hour, the main unit setting temperature will increase 1°C,
2 hours,setting temperature increased 2°C, the unit will run at this setting temperature; In Heat mode: sleep status after run for one hour,
the setting temperature will decrease 1°C, 2 hours, setting temperature will decrease 2°C, then the unit will run at this setting temperature.
●Sleep 2 is sleep mode 2, that is air conditioner will run according to the presetting a group of sleep temperature curve.
In Cool mode:
(1) When setting the initial temperature 16~23°C, after turned on Sleep function, the temperature will be increased 1°C in every hour,after
3°C the temperature will be maintained, after 7hours,the temperature will be decreased 1°C, after that the unit will keep on running under
this temperature;
(2) When setting the initial temperature 24~27°C, after turned on Sleep function, the temperature will be increased 1°C in every hour,after
2°C the temperature will be maintained, after 7hours,the temperature will be decreased 1°C, after that the unit will keep on running under
this temperature;
(3) When setting the initial temperature 28~29°C, after turned on Sleep function, the temperature will be increased 1°C in every hour, after
1°C the temperature will be maintained, after 7hours,the temperature will be decreased 1°C, after that the unit will keep on running under
this temperature;
(4) When setting the initial temperature 30°C, under this temperature setting, after 7hours, the temperature will be decreased 1°C, after
that the unit will keep on running under this temperature;
In Heat mode:
(1) Under the initial presetting temperature 16°C, it will run under this setting temperature all along.
(2) Under the initial presetting temperature17~20°C, after Sleep function started up, the temperature will decrease 1°C in every hour, after
1°C decreased, this temperature will be maintained.
(3) Under the initial presetting temperature 21~27°C, after Sleep function started up, the temperature will decrease 1°C in every hour,after
2°C decreased, this temperature will be maintained.
(4) Under the initial presetting temperature 28~30°C, after Sleep function started up, the temperature will decrease 1°C in every hour, after
3°C decreased, this temperature will be maintained
return to the setting temprature or it depends on the other received signal within 3s.
Attention: When displaying the outdoor ambient, the displaying range is 0-60℃ When it goes beyond the range, it keeps the
threshold data (the smallest—0℃and the largest 60℃).
Warm tips: When operating buttons on the cover please make sure the cover isclosed completely.
Note:Outdoor temperature display is not available for some models. At that time, indoor unit receives " " signal, while it
displays indoor set temperature.
Press this button, you can see indoor set temperature, indoor ambient temperature or outdoor ambient temperature on indoor unit’s
display. The setting on remote controller is selected circularly as below:
When selecting " " with remote controller or no display, temperature indicator on indoor unit displays set temperature;
When selecting " " with remote controller, temperature indicator on indoor unit displays indoor ambient temperature; When
selecting " " with remote controller, temperature indicator on indoor unit displays outdoor ambient temperature. 3s later it will
no display
When I FEEL function is turned on, the remote controller should be put within the area where indoor unit can receive the signal
sent by the remote controller.

18
Service Manual
Technical Information
the place of setting temperature "88" will display the corresponding temperature of last setting sleep curve and blink
;
control will resume the original timer display;temperature display will resume to original setting temperature.
●Sleep3- the sleep curve setting under Sleep mode by DI
Y could be inquired:
The user could accord to sleep curve setting method to inquire the presetting sleep curve, enter into user individuation sleep
setting status,
Note: In the above presetting or enquiry procedure, if continuously within10s, there is no button pressed, the sleep curve setting status will
be automatically quit and resume to display the original displaying. In the presetting or enquiry procedure, press "ON/OFF" bu
t
ton, "Mode"
button, "T
imer" button or "Sleep" button, the sleep curve setting or enquiry status will quit similarly.
17.
About AUTO RUN
When
AUTO RUN mode is selected, the setting temperature will not be displayed on the LCD, the unit will be in accordance with the room
temp. automatically to select the suitable running method and to make ambient comfortable
.
18.
About turbo function
If start this function, the unit will run at super-high fan speed to cool or heat quickly so that the ambient temp. approachs
the preset temp.
as soon as possible.
19.
About lock
Press + and - buttons simultaneously to lock or unlock the keyboard. If the remote controlleris locked, the icon will be
d
isplayed on it, in
.
20.
