Grizzly G0495X User manual
MODEL G0495X
8" JOINTER
w/DIGITAL READOUT
OWNER'S MANUAL
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
4HISMANUALPROVIDESCRITICALSAFETYINSTRUCTIONSONTHEPROPERSETUP
OPERATIONMAINTENANCEANDSERVICEOFTHISMACHINEEQUIPMENT
&AILURETOREADUNDERSTANDANDFOLLOWTHEINSTRUCTIONSGIVENINTHIS
MANUALMAYRESULTINSERIOUSPERSONALINJURYINCLUDINGAMPUTATION
ELECTROCUTIONORDEATH
4HEOWNEROFTHISMACHINEEQUIPMENTISSOLELYRESPONSIBLEFORITS
SAFEUSE4HISRESPONSIBILITYINCLUDESBUTISNOTLIMITEDTOPROPER
INSTALLATIONINASAFEENVIRONMENTPERSONNELTRAININGANDUSAGE
AUTHORIZATIONPROPERINSPECTIONANDMAINTENANCEMANUALAVAILABILITY
ANDCOMPREHENSIONAPPLICATIONOFSAFETYDEVICESBLADECUTTERINTEG
RITYANDTHEUSAGEOFPERSONALPROTECTIVEEQUIPMENT
4HEMANUFACTURERWILLNOTBEHELDLIABLEFORINJURYORPROPERTYDAMAGE
FROMNEGLIGENCEIMPROPERTRAININGMACHINEMODIFICATIONSORMISUSE
3OMEDUSTCREATEDBYPOWERSANDINGSAWINGGRINDINGDRILLINGAND
OTHERCONSTRUCTIONACTIVITIESCONTAINSCHEMICALSKNOWNTOTHE3TATE
OF#ALIFORNIATOCAUSECANCERBIRTHDEFECTSOROTHERREPRODUCTIVE
HARM3OMEEXAMPLESOFTHESECHEMICALSARE
s ,EADFROMLEADBASEDPAINTS
s #RYSTALLINESILICAFROMBRICKSCEMENTANDOTHERMASONRYPRODUCTS
s !RSENICANDCHROMIUMFROMCHEMICALLYTREATEDLUMBER
9OURRISKFROMTHESEEXPOSURESVARIESDEPENDINGONHOWOFTENYOU
DOTHISTYPEOFWORK4OREDUCEYOUREXPOSURETOTHESECHEMICALS
7ORKINAWELLVENTILATEDAREAANDWORKWITHAPPROVEDSAFETYEQUIP
MENTSUCHASTHOSEDUSTMASKSTHATARESPECIALLYDESIGNEDTOFILTER
OUTMICROSCOPICPARTICLES
Table of Contents
INTRODUCTION............................................... 2
SECTION 1: SAFETY....................................... 7
SECTION 2: CIRCUIT REQUIREMENTS ...... 10
SECTION 3: SETUP ....................................... 11
SECTION 4: OPERATIONS ........................... 18
SECTION 5: ACCESSORIES......................... 29
SECTION 6: MAINTENANCE......................... 31
SECTION 7: SERVICE ................................... 32
WARRANTY AND RETURNS ........................ 53
INTRODUCTION
Foreword
www.grizzly.com
Functional Overview
Contact Info
The information contained herein is deemed accurate as of 5/13/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2Model G0495X
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G0495X 8" X 84" JOINTER WITH EXCLUSIVE
DIGITAL HEIGHT READOUT
Product Dimensions:
Weight.............................................................................................................................................................. 596 lbs.
Length/Width/Height....................................................................................................................... 83 x 24-1/2 x 44 in.
Foot Print (Length/Width)....................................................................................................................... 45-3/4 x 15 in.
Shipping Dimensions:
Type........................................................................................................................................................... Wood Crate
Content............................................................................................................................................................ Machine
Weight.............................................................................................................................................................. 750 lbs.
Length/Width/Height.................................................................................................................88-1/2 x 24-1/2 x 50 in.
Electrical:
Switch.......................................................................................................Magnetic with Thermal Overload Protection
Switch Voltage...................................................................................................................................................... 220V
Cord Length............................................................................................................................................................ 6 ft.
