Gronomics RGB 48-48 User manual

AssemblyInstructionSheet 30-Sep-11
GRONOMICS®
“TOOL FREE ASSEMBLY”
48”x 48” x 13” RAISED GARDEN BED
Parts Check List and Assembly Instructions
STEP I
A) Unpack all of the parts and organize them in ‘like’ stacks. Please read the
instructions in its entirety before beginning assembly.
You should have: Model #RGB 48-48
Model #RGB 48-48S
QUANTITY
PART DESCRIPTION
PART #
4
4” x 4” x 13” Corner Post
1300
Parts for the Sides
8
45”x 5½” x 1” Side Rail (One w/logo)
4501,4501L
Packaged & Inspected by:__________________________ Date____________________
NOTE: If you need assistance with parts or have assembly questions, please contact
Customer Service either via email at [email protected] or phone at 763-753-7374.

AssemblyInstructionSheet 30-Sep-11
GRONOMICS®
“TOOL FREE ASSEMBLY”
Note: Ground preparation is optional, we recommend
Leveling area under frame of bed before placing bed
and filling with soil.
STEP II
A) Start with two 4” x 4” x 13” corner posts, place
the posts upside down.
B) Slide one 45” x 5½” x 1” side rail between the
two posts. (see figure 1)
C) Repeat the same process with the other two
4” x 4” x 13” corner posts and another 45” x
5½” x 1” side rail. Make sure to place the 45” x
5½” x 1” side rail w/logo upside down in this
step.
STEP III
A) Connect the two corner posts by sliding a
45” x 5½” x 1” side rail into each post.
(see figure 2)
B) Slide the remaining four 45” x 5½” x 1” side rail
into the posts.
STEP IV
A) Turn right side up.
1-Year Warranty: All Gronomics®Products are warranted against all manufacturing defects of material or craftsmanship for a period of ONE full
year from date of purchase. Warranty does not cover cracking, damage caused by negligence, alterations or abuse in any way.
(Figure 1)
(Figure 2)
(Figure3)