GUBI Beetle Lounge Chair User manual

BEETLE Lounge chair and sofa Assembly instruction
23. February 2017 Assembly Instruction 04-15-130-02
Assembly instruction for the following lounge chair & Sofa–with fully upholstered WOOD shell:
Beetle Lounge Chair
Beetle Sofa
Products:
•Upholstered Beetle shell (Lounge or Sofa)
•4-leg steel base (Lounge or sofa)
•2x (3x for sofa) front: M5x30 black (DIN 912 / ISO
4762)
•2x (3x for sofa) back: M5x25 black (DIN 912 / ISO
4762)
•4x QuickClick Base Ø14
(Wagner part no: 15 8117 01)
•4x QuickClick Black slim insert Ø20
(Wagner part no: 15 8289 01)
•4x Countersunk self-drilling screw ST2,9 x 9,5 ZP
(DIN 7982-C-H)
Tools:
Akku drill or Unbraco key size 4 + Torx size 10.
Loctite medium strength (Würth DOS thread locking agent
MEDIUM, Art. No. 0893243050)
Mounting glides on frame
Products:
•4x QuickClick Base Ø14
(Wagner part no: 15 8117 01)
•4x Countersunk self-drilling screw ST2,9 x 9,5 ZP
(DIN 7982-C-H)
•4x QuickClick Black slim insert Ø20
(Wagner part no: 15 8289 01)

BEETLE Lounge chair and sofa Assembly instruction
23. February 2017 Assembly Instruction 04-15-130-02
Products:
4x QuickClick Base Ø14
Action:
Place the QuickClick bases on the legs.
Make sure the countersunk hole is visible (like the picture)
Products:
4x Countersunk self-drilling screw ST2,9 x 9,5 ZP (DIN
7982-C-H)
Action:
Mount the screw into the frame –to fasten the QuickClick
bases to the frame.
NB. Maximum torque 1,4 Nm
Products:
4x QuickClick Black slim insert Ø20
Action:
Place the Quick click inserts on the ground and the feet
(with mounted QuckClick bases on) on top.
Action:
Apply force until you hear a “CLICK” from the feet.
The feet are now mounted –repeat for all 4 legs.
Mounting shell on the frame

BEETLE Lounge chair and sofa Assembly instruction
23. February 2017 Assembly Instruction 04-15-130-02
Products:
4-leg wooden upholstered shell
Loctite
Action:
Turn the Beetle shell upside down and apply Loctite in the
4x M5 holes (6x M5 holes for sofa).
Products:
Upholstered Beetle shell (lounge or sofa).
Steel chair base.
Action:
Place the steel base on top of the shell, so the 4 holes (6
holes for sofa, 2 extra hole in the middle of the shell) on
the base are above the holes in the shell.
Products:
2x front (3x for sofa): M5x30 black
2x back (3x for sofa): M5x25 black
Action:
Please place the base exactly as on the picture.
The 2 bend as the one marked with the red arrows on the
picture, shall be placed forward on the shell.
(The mounting holes have different distance –so if the
screw holes do not fit, you might have turned the frame
the wrong way.)
Front Back

BEETLE Lounge chair and sofa Assembly instruction
23. February 2017 Assembly Instruction 04-15-130-02
Action:
Mount the 2x M5x25 (3x for sofa) screws in the back and
2x M5x30 (3x for sofa) screws in the front (higher
mounting towers).
Important: Do not tighten the screws before all 4 pcs (or 6pcs
for sofa) screws have been inserted to the thread.
NB. Maximum torque 10 Nm.
NB. Screw needs to be firmly mounted
Action:
Turn the lounge chair/sofa back up and place it on the
legs.
The Beetle chair is ready for use.