Cord Gauge....................................................................................................................................................12 guage
Recommended Breaker Size............................................................................................................................ 20 amp
Plug.......................................................................................................................................................................... No
Motors:
Main
Type......................................................................................................................tefc Capacitor Start Induction
Horsepower.................................................................................................................................................3 HP
Voltage........................................................................................................................................................220V
Prewired......................................................................................................................................................220V
Phase........................................................................................................................................................ Single
Amps.............................................................................................................................................................15A
Speed.................................................................................................................................................3450 RPM
Cycle..........................................................................................................................................................60 Hz
Number Of Speeds........................................................................................................................................... 1
Power Transfer ............................................................................................................................... V-Belt Drive
Bearings........................................................................................................Shielded and Permanently Sealed
Main Specifications:
Fence Information
Fence Length............................................................................................................................................. 38 in.
Fence Width........................................................................................................................................... 1-1/2 in.
Fence Height..........................................................................................................................................4-3/4 in.
Fence Stops........................................................................................................................ 45, 90 and 135 deg.
Cutting Capacities
Bevel Jointing...................................................................................................................... Left & Right 45 deg.
Maximum Width of Cut................................................................................................................................. 8 in.
Maximum Depth of Cut..............................................................................................................................1/8 in.
Maximum Rabbiting Depth........................................................................................................................ 1/2 in.
Number of Cuts Per Minute.......................................................................................................................28000
Machine Data Sheet
Cutterhead Info
8jiiZg]ZVY################################################################################################################################################################He^gVa
8jiiZg]ZVY9^VbZiZg################################################################################################################################################# (&$&+
CjbWZgd[8jiiZgHe^gVah#################################################################################################################################################)
CjbWZgd[>cYZmVWaZ8VgW^YZ8jiiZgh###########################################################################################################################(+
8jiiZg>chZgiIneZ############################################################################################################################################## >cYZmVWaZ
8VgW^YZ>chZgi9^bZch^dch#####################################################################################################################&*m&*m'#*bb
8jiiZg]ZVYHeZZY############################################################################################################################################,%%%GEB
Table Information
IdiVaIVWaZAZc\i]################################################################################################################################################### -'&$'
>c[ZZYIVWaZAZc\i]################################################################################################################################################## )'($-
Dji[ZZYIVWaZAZc\i]############################################################################################################################################## (.*$&+
IVWaZL^Yi]################################################################################################################################################################ -&$-
IVWaZI]^X`cZhh######################################################################################################################################################## (*$&+
;addgidIVWaZ=Z^\]i################################################################################################################################################### (&
IVWaZ6Y_jhibZciIneZ###############################################################################################################################EVgVaaZad\gVb
IVWaZBdkZbZciIneZ#####################################################################################################################################=VcYl]ZZa
Construction
7VhZ8dchigjXi^dcBViZg^Va################################################################################################################################ 8Vhi>gdc
7dYn6hhZbWan8dchigjXi^dcBViZg^Va############################################################################################################### 8Vhi>gdc
8VW^cZi8dchigjXi^dcBViZg^Va###################################################################################################################################HiZZa
;ZcXZ6hhZbWan8dchigjXi^dcBViZg^Va############################################################################################################## 8Vhi>gdc
<jVgY8dchigjXi^dcBViZg^Va#####################################################################################################################9^Z8VhiBZiVa
IVWaZ8dchigjXi^dcBViZg^Va################################################################################################## EgZX^h^dc<gdjcY8Vhi>gdc
EVgVaaZad\gVb##############################################################################################################################################################NZh
EV^ci#################################################################################################################################IdjX]"JeVcYEdlYZg8dViZY
Other Information
CjbWZgd[9jhiEdgih######################################################################################################################################################&
9jhiEdgiH^oZ############################################################################################################################################################### )
9^\^iVaGZVYdji7ViiZgn!666##########################################################################################################################################'
9^\^iVaHZchdg7ViiZgn!&#*KH^akZgDm^YZIneZ(*,$(%(#################################################################################################&
Other Specifications:
8djcignD[Dg^\^c############################################################################################################################################################## 8]^cV
LVggVcin########################################################################################################################################################################### &NZVg
HZg^VaCjbWZgAdXVi^dc################################################################################################################ >9AVWZadc;gdcid[8VW^cZi
6hhZbWanI^bZ######################################################################################################################################################### )*b^cjiZh
HdjcYGVi^c\#####################################################################################################################################################################-*YW
>HD;VXidgn################################################################################################################################################################# >HD.%%&
Features:
9^\^iVaGZVYdji[dg>c[ZZYIVWaZ=Z^\]i
EgZX^h^dc<gdjcY8Vhi>gdcIVWaZhVcY;ZcXZ
BV\cZi^XHl^iX]l^i]I]ZgbVaDkZgadVYEgdiZXi^dc
EVgVaaZad\gVbIVWaZ6Y_jhibZci
EZYZhiVaBdjciZYHl^iX]8dcigdah
=ZVkn"9jin8ZciZgBdjciZY;ZcXZ
GVX`VcYE^c^dc;ZcXZ6Y_jhibZci
)9jhiEdgi
Model G0495X Page 2 of 2
Figure 1.
