GUBI TABLE 2.0 User manual

07-20-200-05 Mounting Instructions Gubi Table 2.0.
CARE INSTRUCTIONS
FRAME/GLASS/LAMINATE
MARBLE
WOOD
For dusting and light cleaning use a soft, dry cloth. For further cleaning,
use a soft cloth that is firmly wrung in clean water for gently wiping the
surface, and then immediately use a dry cloth to wipe the surface again.
If more thorough cleaning is necessary, use a mild liquid soap dissolved
in water on a firmly wrung cloth to wipe the frame. Afterwards, repeat
the process with clean water as described above
For marble maintenance, see the included marble instruction sheet.
For dusting and light cleaning use a clean dry cloth, or a cloth hardly
wrung in clean water. Dirty surfaces are cleaned with a hardly wrung
cloth out of soapy water or in water with added mild liquid soap. Wipe
after with a clean dry cloth.
ASSEMBLY INSTRUCTIONS
for
GUBI TABLE 2.0
Frihavnen Klubiensvej 7-9
Pakhus 53
DK 2150 Copenhagen
Phone: [phone]
Fax: [phone]
www.gubi.com
Gubi Table 2.0 - For mounting instruction
DWG NO.:
MATERIAL:
INITIALS:
PAPER SIZE:
DESCRIPTION:
PROPERTY AND CONFIDENTIAL INFORMATION: This design may not be distributed or reproduced without the written permission of GUBI A/S
SHEET 1 OF 6
17-10-2016
A3
IF NOTHING ELSE SPECIFIED MEASUREMENTS IN MM
APPROVED BY: DATE:
DS/ISO 2768-1 m
GENERAL TOLERANCES:
1:5
SCALE:
Gubi Table 2.0 Pillar
REVISION DATE:
REVISION:
05
KBR
ILT
WEIGHT [g]
26-06-2015
PRODUCT:
For enquiries contact GUBI A/S - CVR: 17940384
Klubiensvej 7-9. 2150 Nordhavn. Copenhagen, Denmark
T [phone] – [e-mail]
GUBI.COM

ASSEMBLY INSTRUCTIONS
GUBI TABLE 2.0
1. 2.
4.
CAUTION: DO NOT LIFT TABLE BY TOP!
Two Column
3.
CONTENTS (MARBLE)
CONTENTS (WOOD/LAMINATE/GLASS)
x8
x8
x10
x10
x8
x8
x1
x1
x1
x1
x1
x1
x1
x1
Frihavnen Klubiensvej 7-9
Pakhus 53
DK 2150 Copenhagen
Phone: [phone]
Fax: [phone]
www.gubi.com
1:10
1:1
1x 1x 1x 1x
10x 1x 10x 10x 4x
Gubi Table 2.0 - For mounting instruction
DWG NO.:
MATERIAL:
INITIALS:
PAPER SIZE:
DESCRIPTION:
PROPERTY AND CONFIDENTIAL INFORMATION: This design may not be distributed or reproduced without the written permission of GUBI A/S
SHEET 2 OF 6
MDF
01-07-2015
A3
IF NOTHING ELSE SPECIFIED MEASUREMENTS IN MM
APPROVED BY: DATE:
DS/ISO 2768-1 m
GENERAL TOLERANCES:
1:10
SCALE:
GUBI 2.0 Tabletop Round
REVISION DATE:
REVISION:
02
LEB
JUH
WEIGHT [g]
23000.93
02-09-2014
PRODUCT:
MDF
Frihavnen Klubiensvej 7-9
Pakhus 53
DK 2150 Copenhagen
Phone: [phone]
Fax: [phone]
www.gubi.com
1:10
1:1
1x 1x 1x 1x
10x 1x 10x 10x 4x
Gubi Table 2.0 - For mounting instruction
DWG NO.:
MATERIAL:
INITIALS:
PAPER SIZE:
DESCRIPTION:
PROPERTY AND CONFIDENTIAL INFORMATION: This design may not be distributed or reproduced without the written permission of GUBI A/S
