GUBI EPIC Quick guide

04-11-650-02 Assembly & Maintenance Instructions Epic Table.
ASSEMBLY & MAINTENANCE INSTRUCTIONS
for
EPIC TABLE
For enquiries contact GUBI A/S - CVR: 17940384
Klubiensvej 7-9. 2150 Nordhavn. Copenhagen, Denmark
T [phone] – [e-mail]
GUBI.COM

ASSEMBLY INSTRUCTIONS
EPIC TABLE
1. 2.
CONTENTS
x1 Tabletop x1 Column x6 Bumpers
Place the column with the bolt facing up.
Glue the bumpers on the corners of the column.
3.
Screw the tabletop onto the bolt in the middle.
CAUTION: DO NOT LIFT TABLE BY TOP!
DO NOT lift the table only by the tabletop. When
moving the table, dismount the screws in the tabletop.
Remove the tabletop from the column.
Do not overtighten the top. Once it reaches the
bumpers it does not need to be tightened more.
MAINTENANCE INSTRUCTIONS
Daily Cleaning
Maintenance
Heat Stress
TRAVERTINE SURFACES
METAL SUPPORT PLATE
All GUBI’s travertine tabletops get a protective treatment before they are sent to the customer. Stone is a
natural product and as such it has variations in tone, colour, granularity and pattern. Because of this, a sample
may not exactly match a slab or finished product. The samples should give a general idea of the colour, finish
and pattern of the stone you choose.
All stones have veining and crystallizations that can appear to be cracks or pits but are actually a natural
property of the stone. Stone forms over thousands if not millions of years. These slow processes lead to many
variations in structure, colour and pattern. It is precisely these variations that make stone such an appealing
material. The stone is filled with resin and after that a protective treatment is applied.
For dusting and light cleaning use a soft, dry cloth. For further cleaning, use a soft cloth that is firmly wrung
in clean water for gently wiping the surface, and then immediately use a dry cloth to wipe the surface again. If
more thorough cleaning is necessary, use a mild liquid soap dissolved in water on a firmly wrung cloth to wipe
the frame. Afterwards, repeat the process with clean water as described above
Normal cleaning is done by wiping the surface with
a damp soft cloth, then wipe dry. Travertine is a
limestone and therefore doesn’t tolerate acidic liquid
such as vinegar, lemon juice or wine due to the risk
of staining. Stains such as these may be impossible
to remove. In case of spilling something acidic on
the marble top, immediately wash away! Do not use
scouring pads, acidic detergents or abrasive cleaners
as this may damage the surface.
All our table tops are delivered with a sealing product
applied. Travertine tops require some maintenance
every 8-12 months, depending on the type of use.
This maintenance can be done with a separately
purchased marble/stone treatment kit, by following
the instructions included with the purchased product.
Travertine can withstand heat for short periods, but
doesn’t tolerate extremely high temperatures. Glowing
hot cookware directly from the stove can mark or
damage travertine. This will show as a spot and cracks
can also appear. In such cases please use a trivet. To
avoid marking or scratching the surface, avoid pulling
abrasive objects across the travertine plate.
Lift the tabletop onto the column. (Due to the weight of
the tabletop it would be ideal if two people handle the
lifting and a third person guides the tabletop in place).