A.
B.
C.
D.
E.
F.
G.
H.
Identification
I.
J.
K.
L.
M.
N.
O.
P.
Control Panel & Digital Sensor Features
Figure 2
A.
B.
C.
D.
E.
F.
G.
H.
Figure 3
I.
J.
K.
L.
M.
N.
O.
Safety Instructions for Machinery
!,7!93 53% (%!2).' 02/4%#4)/.
7(%./0%2!4).' -!#().%29
BVX]^cZgn cd^hZ XVc XVjhZ eZgbVcZci
]ZVg^c\adhh#
7%!2 02/0%2 !00!2%, 9D CDI
lZVgaddhZXadi]^c\!\adkZh!cZX`i^Zh!g^c\h!
dg_ZlZagni]Vi XVcXViX]^c bdk^c\eVgih#
LZVg egdiZXi^kZ ]V^g XdkZg^c\ id XdciV^c
adc\]V^gVcYlZVgcdc"ha^e[ddilZVg#
.%6%2 /0%2!4% -!#().%29 7(%.
4)2%$/25.$%24(%).&,5%.#%/&
$25'3/2!,#/(/,7ZbZciVaanVaZgi
ViVaai^bZhl]Zcgjcc^c\bVX]^cZgn#
2%!$4(%%.4)2%-!.5!,"%&/2%
34!24).'-!#().%29BVX]^cZgnegZh"
Zcih hZg^djh ^c_jgn ]VoVgYh id jcigV^cZY
jhZgh#
!,7!93 53% !.3) !002/6%$
3!&%49',!33%37(%./0%2!4).'
-!#().%29 :kZgnYVn ZnZ\aVhhZh dcan
]VkZ ^beVXi gZh^hiVci aZchZh·i]Zn VgZ
CDIhV[Zin\aVhhZh#
!,7!93 7%!2 ! .)/3( !002/6%$
2%30)2!4/2 7(%. /0%2!4).'
-!#().%29 4(!4 02/$5#%3 $534
BdhiineZhd[YjhilddY!bZiVa!ZiX#XVc
XVjhZhZkZgZgZhe^gVidgn^aacZhhZh#
&OR9OUR/WN3AFETY2EAD)NSTRUCTION
-ANUAL"EFORE/PERATINGTHIS-ACHINE
4HEPURPOSEOFSAFETYSYMBOLSISTOATTRACTYOURATTENTIONTOPOSSIBLEHAZARDOUSCONDITIONS4HIS
MANUALUSESASERIESOFSYMBOLSANDSIGNALWORDSINTENDEDTOCONVEYTHELEVELOFIMPORTANCE
OFTHESAFETYMESSAGES4HEPROGRESSIONOFSYMBOLSISDESCRIBEDBELOW2EMEMBERTHATSAFETY
MESSAGESBYTHEMSELVESDONOTELIMINATEDANGERANDARENOTASUBSTITUTEFORPROPERACCIDENT
PREVENTIONMEASURES
)NDICATESAPOTENTIALLYHAZARDOUSSITUATIONWHICHIFNOTAVOIDED
-!9RESULTINMINORORMODERATEINJURY)TMAYALSOBEUSEDTOALERT
AGAINSTUNSAFEPRACTICES
)NDICATESAPOTENTIALLYHAZARDOUSSITUATIONWHICHIFNOTAVOIDED
#/5,$RESULTINDEATHORSERIOUSINJURY
)NDICATESANIMMINENTLYHAZARDOUSSITUATIONWHICHIFNOTAVOIDED
7),,RESULTINDEATHORSERIOUSINJURY
4HISSYMBOLISUSEDTOALERTTHEUSERTOUSEFULINFORMATIONABOUT
PROPEROPERATIONOFTHEMACHINE
./4)#%
3AFETY)NSTRUCTIONSFOR-ACHINERY
3%#4)/.3!&%49
/.,9 !,,/7 42!).%$ !.$ 02/0
%2,9 350%26)3%$ 0%23/..%, 4/
/0%2!4% -!#().%29 BV`Z hjgZ
