GUBI BEETLE User manual

BEETLE chair Assembly instruction –for changing glides
06. Februar 2017 Assembly Instruction 04-15-101-01
Action:
You need a slotted
screwdriver or similar.
Products:
4 pcs. plastic glides (in the
type you need.)
Action:
Place the screw driver
CAREFULLY and press it in
between the glider and the
feet of the chair.
Be careful not to scratch the
chair and feet.
Action:
When the screwdriver is
between the feet and the
glider –angle the screwdriver
away from the feet/chair (to
avoid damaging the feet).
The glider should pop right off.

BEETLE chair Assembly instruction –for changing glides
06. Februar 2017 Assembly Instruction 04-15-101-01
Action:
Place the new glider on the
floor, with the mounting side
upwards.
Place the foot on top of the
glider
Action:
When the glider is placed
directly under the foot.
Add pressure on the seat –the
glider will then pop onto the
base.
Finished product:
The glider is now attached.
In the picture, you see the
Beetle felt glider.