SHEET 2 OF 6
MDF
01-07-2015
A3
IF NOTHING ELSE SPECIFIED MEASUREMENTS IN MM
APPROVED BY: DATE:
DS/ISO 2768-1 m
GENERAL TOLERANCES:
1:10
SCALE:
GUBI 2.0 Tabletop Round
REVISION DATE:
REVISION:
02
LEB
JUH
WEIGHT [g]
23000.93
02-09-2014
PRODUCT:
MDF
Frihavnen Klubiensvej 7-9
Pakhus 53
DK 2150 Copenhagen
Phone: [phone]
Fax: [phone]
www.gubi.com
1:10
1:1
1x 1x 1x 1x
10x 1x 10x 10x 4x
Gubi Table 2.0 - For mounting instruction
DWG NO.:
MATERIAL:
INITIALS:
PAPER SIZE:
DESCRIPTION:
PROPERTY AND CONFIDENTIAL INFORMATION: This design may not be distributed or reproduced without the written permission of GUBI A/S
SHEET 2 OF 6
MDF
01-07-2015
A3
IF NOTHING ELSE SPECIFIED MEASUREMENTS IN MM
APPROVED BY: DATE:
DS/ISO 2768-1 m
GENERAL TOLERANCES:
1:10
SCALE:
GUBI 2.0 Tabletop Round
REVISION DATE:
REVISION:
02
LEB
JUH
WEIGHT [g]
23000.93
02-09-2014
PRODUCT:
MDF
Frihavnen Klubiensvej 7-9
Pakhus 53
DK 2150 Copenhagen
Phone: [phone]
Fax: [phone]
www.gubi.com
1:10
1:1
1x 1x 1x 1x
10x 1x 10x 10x 4x
Gubi Table 2.0 - For mounting instruction
DWG NO.:
MATERIAL:
INITIALS:
PAPER SIZE:
DESCRIPTION:
PROPERTY AND CONFIDENTIAL INFORMATION: This design may not be distributed or reproduced without the written permission of GUBI A/S
SHEET 2 OF 6
MDF
01-07-2015
A3
IF NOTHING ELSE SPECIFIED MEASUREMENTS IN MM
APPROVED BY: DATE:
DS/ISO 2768-1 m
GENERAL TOLERANCES:
1:10
SCALE:
GUBI 2.0 Tabletop Round
REVISION DATE:
REVISION:
02
LEB
JUH
WEIGHT [g]
23000.93
02-09-2014
PRODUCT:
MDF
Frihavnen Klubiensvej 7-9
Pakhus 53
DK 2150 Copenhagen
Phone: [phone]
Fax: [phone]
www.gubi.com
1:10
1:1
1x 1x 1x 1x
10x 1x 10x 10x 4x
Gubi Table 2.0 - For mounting instruction
DWG NO.:
MATERIAL:
INITIALS:
PAPER SIZE:
DESCRIPTION:
PROPERTY AND CONFIDENTIAL INFORMATION: This design may not be distributed or reproduced without the written permission of GUBI A/S
SHEET 2 OF 6
MDF
01-07-2015
A3
IF NOTHING ELSE SPECIFIED MEASUREMENTS IN MM
APPROVED BY: DATE:
DS/ISO 2768-1 m
GENERAL TOLERANCES:
1:10
SCALE:
GUBI 2.0 Tabletop Round
REVISION DATE:
REVISION:
02
LEB
JUH
WEIGHT [g]
23000.93
02-09-2014
PRODUCT:
MDF
Frihavnen Klubiensvej 7-9
Pakhus 53
DK 2150 Copenhagen
Phone: [phone]
Fax: [phone]
www.gubi.com
1:10
1:1
1x 1x 1x 1x
10x 1x 10x 10x 4x
Gubi Table 2.0 - For mounting instruction
DWG NO.:
MATERIAL:
INITIALS:
PAPER SIZE:
DESCRIPTION:
PROPERTY AND CONFIDENTIAL INFORMATION: This design may not be distributed or reproduced without the written permission of GUBI A/S
SHEET 2 OF 6
MDF
01-07-2015
A3
IF NOTHING ELSE SPECIFIED MEASUREMENTS IN MM
APPROVED BY: DATE:
DS/ISO 2768-1 m
GENERAL TOLERANCES:
1:10
SCALE:
GUBI 2.0 Tabletop Round
REVISION DATE:
