Grizzly G1763 User manual

INSTRUCTION SHEET
MODEL G1763
TAILSTOCK
To install the Model G1763 Tailstock to your
milling table:
1. Secure the Model G1049 Rotary Table in the
vertical position on the milling table.
2. Install the tailstock onto the milling table so
the dead center of the tailstock is inline with
the center of the rotary table in both the X
and Y axes. Note—For added conveniece
slots are machined in both the tailstock and
the rotary table for keys (not supplied) to help
with the alignment of the centers as shown in
Figure 1-3.
Figure 2. Alignment of Z axis.
Figure 1. Alignment of Y axis.
NOTICE
It is extremely important to align centers in
the Y&Z axes. If axes are not properly
aligned, the depth, size, parallelism and
overall trueness will be compromised.
Model G1763 Tailstock
The Model G1763 Tailstock is designed for the
Model G1049 6" Rotary Table. This tailstock
allows the operator to support larger workpieces
while maintaining a high level of accuracy.
COPYRIGHT © DECEMBER 2003 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#5822 PRINTED IN TAIWAN

NOTICE
This instruction sheet is designed to give
instructions on the basic operations of this
equipment. However, it is in no way
comprehensive of all of the equipment
applications. WE STRONGLY RECOMMEND
that you read books, trade magazines, or
get formal training to maximize the potential
of your equipment.
Figure 3. Key placement.
Damage to your eyes, lungs, and ears could
result from failure to wear safety glasses, a
respirator and hearing protection while
using this equipment. Make sure proper
filter is worn while wearing respirator.
Figure 5. Adjustment hex bolts.
3. Align the dead center of the tailstock
vertically by loosening the hex bolts located
on the side of the tailstock. With a precision
level or indicator (depending on tolerance of
work being performed), make the dead
center parallel to the horizontal plane and on
center with the rotary table centers.
Figure 4. Indicating surface.
Loose hair and clothing
could get caught in
machinery and cause
serious personal injury.
Keep loose clothing
rolled up and long hair
tied up and away from
moving machinery.

107
106
102
103
112
101
111 110
109 104105108
REF PART # DESCRIPTION
101 P1763101 TAIILSTOCK BASE
102 P1763102 CENTER BASE
103 P1763103 TAIL CENTER
104 PSS05M SET SCREW M5-.8 X 10
105 PSS11M SET SCREW M6-1. X 16
106 P1763106 SET SCREW M12-1.75 X 45
107 P1763107 ADJUSTMENT NUT
108 PN02M HEX NUT M10-1.5
109 PSB84M CAP SCREW M10-1.5 X 35
110 PN02M HEX NUT M10-1.5
111 PW04M FLAT WASHER 10MM
112 PSB91M HEX BOLT M10-1.5 X 75
G1763 Tailstock Parts

Buy Direct and Save with Grizzly
®
– Trusted, Proven and a Great Value!
-OR-
•SECURE ORDERING
•ORDERS SHIPPED WITHIN 24 HOURS
•E-MAIL RESPONSE WITHIN ONE HOUR
Visit Our Website Today And Discover Why
Grizzly
®
Is The Industry Leader!
Call Today For A
FREE
Full Color Catalog