deZgVi^dc^chigjXi^dchVgZhV[ZVcYXaZVgan
jcYZghiddY#
+%%0#(),$2%.!.$6)3)4/23!7!9
@ZZe Vaa X]^aYgZc VcY k^h^idgh V hV[Z Y^h"
iVcXZ[gdbi]Zldg`VgZV#
-!+%7/2+3(/0#(),$02//& JhZ
eVYadX`h! bVhiZg hl^iX]Zh! VcY gZbdkZ
hiVgihl^iX]`Znh#
.%6%2 ,%!6% 7(%. -!#().% )3
25..).'IjgcedlZg/&&VcYVaadlVaa
bdk^c\eVgihidXdbZidVXdbeaZiZ hide
WZ[dgZaZVk^c\bVX]^cZjcViiZcYZY#
$/ ./4 53% ). $!.'%2/53
%.6)2/.-%.43 9D CDI jhZ bVX]^c"
Zgn ^c YVbe! lZi adXVi^dch! dg l]ZgZ Vcn
[aVbbVWaZdgcdm^djh[jbZhbVnZm^hi#
+%%07/2+!2%!#,%!.!.$7%,,
,)'(4%$8ajiiZgVcYYVg`h]VYdlhbVn
XVjhZVXX^YZcih#
53%! '2/5.$%$%84%.3)/. #/2$
2!4%$&/24(%-!#().%!-0%2!'%
<gdjcYZYXdgYhb^c^b^oZ h]dX` ]VoVgYh#
JcYZgh^oZY XdgYh XgZViZ ZmXZhh^kZ ]ZVi#
6alVnhgZeaVXZYVbV\ZYZmiZch^dcXdgYh#
!,7!93 $)3#/..%#4 &2/- 0/7%2
3/52#% "%&/2% 3%26)#).'
-!#().%29#BV`Z hjgZhl^iX] ^h^c
D;;
edh^i^dcWZ[dgZgZXdccZXi^c\#
-!).4!). -!#().%29 7)4( #!2%
@ZZeWaVYZhh]VgeVcYXaZVc[dgWZhiVcY
hV[ZhieZg[dgbVcXZ#;daadl^chigjXi^dch[dg
ajWg^XVi^c\VcYX]Vc\^c\VXXZhhdg^Zh#
-!+% 352% '5!2$3 !2% ). 0,!#%
!.$ 7/2+ #/22%#4,9 "%&/2%
53).'-!#().%29
3AFETY)NSTRUCTIONSFOR-ACHINERY
2%-/6% !$*534).' +%93 !.$
72%.#(%3BV`ZV]VW^id[X]ZX`^c\[dg
`ZnhVcYVY_jhi^c\ lgZcX]ZhWZ[dgZijgc"
^c\bVX]^cZgn/.#
#(%#+ &/2 $!-!'%$ 0!243
"%&/2%53).'-!#().%298]ZX`[dg
W^cY^c\dgb^hVa^\cZYeVgih!Wgd`ZceVgih!
addhZWdaih!VcYVcndi]ZgXdcY^i^dchi]Vi
bVn ^beV^g bVX]^cZ deZgVi^dc# GZeV^g dg
gZeaVXZYVbV\ZYeVgihWZ[dgZdeZgVi^dc#
53% 2%#/--%.$%$ !##%33/2)%3
GZ[Zgidi]Z^chigjXi^dcbVcjVa[dggZXdb"
bZcYZY VXXZhhdg^Zh# >begdeZg VXXZhhd"
g^Zh^cXgZVhZg^h`d[^c_jgn#
$/ ./4 &/2#% -!#().%29 Ldg` Vi
i]ZheZZY[dgl]^X]i]ZbVX]^cZdgVXXZh"
hdgnlVhYZh^\cZY#
3%#52% 7/2+0)%#% JhZ XaVbeh dg
V k^hZ id ]daY i]Z ldg`e^ZXZ l]Zc egVXi^"
XVa# 6 hZXjgZY ldg`e^ZXZ egdiZXih ndjg
]VcYhVcY[gZZhWdi]]VcYhiddeZgViZi]Z
bVX]^cZ#
$/./4 /6%22%!#(BV^ciV^chiVW^a^in
VcYWVaVcXZViVaai^bZh#
-!.9 -!#().%3 #!. %*%#4
7/2+0)%#%3 4/7!2$ /0%2!4/2
@cdlVcYVkd^YXdcY^i^dchi]ViXVjhZi]Z
ldg`e^ZXZid`^X`WVX`#
!,7!93 ,/#+ -/"),% "!3%3
)& 53%$ "%&/2% /0%2!4).'
