
Cooker Hood / User Manual 9 / EN
3.1 Controlling the appliance
A B C D E
APress this button to turn on the appliance, the
product will operate at speed level 1, when
this button is pressed.
BThe product will operate at speed level 2,
when this button is pressed.
CBy exploring the display, you may follow which
speed the product operates at on it.
DThe product will operate at booster level,
when this button is pressed.
EPress this button to switch the lamp on and
off.
C
By pressing and holding any engine
operating button for more than 2
seconds, a 15 minutes timer func-
tion will be initiated. A signal will be
displayed as soon as the chronome-
ter starts, and the engine will auto-
matically stop after 15 minutes.
3.2 Energy efficient usage
•When using your appliance, adjust the speed
settings according to vapour and odour intensity,
in order to save energy.
•Use low speeds (1, 2) under normal conditions,
and booster level ( ) for intense odour and va-
pour.
•The lamps on the hood are placed for illuminat-
ing the cooking area.
•Using them for environmental lighting shall
cause unnecessary energy expenditure and in-
sufficient lighting.
3
Operation of the appliance
3.3 Operation of the hood
•Your appliance contains a motor that has various
speeds.
•For better performance, we recommend using
low speeds under normal conditions and high
speeds in cases of strong odours and intense
vapour.
•You can start your appliance by pressing on the
desired speed setting button. (A, B, D)
•You can illuminate the cooking area by pressing
the lamp (E).
3.4 Cleaning time for the metal filter
Filters must be cleaned when the signal “c” is dis-
played on the screen or (depending on the use)
after 3 or 4 weeks. In order to clear the “c” signal,
after the filters have been cleaned and replaced,
press and hold the button (A) for more than 3 sec-
onds (when the device is turned off). the letter “e”
will appear on the screen, and the appliance will
operate normally. if operations are necessary be-
fore clearing the letter “c”, then the active engine
speed will appear for 1 second when you press
the (A) button and then the engine will resume
functioning.
CThe “c” symbol will be displayed af-
ter 60 hours of functioning.