About swing up and down
(1)Press swing up and down button continuously more than 2s,the main unit will swing back and forth from up to down, and then
loosen
the button, the unit will stop swinging and present position of guide louver will be kept immediatel
y.
(2)Under swing up and down mode, when the status is switched from of
f to , if press this button again 2s later, status will switch to off
status directly; if press this button again within 2s,the change of swing status will also depend on the circulation sequence
stated above.
21.
About swing left and right
(1)Press swing left and right button continuously more than 2s,the main unit will swing back and forth from left to right, and
then loosen the
button, the unit will stop swinging and present position of guide louver will be kept immediatel
y.
(2) Under swing left and right mode, when the status is switched from of
f to , if press this button again 2s later,
status will switch to
of
f status directly; if press this button again within 2s,the change of swing status will also depend on the circulation sequen
ce stated above.
22.
About switch between Fahrenheit and Centigrade
Under status of unit of
f, press MODE and - buttons simultaneously to switch °C and °F.
23. Combination of " TEMP" and "CLOCK" buttons :
About Energy-saving Function
Press “TEMP” and “CLOCK” simultaneously in COOL
mode to start energy-saving function.Nixie tube on the remote controller displa
ys “SE”.
Repeat the operation to quit the function.
24. Combination of " TEMP" and "CLOCK" buttons :
About 8°C Heating Function(This function is only available for some models)
Press “TEMP” and “CLOCK” simultaneously in HE
AT mode to start 8°C Heating Function.Nixie tube on the remote controller displays"
"and a selected temperature of “8°C” (46°F if Fahrenheit is adopted). Repeat the operation to quit the function
.
25.
About Auto Quiet function
When auto quiet function is selected:
(1)Under cooling mode: indoor fan operates at notch 4 speed. 10 minutes later or when indoor ambient temperature≤28°C, indoor
fan will
operate at notch 2 speed or quiet mode according to the comparison between indoor ambinet temperature and set temperature.
(2)Under heating mode: indoor fan operates at notch 3 speed or quiet mode according to the comparison between indoor ambient
temperature and set temperature.
(3)Under dr
y, fan mode: indoor fan operates at quiet mode.
(4)Under auto mode: the indoor fan operates at the auto quiet mode according to actual cooling, heating or fan mode
.
26.
About Sleep function
27.
WIFI Function
WIFI
Under the Fan and
Auto mode, the Sleep function cannot be set up, under Dehumidify mode, only Sleep 1 can be selected.Select and
enter into any kind of Sleep mode, the Quiet function will be attached and stared, di
f
Press "MODE" and "TURBO" button simultaneously to turn on or turn off WIFI function. When WIFI function is turned on, the "
" icon
will be displayed on remote controller; Long press "MODE" and "TURBO" buttons simultaneously for 10s, remote controller will se
nd WIFI
reset code and then the WIFI function will be turned on. WIFI function is defaulted ON after energization of the remote contro
ller.(This
function only applicable for some models.)
ferent Quiet status could be optional and turned off.
●Sleep 3- the sleep curve setting under Sleep mode by DIY:
(1) Under Sleep 3 mode, press "T
urbo" button for a long time, remote control enters into user individuation sleep setting statu
s, at this time,
the time of remote control will display "1hour ", the setting temperature "88" will display the corresponding temperature of last setting sleep
(3)
At this time, 1hour will be automatically increased at the timer postion on the remote control, (that are "2hours" or "3hou
rs" or "8hours "),

19
Service Manual
Technical Information
WiFi
WiFi
Operation Guide
Replacement of Batteries in Remote Controller
1. General operation
(1)After powered on, press ON/OFF button, the unit will start to run. (Note: When it is powered on, the
guide louver of main unit will close automaticall
y.)
(2)Press MODE button, select desired running mode.
(3)Pressing + or - button, to set the desired temperature (It is unnecessary to set the temp. at
AUTO
mode.)
(4)Pressing F
AN button, set fan speed, can select AUTO FAN,LOW, MEDIUM-LOW, MEDIUM, MEDIUM-
HIGH and HIGH.
2. Optional operation
(1)Press SLEE
P button, to set sleep.
(2)Press
TIMER ON and TIMER OFF button, can set the scheduled timer on or timer off.