-!#().%29#
#%24!). $534 -!9 "% (!:!2$/53
id i]Z gZhe^gVidgn hnhiZbh d[ eZdeaZ VcY
Vc^bVah!ZheZX^Vaan[^cZYjhi#7ZVlVgZd[
i]Z ineZ d[ Yjhi ndj VgZ ZmedhZY id VcY
ValVnhlZVgVgZhe^gVidgYZh^\cZYid[^aiZg
i]ViineZd[Yjhi#
Like all machines there is danger associated
with this machine. Accidents are frequently
caused by lack of familiarity or failure to pay
attention. Use this machine with respect
and caution to lessen the possibility of
operator injury. If normal safety precautions
are overlooked or ignored, serious personal
injury may occur.
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
Additional Safety Instructions for Jointers
1. JOINTER KICKBACK.
DO NOT
2.CUTTERHEAD ALIGNMENT.
3. PUSH BLOCKS.
4.WORKPIECE SUPPORT.
5.KICKBACK ZONE.
6. MAXIMUM CUTTING DEPTH.
7.JOINTING WITH THE GRAIN
8.KEEPING GUARDS IN PLACE.
9. PROPER CUTTING.
10.USING GOOD STOCK.
220V Operation
Full Load Amperage Draw
Power Supply Circuit Requirements
If you are unsure about the
wiring codes in your area or you plan to con-
nect your machine to a shared circuit, consult
a qualified electrician.
Extension Cords
Figure 4
SECTION 2: CIRCUIT REQUIREMENTS
Serious personal injury could occur if you
connect the machine to power before com-
pleting the setup process. DO NOT connect
the machine to the power until instructed
later in this manual.
Electrocution or fire could
result if machine is not
grounded and installed in
compliance with electrical
codes. Compliance MUST
be verified by a qualified
electrician!
Power Connection Device
Figure 4
Wear safety glasses dur-
ing the entire setup pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Setup Safety
SECTION 3: SETUP
Description Qty
Items Needed for
Setup
please imme-
diately call Customer Service at (570) 546-9663
for advice.
Otherwise, filing a freight claim can be difficult.
Unpacking
This machine and its com-
ponents are very heavy.
Get lifting help or use
power lifting equipment
such as a forklift to move
heavy items.
Inventory
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
Box 1: (Figure 5 & 6) Qty
A.
B.
C.
D.
E.
F. ....................................... 1
G.
H.
I.
J.
K.
L.
M.
N.
O.
Figure 5.
Figure 6.
SUFFOCATION HAZARD!
Immediately discard all plas-
tic bags and packing materi-
als to eliminate choking/suf-
focation hazards for children
and animals.
Floor Load
Machine Data Sheet
Placement Location
Figure 8
Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
Site Considerations
Figure 8.
-(
')&$'
Figure 7
For opti-
mum performance from your machine, clean
all moving parts or sliding contact surfaces.
Clean Up
Gasoline and petroleum
products have low flash
points and can explode
or cause fire if used to
clean machinery. DO
NOT use these products
to clean the machinery.
Many cleaning solvents
are toxic if inhaled.
Minimize your risk by only
using these products in a
well ventilated area.
G2544—Solvent Cleaner & Degreaser
Figure 7.
To lift the jointer
1.
2.
Figure 9
Moving & Placing
Jointer
The Model G0495X is a
heavy machine. Serious
personal injury may occur
if safe moving methods
are not used. To be safe,
get assistance and use
power equipment to move
the shipping crate and
remove the machine from
the crate.
