Preventing of Lost
Slave Unit Master Unit
Mode I : Preventing of lost
For example: children,elderly or pets
Connection- Master unit and Slave unit.
- Open the panel of Slave unit, and switch to “ON”. The LED is steady ON
by Blue and Red.
- Open the panel of Master unit, and switch to I (as shown on the picture).
The LED is steady ON by blue and red.
Connecting : Master unit and Slave unit would search for connection and
blue LED steady “ON” after pressing button on the Master unit for a second.
After connection, you will hear a short sound of beep, and the Blue LED
indicator on Master unit and Slave unit will flash every 2 seconds.
Alarm Initiation and Relieve:
- If the distance between Master unit and Slave unit is over 3m, the Master
unit and Slave unit will keep alarming and the LED indicators will flashes red
to blue light interactively.
- While Master unit and Slave unit are coming back within 3 meters, it would
stop alarming and flashing. The Master unit and Slave unit will come back
to the normal status.
connection
