GUBI 52 User manual

Gubi 52 Chair Wood 21001-52-XX Assembly instruction
19. november 2014 Assembly Instruction 01-15-210-00
Products:
Gubi Chair shell –wood front
upholstered, 4-leg wooden base –non
stackable, 4 pcs M6x20 flat head
screw, 4 pcs rubber washer,
Tools:
Akku drill or screwdriver with Unbraco
4 bit
Products:
Gubi chair shell –wood front
upholstered.
Action:
Turn the shell upside down, so the
holes on the backside of the seat is
visible and faces upwards.
Products:
Gubi chair shell –wood front
upholstered, Würth DOS thread
locking agent MEDIUM, Art. No.
0893243050
Action:
Apply a suitable amount of the locking
agent in the 4 pcs mounting holes
Products:
4 pcs M6x20 Unbraco 4 flat head screw
from Disosols, 4 pcs rubber washer
47x4,9x3 mm EPDM 80 sh Klinger
Danmark Art. No. 2925.

Gubi 52 Chair Wood 21001-52-XX Assembly instruction
19. november 2014 Assembly Instruction 01-15-210-00
Products:
4-leg wooden base –non stackable, 4
pcs flat head screw
Action:
Put 1 screw through the bottom of the
wooden base.
Products:
4-leg wooden base –non stackable, 4
pcs flat head screw, 4 pcs rubber
washer
Action:
Place a rubber washer on top of the
screw on the top side of the wooden
base.
Products:
4-leg wooden base –non stackable, 4
pcs flat head screw, 4 pcs rubber
washer
Action:
Press the rubber washer down on the
top of screw.
Products:
4-leg wooden base –non stackable, 4
pcs flat head screw, 4 pcs rubber
washer
Action:
The rubber washer will now hold the
screw fixed to the wooden base.

Gubi 52 Chair Wood 21001-52-XX Assembly instruction
19. november 2014 Assembly Instruction 01-15-210-00
Products:
4-leg wooden base –non stackable, 4
pcs flat head screw, 4 pcs rubber
washer
Action:
Now do the same with the rest of the
screw, so all 4 screws are fixed to the
wooden base
Products:
Gubi chair shell –wood front
upholstered, 4-leg wooden base, 4 pcs
M6x20 flat head screw, 4 pcs rubber
washer
Action:
Place the wooden base with the fixed
screws on top of the shell, so the
screws in the base catches the holes in
the shell.
Products:
Gubi chair shell –wood front
upholstered, 4-leg wooden base, 4 pcs
M6x20 flat head screw, 4 pcs rubber
washer
Action:
Make sure that all screws are correct
into the thread in the shell.
Action:
The M6 screws can be tightened with a
screwdriver or an Akku drill.

Gubi 52 Chair Wood 21001-52-XX Assembly instruction
19. november 2014 Assembly Instruction 01-15-210-00
Action:
Please make sure all screws are
tightened properly.
Action:
Turn the chair around and place it on
the legs.
The Gubi chair is ready for use.