GTO®,GTO/PRO®, Bulldog®, GTO Access Systems™, are trademarks of GTO, Inc. and are the exclusive property of GTO,Inc. (“GTO”).
All rights are reserved by GTO, and these marks may not be used, in any for without the prior, written permission of GTO. Copyright © 2008 rev-3-2008
www.gtoaccess.com
ACCESS
SYSTEMS
Technology • Innovation • Quality
Since 1987
COMMERCIAL SERIES
GP-SL100
CONTINUOUS DUTY SLIDE GATE OPERATOR
Inherent UPS
(Battery Back-up)
System
DIMENSIONS:
Height: 27”
Depth: 18”
Width: 15”
SHIPPING WEIGHT: 84 lbs.
(39 kg) Meets UPS shipping standards.
WARRANTY:
7 year residential 5 year commercial
CLASS OF OPERATION:
Class I, II, III, IV
SAFETY LISTINGS:
System Certied with UL325 5th Edition
safety standards, ETL listed
DUAL GATE APPLICATIONS:
The GP-SL100 is dual gate capable via
communication link wires (14 – 20
gauge multi stranded 2-wire shielded)
CAPACITY:
The GP-SL100 is designed for operation of
slide gates. Max Gate; Weight 1200 lbs. (544.3 kg),
Length 37 ft. (11.3 m) with a 32 ft. (9.8 m) opening.
(For bi-parting dual gates, a second operator is required).
Assumes gate to be free sliding, in good working condition,
and on a level plane.
MECHANICAL SPECIFICATIONS:
• AC Powered with inherent UPS (Uninterrupted Power System /
Battery Backup) gate operation and all DC powered counters /
safety devices.
• On board 12 V DC power delivers 300 Amp UPS
• 120 Vac 60 Hz built in power receptacles (1 amp rated)
• 25:1 direct drive worm gear with totally enclosed gear reduction
• 2500 RPM, 24V brushless DC motor - 1/2 HP. equivalent
• Operating temp 5 F (-28C) to +160 F (71 C)
• Non back-drive gearbox with ball bearing output shaft
• #41 Chain
• 12” per second maximum travel speed
• Weatherproof high density ABS, UV resistant cover
• Heavy Duty Steel Chassis
ELECTRICAL SPECIFICATIONS:
• GTO’s advanced technology commercial control board
— Digital / optical limits with ne adjustment JOG push buttons
for easy and accurate setting of limits
— 100% solid-state motor controls circuitry
— APS (Absolute Position System) tracking system
— On board 3-Push button control station
• Operation, diagnostic and safety alarms, reverse sensor system
• Visual LED and audible diagnostic indicators
• Plug-in loop detector inputs for exit, shadow and safety loops
• Smooth start / smooth stop—for long mechanical
life expectancy
• Built in power management system utilizing a high efency
switchmode power supply. (AC power supply, audible and visual
low battery indicators, no loss of functionality in battery back up mode)
• Auto close adjustable 3-120 seconds delay
• Fail Safe or Fail Secure DIP switch selectable for low battery operation
• 12 Vdc, 300mA (.3 Amp), poly fuse protected auxiliary power output.
SUGGESTED ACCESSORIES:
• Pluggable loop detectors (LOOPDT1)
• Driveway Vehicle Sensor:
(50’-250’ lengths) (FM139-FM141)
• Safety Photo Beams (R4222)
• Estate Wireless Intercom with
integrated keypad (F4100MBC)
• Universal receiver (RB709U-NB)
• Loops (L-SC-408-L-PO-0612)
• Keychain Transmitter (RB741)
• Digital Keypad (F310)
GP-SL100-CS