(3)Press LIGH
T button, to control the on and off of the displaying part of the unit (This function may be not
available for some units).
(4)Press
TURBO button, can realize the ON and OFF of TURBO function.
cover of battery box along the arrow direction.
2. Replace two 7# (AAA 1.5V) dry batteries, and make sure the position of "+" polar and "-" polar are
correct.
3. Reinstall the cover of battery box.
Note:
● During operation, point the remote control signal sender at the receiving window on indoor unit.
● The distance between signal sender and receiving window should be no more than 8m, and there
should be no obstacles between them.
remote controller should be close to indoor unit during operation.
● Replace new batteries of the same model when replacement is required.
● When you don’t use remote controller for a long time, please take out the batteries.
● If the display on remote controller is fuzzy or there’s no display, please replace batteries.
5
1
2
3
4
(5)
Pressing and button, to select the swing.
battery
Cover of battery box
remove
reinstall
1
2
3
4

20
Service Manual
Technical Information
6.2 GREE+ App Operation Manual
Control Flow Chart
Download and installation
Operating Systems
Requirement for User's smart phone:
Scan the QR code or search "GREE+" in the application market to download and install it. When "GREE+" App is installed, register the
account and add the device to achieve long-distance control and LAN control of Gree smart home appliances.
For more information, please refer to "Help" in App.
Internet
Cellular/
Other Wi-FI
Home Wi-Fi
Home wireless router
Home Wi-Fi
Gree
Gree Cloud
GREE+ APP
intelligent
home
appliances
iOS system
Support iOS7.0 and
above version
Android system
Support Android 4.4
and
above version
GREE+ App Download Linkage

21
Service Manual
Technical Information
Control Flow Chart
Download and installation
Operating Systems
Requirement for User's smart phone:
Scan the QR code or search "Ewpe Smart" in the application market to download and install it. When "Ewpe Smart" App is installed,
register the account and add the device to achieve long-distance control and LAN control of smart home appliances.
For more information, please refer to "Help" in App.
6.3 Ewpe Smart App Operation Manual
iOS system
Support iOS7.0 and
above version
Android system
Support Android 4.4
and
above version
App Download Linkage
Internet
Cellular/
Other Wi-FI
Home Wi-Fi
Home wireless router
Home Wi-Fi
Cloud
APP
intelligent
home
appliances

22
Service Manual
Technical Information
6.4 Brief Description of Modes and Functions
1. Basic function of system
(1) Cooling mode
(1) Under this mode, fan and swing operates at setting status. Temperature setting range is 16~30OC.
(2) During malfunction of outdoor unit or the unit is stopped because of protection, indoor unit keeps original operation status.
(2) Drying mode
(1) Under this mode, fan operates at low speed and swing operates at setting status. Temperature setting range is 16~30OC.
(2) During malfunction of outdoor unit or the unit is stopped because of protection, indoor unit keeps original operation status.
(3) Protection status is same as that under cooling mode.
(4) Sleep function is not available for drying mode.
(3) Heating mode
(1) Under this mode, Temperature setting range is 16~30OC.
(2) Working condition and process for heating mode:
When turn on the unit under heating mode, indoor unit enters into cold air prevention status. When the unit is stopped or at OFF status,
and indoor unit has been started up just now, the unit enters into residual heat-blowing status.
(4) Working method for AUTO mode:
1.Working condition and process for AUTO mode:
a.Under AUTO mode, standard heating Tpreset=20OC and standard cooling Tpreset=25OC. The unit will switch mode automatically
according to ambient temperature.
2.Protection function
a. During cooling operation, protection function is same as that under cooling mode.
b. During heating operation, protection function is same as that under heating mode.
3. Display: Set temperature is the set value under each condition. Ambient temperature is (Tamb.-Tcompensation) for heat pump unit
and Tamb. for cooling only unit.
4. If there’s I feel function, Tcompensation is 0. Others are same as above.
(5) Fan mode
Under this mode, indoor fan operates at set fan speed. Compressor, outdoor fan, 4-way valve and electric heating tube stop operation.
Indoor fan can select to operate at high, medium, low or auto fan speed. Temperature setting range is 16~30OC.
2. Other control
(1) Buzzer
Upon energization or availably operating the unit or remote controller, the buzzer will give out a beep.
