Inventory
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
Box Inventory: (Figure 1) Qty
A.
B.
C.
D.
E.
F.
Figure 1.
Hardware and Tools (not shown)
•
Setting/Replacing
Knives
Planer knives are extremely sharp and can
quickly cause a serious injury to your hands
or fingers. Always wear heavy leather gloves
when handling these knives to reduce the
risk of cutting injuries.
Note: If you need to replace or sharpen a knife,
you can remove the knife from the cutterhead dur-
ing Step 5 of the following procedure. Thoroughly
clean out any debris from the knife slots before
replacing the knives.
Replacement knives are available through Grizzly
(refer to Page 7for options).
Tools Needed Qty
To adjust the height of the knives:
1.
2.
Using dull or damaged knives increases
the risk of kickback and poor quality cut-
ting results. Only use sharp, undamaged
knives to prevent serious personal injury
and achieve high quality results.
