Grizzly T28941 User manual

For questions or help with this product contact Tech Support at [phone] or [e-mail]
MODEL T28941
WORK STOP
MEASURING SYSTEM
INSTRUCTIONS
COPYRIGHT © SEPTEMBER, 2019 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 6/19) #CS20519 PRINTED IN TAIWAN V1.09.19
Introduction
Description Qty
A. Carriage Rail .............................................. 1
B. Measuring Tape .......................................... 1
C. Adjustable Push Bar ................................... 1
D. Rail Extension ............................................ 1
E. Extension Bracket ...................................... 1
F. Workpiece Stop .......................................... 1
G. Carriage ...................................................... 1
H. Cap Screws M6-1 x 12 ............................... 4
I. Cap Screw M8-1.25 x 10 ............................ 1
J. Cap Screws M8-1.25 x 55 .......................... 4
K. Flat Washers 8mm ..................................... 4
L. Spacers 11ID x 17OD x 38 ......................... 4
M. Hex Bolts M6-1 x 16 ................................... 2
N. Lock Handle ............................................... 1
O. Steel Ball 10mm ......................................... 1
P. Workpiece Guide ........................................ 1
Inventory
Description Qty
A. G0613/G0614 Metal Bandsaw .................... 1
B. Assembled/Mounted T30399 Roller Set .... 1
C. Hex Wrenches 5, 6mm .........................1 Ea.
D. Wrench or Socket 6mm .............................. 1
Needed for Setup
Figure 2. Carriage and hardware.
G
K
H
J
I
L
P
O
M
N
Figure 1. Model T28941 inventory.
12345678910111213141516171819202122
2324
25
26
A
C
D
EF
B
The Model T28941 Work Stop Measuring System
is designed to work with the T30399 Infeed/
Outfeed Roller Set to produce fast, repetitive, and
accurate cuts.

-2- T28941 Work Stop Measuring System (Mfd. 6/19+)
Rail Extension
Measuring Tape
0"
3. Unroll measuring tape and affix to the full
measuring rail assembled in Step 2. Take
care to line up the edge, beginning at 0" (see
Figure 4).
4. Attach workpiece stop to end of push bar
using (2) M6-1 x 16 hex bolts (see Figure 5).
Figure 5. Workpiece stop and push bar.
5. Slide carriage onto measuring rail. Measure
gauge on carriage should depict measur-
ing numbers, or carriage is backwards (see
Figure 6).
Figure 4. Roller table with extended rail.
2. Attach carriage rail to roller table using (4)
M8-1.25 x 55 cap screws, (4) 8mm washers,
and (4) spacers (see Figure 4).
Assembly
Figure 3. Rail extension attached to carriage rail.
Figure 6. Assembled carriage and rail (roller
table removed for clarity).
Figure 7. Rail extension cap screw.
Measure
Gauge
6. Thread M8-1.25 x 10 cap screw into end of
rail extension to secure (see Figure 7).
1. Attach rail extension to carriage rail with
extension bracket and (4) M6-1 x 12 cap
screws (see Figure 3). Attach rail extension
to side of carriage rail shown in Figure 4, as
it will need clearance when rail is attached to
machine.
Bracket
Extension
Carriage Rail
Workpiece
Stop
Push Bar
x4
Measuring Rail

T28941 Work Stop Measuring System (Mfd. 6/19+) -3-
7. Insert steel ball into hole at back of carriage
(see Figure 8) and secure by screwing in
lock handle. Use this handle to position and
lock carriage at different measurements.
Figure 8. Steel ball secured by lock handle.
11. For cuts larger than 8", attach workpiece
guide to workpiece stop by screwing guide
threads into corner hole of stop (see Figure
11).
8. Set and lock measuring gauge at 0" then line
up push bar mounts at base of carriage (see
Figure 9). Slide push bar through mounts
with workpiece stop positioned on bandsaw
side.
10. Tighten pre-installed hardware in bar mounts.
Figure 10. Push bar aligned with workpiece
cutting point.
Work Stop
Bandsaw
Blade
9. Align workpiece stop with workpiece where it
will contact bandsaw blade (see Figure 10).
Carriage
Steel Ball
(hidden)
Lock Handle
Figure 11. Workpiece guide and stop. (Other
assembled parts removed for clarity).
Guide
Stop
Push Bar
Mounts
Figure 9. Push bar and mounts.

