GT SONIC GT-X3 User manual

ULTRASONIC CLEANER
GT-X3
USER MANUAL
Thank you for purchasing GT SONIC ultrasonic cleaner. Please take the time
to read these operating instructions before use and retain them for future
reference. Failure to follow these instructions may lead to personal injury and
property damage.

CONTENT
01. Overview
02. Safety Precautions
06. Methods of Use
07. Care and Maintenance
....................................
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.................................................
.........................................
....................................................
.......................................
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
08. Warranty
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
10-11
3-6
6
10
2
8-9
7
03. Application
04. Working Principle
05. Operation Guide

01. OVERVIEW
2
Ultrasonic Power
Tank Size
20W
Φ80×40mm
(D×H)
Ultrasonic Frequency
Overall Size
43kHz
105×105×88mm
(L×W×H)
Product Ultrasonic Jewelry Cleaner Model No. GT-X3
Timer 5 Min Auto Off Capacity 200ml
Lid
LEDindicator On/Off button
Specifications
Note: Check if all accessories are included and undamaged.

3
02. SAFETY PRECAUTIONS
Keep it away from children
·Do not place the cleaner near a heat source or source of ignition.
·This device is not intended to use by individuals with restricted physical
sensory or mental capacities or those with lack of experience or knowledge,
including children, unless they are supervised by an individual who is
responsible for their safety or has received training in operating the device.
·Cleaning and user maintenance shall not be carried out by children without
supervision.
·Store the device and accessories where it is not reachable by children.
·Children must not play with packaging material.
·Do not allow children to play with bags.
·Danger of suffocation.
DANGER of electric shock as a result of moisture
·Do not use this device in the vicinity of bathtubs, showers, washbasins
or other vessels containing water.
·Never put the device down in such a way that it could fall into water while
still connected.

4
·Protect the device from moisture, dripping water or splash water.
·Never touch the device with the wet hands.
·The device, the cable and the mains plug must not fall into water or other
liquids.
·If the device has fallen into water, pull out the mains plug immediately, and
only then remove the device from the water. Do not use the device again, but
have it checked by a specialist.
DANGER of electric shock
·Do not operate the device if it or the cable shows visible signs of
damage or if the device has been dropped.
·Only connect the mains plug to a properly installed socket, which is easily
accessible and supplies voltage matching the rating plate. The socket must
still be easily accessible after connection.
·Ensure that the cable not damaged by sharp edges or hot surfaces. Do not
wrap the cable around the device (cable break danger!).
·Make sure the cable is not trapped or crushed.
·Unplug the device after cleaning.
·Remove the mains plug from the socket, when after each use, if a fault
occurs, when you are not using the device, before cleaning the device and
during thunderstorms.

5
WARNING! Risk of material damage
·Use the original accessories only.
·Never place the device on hot surfaces or near heat sources or open fire.
Place the device on a dry and even surface.
·Do not place the device on a soft surface that might cover the openings.
·Do not operate the device when the tank is empty.
Dry running will damage the device.
·Do not start the device without water in tank.
·When adding water, make sure not to exeed the "Max" line.
·Do not run the device for extended time or continuously .
·Do not expose the device to temperature below -10°C or above +40°C.
·To avoid any risk, do not make any changes to the device or
accessories.
·Do not replace the cable by yourself. Maintenance must only be carried out
by a specialized company.

Usage Points
6
03. APPLICATION
GT-X3 can effectively clean and disinfect diamonds, necklaces, bracelets,
rings and other jewels.
·Do not add corrosive chemical solvent in the cleaning tank to avoid
corrosion.
·Do not use alcohol, gasoline or other flammable liquid, otherwise it may
cause fire or explosion, and the damage caused is not covered by the
warranty.
·Do not turn on the cleaner when there is no water in the cleaning tank.
Running without water may damage the device.
·When adding water, make sure that the water cover cleaning items and do
not exceed the “MAX” mark.
·When putting the items, please take them lightly.
Ring Bracelet Necklace Earring Denture

04. WORKING PRINCIPLE
7
SUS304 TANK
Transducer
Generator
Tiny bubbles Cavitation Dirt come out
Solution
Detergent
Ultrasonic cleaning uses cavitation bubbles induced by high frequency
pressure (sound) waves to agitate a liquid. The agitation produces high forces
on contaminants adhering to substrates like metals, plastics, glass, rubber,
and ceramics. This action also penetrates blind holes, cracks, and recesses.

8
05. OPERATION GUIDE
2
1
MAX
1) Open the lid and fill the stainless steel tank
with water.
WARNING: Running without water may damage
the device!
2) Put the items in the water. The items should
be completely immersed. Do not exceed “MAX”
level.
3) Close the lid, connect the power cord to an
outlet.
3

9
4
4) Press the button, the blue indicator lights up, to
start 5 minutes working time. When the time is up,
the indicator will turn green and the cleaner stop
working automatically.
5) If you would like to stop cleaning during 5
minutes working time, simply press the button
again.
6) After the cleaning process is finished, unplug
the power cord, open the lid and remove the
items. Finally, pour the water out the tank. Clean
and wipe the tank.
6
6
5
Note: While cleaning, a buzzing sound will be
heard. This means the device is working.

06. METHODS OF USE
1
MAX
2
MAX
General cleaning
Use normal water for general cleaning. The
items should be completely immersed. However,
the water should not exceed the max line.
Thorough cleaning
In order to achieve better cleaning effect, you
may add a few drops of universal detergent.
We recommend using commercial dishwashing
detergent-preferably without an lipid-replenishing
substances (“balm”) .
For professional cleaning purposes, special cleaning detergent can be used.
Find out which concentrate is suitable for your items to be cleaned and the
type of contamination.
10
07. CARE AND MAINTENANCE
DANGER! Before cleaning the device, unplug the device. Never immerse the
device, cable or power plug in water or another liquid for cleaning and care
purpose.

11
·Use a piece of cloth to clean and dry the tank.
·Ensure that no residual water left in the tank in order to prevent limescale.
·Store the device in a cool and dry place.
·Keep the device out of children’s reach.
·Check the joint of the power plug and cord.
·Do not impact, hit the device. Handle with care when move the device.
08. WARRANTY
This product is warranted for one(1) year from the date of purchase. If there is
any faults in workmanship or malfunction, please contact our distributors,
agents or our after-sales service department, and do not repair it by non-
professionals.
Table of contents
Other GT SONIC Ultrasonic Jewelry Cleaner manuals