Figure 9
Bolting to Concrete Floors
Figure 10
Mounting to Shop
Floor
NOTICE
Anchor studs are stronger and more per-
manent alternatives to lag shield anchors;
however, they will stick out of the floor,
which may cause a tripping hazard if you
decide to move your machine.
Figure10
3.
Figure 11.
Dust Collection
To connect the machine to a dust collector:
1.
Figure 11
DO NOT operate the Model G0495X without
an adequate dust collection system. This
jointer creates substantial amounts of wood
dust while operating. Failure to use a dust
collection system can result in short and
long-term respiratory illness.
Recommended CFM at Dust Port: 400 CFM
Do not confuse this CFM recommendation with
the rating of the dust collector. To determine
the CFM at the dust port, you must consider
these variables: (1) CFM rating of the dust col-
lector, (2) hose type and length between the
dust collector and the machine, (3) number
of branches or wyes, and (4) amount of other
open lines throughout the system. Explaining
how to calculate these variables is beyond the
scope of this manual. Consult an expert or pur-
chase a good dust collection "how-to" book.
2.
Note: A tight fit is necessary for proper per-
formance.
Figure 12.
Ide9ZVY
8ZciZg
7diidb9ZVY
8ZciZg
Setting Outfeed
Table Height
To set the outfeed table height:
1.
2.
3.
Figure 12
4.
Figure 13.
Figure 13.
HigV^\]iZY\Z
Dji[ZZY >c[ZZY
Figure 1Page 5
Test Run
TroubleshootingPage 32
Tip:
Steps 1-4
5.
Page 39
Digital Readout
Batteries
To install the AAA batteries in the control
panel:
1.
Figure 14
2.
Note:It may help to loosen the screws on the
front of the panel securing the digital readout
bracket to open the battery cover.
3.
Before starting the jointer, make sure you
have performed the preceding assembly
and adjustment instructions, and you have
read through the rest of the manual and
are familiar with the various functions and
safety features on this machine. Failure to
follow this warning could result in serious
personal injury or even death!
To test run the machine:
1.
2.
34/0"UTTON
4
7
)
3
4
Figure 15.
3.
4.
Figure 15
5.
SECTION 7: SERVICE
Factory adjustments that should be verified:
1. Page 34
2. Page 38
3.
Page 39
4. Page 40
5. Page
42
Recommended
Adjustments
6.
7.
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Operation Safety
SECTION 4: OPERATIONS
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
Basic Jointer
Controls
START Button:
STOP Button:
POWER Light
Figure 16.
Other manuals for G0495X
1
Table of contents
Other Grizzly Power Tools manuals
Grizzly
Grizzly T32795 User manual
Grizzly
Grizzly G0755 User manual
Grizzly
Grizzly KSG 220 Operating and installation instructions
Grizzly
Grizzly T27140 User manual
Grizzly
Grizzly G0634 Quick start guide
Grizzly
Grizzly G0476 Quick start guide
Grizzly
Grizzly G0612 User manual
Grizzly
Grizzly G7153 User manual
Grizzly
Grizzly G0610 User manual
Grizzly
Grizzly G0654 User manual
Grizzly
Grizzly G0704 User manual
Grizzly
Grizzly H2801 User manual
Grizzly
Grizzly G0958 User manual
Grizzly
Grizzly G0480 Quick start guide
Grizzly
Grizzly G0695 User manual
Grizzly
Grizzly Extreme Series User manual
Grizzly
Grizzly G0796 User manual
Grizzly
Grizzly G5913Z User manual
Grizzly
Grizzly G0836 User manual
Grizzly
Grizzly G0822 User manual
Popular Power Tools manuals by other brands
Slime
Slime Power Sport 40001 user manual
Jet
Jet WRT-2000 Specifications and parts list
Yokota
Yokota TKA700-C manual
Clarke
Clarke Woodworker CJS1-C Operating & maintenance instructions
SMA
SMA ESHV-P-NR installation guide
RAMSET
RAMSET LOW VELOCITY POWDER ACTUATED TOOL Operator's instruction & training manual
Flex
Flex LW 1202 Original operating instructions
EINHELL
EINHELL STE 350 operating instructions
Milwaukee
Milwaukee M12 JS Original instructions
Black & Decker
Black & Decker GK1000 instruction manual
Hazet
Hazet 9012 EL operating instructions
Desoutter
Desoutter SD100-AR820-S4Q Servicing and operating instructions