(2) Auto button
If press this auto button when turning off the unit, the complete unit will operate at auto mode. Indoor fan operates at auto fan speed
and swing function is turned on. Press this auto button at ON status to turn off the unit.
(3) Auto fan
Heating mode: During auto heating mode or normal heating ode, auto fan speed will adjust the fan speed automatically according to
ambient temperature and set temperature.
(4) Sleep
After setting sleep function for a period of time, system will adjust set temperature automatically.
(5) Timer function:
General timer and clock timer functions are compatible by equipping remote controller with different functions.
(6) Memory function
memorize compensation temperature, off-peak energization value.
Memory content: mode, up&down swing, light, set temperature, set fan speed, general timer (clock timer can’t be memorized).
After power recovery, the unit will be turned on automatically according to memory content.
(7) Health function
During operation of indoor fan, set health function by remote controller. Turn off the unit will also turn off health function.
Turn on the unit by pressing auto button, and the health is defaulted ON.
●Indoor Unit

23
Service Manual
Technical Information
(8) I feel control mode
After controller received I feel control signal and ambient temperature sent by remote controller, controller will work according to the ambient
temperature sent by remote controller.
(9) Compulsory defrosting function
(1) Start up compulsory defrosting function
Under ON status, set heating mode with remote controller and adjust the temperature to 16℃. Press “+, -, +, -, +,-” button successively
within 5s and the complete unit will enter into compulsory defrosting status. Meanwhile, heating indicator on indoor unit will ON 10s and OFF
0.5s successively. (Note: If complete unit has malfunction or stops operation due to protection, compulsory defrosting function can be started
up after malfunction or protection is resumed.
(2) Exit compulsory defrosting mode
After compulsory defrosting is started up, the complete unit will exit defrosting operation according to the actual defrosting result, and the
complete unit will resume normal heating operation.
(10) Refrigerant recovery function:
(1) Enter refrigerant recycling function
Within 5min after energizing (unit ON or OFF status is ok), continuously press LIGHT button for 3 times within 3s to enter refrigerant
recycling mode; Fo is displayed and refrigerant recycling function is started. At this moment, the maintenance people closes liquid valve.
After 5min, stick the thimble of maintenance valve with a tool. If there is no refrigerant spraying out, close the gas valve immediately and
then turn off the unit to remove the connection pipe.
(2) Exit refrigerant recycling function
After entering refrigerant recycling mode, when receive any remote control signal or enter refrigerant recycling mode for 25min, the unit will
exit refrigerant recycling mode automatically If the unit is in standby mode before refrigerant recycling, it will be still in standby mode after
nishing refrigerant recycling; if the unit is in ON status before refrigerant recycling, it will still run in original operation mode.
(11) Ambient temperature display control mode
1. When user set the remote controller to display set temperature (corresponding remote control code: 01), current set temperature will be
displayed.
2. Only when remote control signal is switched to indoor ambient temperature display status (corresponding remote control code: 10) from
other display status (corresponding remote control code: 00, 01,11),controller will display indoor ambient temperature for 3s and then turn
back to display set temperature.
Under this mode, indoor fan operates at set fan speed. Compressor, outdoor fan, 4-way valve and electric heating tube stop operation.
Indoor fan can select to operate at high, medium, low or auto fan speed. Temperature setting range is 16~30OC.
(12) Off-peak energization function:
Adjust compressor’s minimum stop time. The original minimum stop time is 180s and then we change to:
The time interval between two start-ups of compressor can’t be less than 180+T s(0≤T≤15). T is the variable of controller. That’s to say
the minimum stop time of compressor is 180s~195s. Read-in T into memory chip when refurbish the memory chip each time. After power
recovery, compressor can only be started up after 180+T s at least.
(13) SE control mode
The unit operates at SE status.
(14) X-fan mode
When X-fan function is turned on, after turn off the unit, indoor fan will still operate at low speed for 2min and then the complete unit will be
turned off. When x-fan function is turned off, after turn off the unit, the complete unit will be turned off directly.
(15) 8º heating function
Under heating mode, you can set 8º heating function by remote controller. The system will operate at 8ºset temperature.
(16) Turbo function
This function can be set in cooling or heating mode, but not in auto, drying or fan mode. Press fan button to cancel this function.