GUBI 21001-1F-01 User manual

Gubi 1F Chair Wood 21001-1F-01 Assembly instruction
19. november 2014 Assembly Instruction 01-15-105-01
Products:
Gubi Chair shell - wood, 4-leg steel
centerbase –non stackable, 4 pcs
M6x12 pan head screw, 4 pcs M6
washer, 4 pcs plastic feet
Tools:
Akku drill or screwdriver with PH3 bit
Products:
Gubi chair shell - wood.
Action:
Turn the shell upside down, so the
holes on the backside of the seat is
visible and faces upwards.
Products:
Gubi chair shell –wood, Würth DOS
thread locking agent MEDIUM, Art. No.
0893243050
Action:
Apply a suitable amount of the locking
agent in the 4 pcs mounting holes
Products:
4 pcs plastic foot Ackurat Art. No. IFS
23-10 23 degrees
or
4 pcs plastic foot Ackurat Art. No. IFS
23-10 23 degrees with felt

Gubi 1F Chair Wood 21001-1F-01 Assembly instruction
19. november 2014 Assembly Instruction 01-15-105-01
Products:
4-leg steel centerbase –non stackable,
4 pcs plastic foot.
Products:
4-leg steel centerbase –non stackable,
4 pcs plastic foot
Action:
Place the foot in the end of the leg in
the right direction –the grove in foot
shall point towards the center of the
frame
Products:
4-leg steel centerbase –non stackable,
4 pcs plastic foot
Action:
Press the foot into the tube with your
thumb. The same has to be done with
the last 3pcs foot
Products:
4 pcs M6x12 PH 3 pan head screw
Würth Art. No. 0046612, 4 pcs washer
15x6,4x1,5 mm Würth Art. No.
0411615

Gubi 1F Chair Wood 21001-1F-01 Assembly instruction
19. november 2014 Assembly Instruction 01-15-105-01
Products:
Gubi chair shell –wood, 4-leg steel
centerbase
Action:
Place the steel base on top of the shell,
so the 4 holes on the base are above
the holes in the shell.
Products:
Gubi chair shell –wood, 4-leg steel
centerbase, 4 pcs M6x12 PH 3 pan
head screw, washer 15x6,4x1,5 mm
Action:
Put all 4 pcs screw with washers on
through the frame into the shell
Products:
Gubi chair shell –wood, 4-leg steel
centerbase, 4 pcs M6x12 PH 3 pan
head screw, washer 15x6,4x1,5 mm
Action:
Make sure that all screws are correct
into the thread in the shell
Action:
The M6 screws can be tightened with a
screwdriver or an Akku drill.

Gubi 1F Chair Wood 21001-1F-01 Assembly instruction
19. november 2014 Assembly Instruction 01-15-105-01
Action:
Please make sure all screws are
tightened properly.
Action:
Turn the chair around and place it on
the legs.
The Gubi chair is ready for use.