GUBI S-Table Dining Table Extendable 10058061 User manual

ASSEMBLY INSTRUCTIONS
for
S-Table Dining Table
Extendable

CONTENTS
1.
x1 x2 x2 x2
x10 x4
x1 x1
Unpack the table, removing the sliding tops from the frame.
x4 x4

2.
Turn the frame over.
Down
Up

4.
3.
Fully insert the disc, in the right direction as shown in the figure.
Screw the insert.

5.
Insert the legs all the way in, then tight the disc, which must pull
the insert towards the frame.
6.
Connect the legs to the frame using suppliend screws.

8.
Insert the loose tops and sliding tops.
7.
Stand the table up.

8.
Close the sliding tops.
7.
Insert the 4 thumb screws into the sliding tops to secure them.

Expanding the table
1.
Open the sliding tops and remove the loose tops.

2.
Rotate the loose tops.

3.
Place the loose tops on the frame and close the sliding tops.

Assembly Instructions S-Table Dining Table Extendable.
CARE INSTRUCTIONS
VENEER
For dusting and light cleaning use a soft, dry cloth. For further cleaning,
use a soft cloth that is firmly wrung in clean water for gently wiping the
surface, and then immediately use a dry cloth to wipe the surface again.
If more thorough cleaning is necessary, use a mild liquid soap dissolved
in water on a firmly wrung cloth to wipe the frame. Afterwards, repeat
the process with clean water as described above
For enquiries contact GUBI A/S - CVR: 17940384
Klubiensvej 7-9. 2150 Nordhavn. Copenhagen, Denmark
T [phone] – [e-mail]
GUBI.COM