REVISION:
02
LEB
JUH
WEIGHT [g]
23000.93
02-09-2014
PRODUCT:
MDF
Frihavnen Klubiensvej 7-9
Pakhus 53
DK 2150 Copenhagen
Phone: [phone]
Fax: [phone]
www.gubi.com
1:10
1:1
1x 1x 1x 1x
10x 1x 10x 10x 4x
Gubi Table 2.0 - For mounting instruction
DWG NO.:
MATERIAL:
INITIALS:
PAPER SIZE:
DESCRIPTION:
PROPERTY AND CONFIDENTIAL INFORMATION: This design may not be distributed or reproduced without the written permission of GUBI A/S
SHEET 2 OF 6
MDF
01-07-2015
A3
IF NOTHING ELSE SPECIFIED MEASUREMENTS IN MM
APPROVED BY: DATE:
DS/ISO 2768-1 m
GENERAL TOLERANCES:
1:10
SCALE:
GUBI 2.0 Tabletop Round
REVISION DATE:
REVISION:
02
LEB
JUH
WEIGHT [g]
23000.93
02-09-2014
PRODUCT:
MDF
Marble: Align the frame with the threaded holes in
the table top. Mount with 8x machine screws.
DO NOT lift the table only by the table top. When moving the table, dismount the screws in the table
top. Remove the table top from the frame. Move the frame and put the table top back on.
Marble: Use the 16x maschine screws. Align the frame with
the threaded holes in the table top.
Wood, laminate and glass: Use the 16x wood screws. Align
the frame with the predrilled holes in the marble table top.
Holes may be hidden under felt covering.
Use four of the countersunk screws
to screw together the base plate
and the column.
Place the top piece on the column and screw
them together with four countersunk screws.
Peel the paper off and stick the felt
glides evenly around the edge of the
bottom of the base plate. For the
best visual result - keep a distance of
over 1,5 cm to the edge.
Frihavnen Klubiensvej 7-9
Pakhus 53
DK 2150 Copenhagen
Phone: [phone]
Fax: [phone]
www.gubi.com
no. 4
Marble: Use the 10x maschine screws.
Align the frame with the threaded
holes in the table top.
Wood and glass: Use the 10x wood
screws. Align the frame with the
predrilled holes in the marble table
top.
Finished table:
DO NOT lift the table only in the table
top.
If you have to move the table,
dismount the screws in the table top.
Remove the table top from the frame.
Move the frame and put the table top
back on.
Mounting instruction 300317
DWG NO.:
MATERIAL:
INITIALS:
PAPER SIZE:
DESCRIPTION:
PROPERTY AND CONFIDENTIAL INFORMATION: This design may not be distributed or reproduced without the written permission of GUBI A/S
SHEET 1 OF 1
26-02-2015
A3
IF NOTHING ELSE SPECIFIED MEASUREMENTS IN MM
APPROVED BY: DATE:
DS/ISO 2768-1 m
GENERAL TOLERANCES:
1:20
SCALE:
Gubi 2.0 Pillar wood Assembly
REVISION DATE:
REVISION:
00
EFL
JEH
WEIGHT [g]
PRODUCT:
Wood, laminate and glass: Align the frame with the
predrilled holes in the marble table top. Holes may be
hidden under felt covering. Mount with 8x wood screws.