-4- T28941 Work Stop Measuring System (Mfd. 6/19)
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
6-3
6-2
6-1
6-4
6-5
6-6
6-7
6-8
6-9
6-10 6-11
6-12
6-15
6-16
6-17
6-18
6-19
6-20
6-21
6-13
6-14
5
7
8
2
3
4
6
9
10
1
12345678910111213141516171819202122232425262728293031323334353637383940
13
12
11
14
6-15
6-16
6-17
6-12
6-18
6-26
6-26
6-22
6-23
6-24
6-24
6-25
6-27
6-28
6-29
6-30
T28941 Parts Breakdown
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PT28941001 CARRIAGE RAIL 6-17 PT28941006-17 HEX NUT M5-. 8
2 PT28941002 CAP SCREW M6-1 X 12 6-18 PT28941006-18 BUTTON HD CAP SCR M5-.8 X 20
3 PT28941003 EXTENSION BRACKET 6-19 PT28941006-19 BEARING BAR
4 PT28941004 RAIL EXTENSION 6-20 PT28941006-20 FLAT WASHER 5MM
5 PT28941005 HEX BOLT M6-1 X 16 6-21 PT28941006-21 CAP SCREW M8-1.25 X 20
6 PT28941006 CARRI AGE 6-22 PT28941006-22 ROLL PIN 5 X 25
6-1 PT28941006-1 EXT TOOTH WASHER 5MM 6-23 PT28941006-23 CROSS BAR
6-2 PT28941006-2 MEASURING POINTER 6-24 PT28941006-24 LOCK NUT M8-1.25
6-3 PT28941006-3 PHLP HD SCR M5-.8 X 6 6-25 PT28941006-25 CARRI AGE MOUNT BAR
6-4 PT28941006-4 MEASURI NG WEDGE 6-26 PT28941006-26 CAP SCREW M8-1.25 X 25
6-5 PT28941006-5 SET SCREW M5-.8 X 6 6-27 PT28941006-27 CARRI AGE MOUNT
6-6 PT28941006-6 MEASURI NG ROD 6-28 PT28941006-28 HEX BOLT M6-1 X 16
6-7 PT28941006-7 CARRIAGE BODY 6-29 PT28941006-29 HEX NUT M8-1. 25
6-8 PT28941006-8 SET SCREW M4-.7 X 6 6-30 PT28941006-30 HEX BOLT M8-1.25 X 45
6-9 PT28941006-9 ADJ HANDLE 25 X 80, M12-1.75 X 40 7 PT28941007 ADJUSTABLE PUSH BAR
6-10 PT28941006-10 STEEL BALL 10MM 8 PT28941008 WORKPIECE STOP
6-11 PT28941006-11 SET SCREW 8-32 X 1/4 9 PT28941009 WORKPIECE GUIDE
6-12 PT28941006-12 BALL BEARING 608-2RS 10 PT28941010 MEASURING TAPE
6-13 PT28941006-13 ROLL PIN 5 X 20 11 PT28941011 CAP SCREW M8-1.25 X 55
6-14 PT28941006-14 CARRI AGE CONNECTI NG LOCK 12 PT28941012 FLAT WASHER 8MM
6-15 PT28941006-15 FLAT WASHER 8MM 13 PT28941013 SPACER 11ID X 17OD X 38
6-16 PT28941006-16 BALL BEARING 608-2RS 14 PT28941014 CAP SCREW M8-1.25 X 10
Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here
are available for purchase. Call [phone] or visit our online parts store at www.grizzly.com to check for availability.