GVA GVAH03 User manual

Instruction Manual
Ceramic Fan Heater
/ GVAH03

2
Important Safety Instructions
Store this instruction manual in a safe place, along with your warranty card, purchase
receipt and packaging box for future reference. Please pay particular attention to the
safety information.
• This product is intended for household, industrial and commercial use only.
It is not intended for outside use.
• To protect against electric shock, do not place heater in window, immerse unit plug or cord in
water or spray with liquids.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug the heater from the outlet when not in use, when moving heater from one location to
another and before cleaning.
• Do not operate the heater in the presence of explosive and/or ammable fumes.
• Do not place the heater or any parts near an open ame, cooking or other
heating appliance.
• Do not operate the heater with a damaged cord, plug, after a malfunction or if dropped or
damaged in any manner.
• The front grid gets very hot when in use, so treat this heater as you would an electric bar re.
• To disconnect grip the plug and pull it from the wall outlet. Never yank the cord.
• Always use on a dry level surface.
• Do not operate if the heater housing is removed or damaged.
• Warning: To reduce the risk of re or electric shock, do not use this heater with
any speed control or timer.
• Do not leave the heater running unattended.
• Ensure that the heater is switched o from the supply mains before removing
the guard.
• If the supply cord is damaged, it must be replaced by manufacturer or its service agent or a
similarly qualied person in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Disconnect heater when moving from one location to another.
• Be sure heater is on a stable surface when operating to avoid overturning.
• Do not cover the heater when in use and make sure that there is at least 12 inches of clearance
behind it so that the air intakes are not obstructed.
• Ensure that no object of any kind is within two meters of the heater when it is use.
• Do not position it directly below a power socket

3
Parts
1. Thermostat Temperature Control
2. Oscillation Control Button
3. Heating Power Knob
4. Body
5. Heating Element
Buttons and Functions
0 = OFF
= Fan only, no heat
I = Low heat output
II = Full heat output
SWING = Oscillation Control
+ = Increase the thermostat temperature
- = Decrease the thermostat temperature
Temperature Setting
• 2 Heat Settings: 700W and 1500W. Turn the heating power knob to Ior II to select the 2 heat
settings.
• Turn thermostat temperature control to set the desired thermostat temperature.
• When the heating power knob is set to , the heater will only work as a fan with no heat.
• When the heating power knob is set to 0, the heater will be turned o.
NOTE: It’s always important to unplug the power after using the heater, or when unattended.
Safety device
This appliance has 2 protection devices.
• The rst device automatically disconnects and reconnects the appliance at a preset
temperature.
• The second safety device disconnects the appliance permanently in case of overheating, by
means of a thermal fuse. (It is not re-settable)
WARNING: NEVER COVER THIS HEATER!
Covering the heater will cause activation of the non re-settable safety fuse.
Operation of your Heater
Product brief introductions
PTC-903B table electric heaters feature novel style; reasonable structure;
graceful model; safety and reliability.
This product adopts the advanced PTC ceramic material as heating unit, the
electricity conversion rate is high; temperature rises quickly; releases heat
equally and make the indoors warm like in the spring. It’s a the most ideas
heater in the bedroom, study studio and reception room.
Componentsname
Electric principle graph
Technology parameter

Model: HT-703
Rated Voltage: 220-240VAC
Rated Frequency: 50Hz
Power: 1500W
Notices for safe usage
1. Reading the instructions before using.
2. Don’t use the outlet with other electric appliance altogether and
the outlet must can endure 10A or above current. Don’t lengthen
the power wire personally.
3. Don’t place the warmer under the fixed power outlet.
4. Never use the warm when the power wire, plug or the body is
damaged.
5. When user going out or not being used for a long time, have to
disconnect the plug from the power outlet.
6. Don’t cover anything on the heater and don’t use it nearby the
bed when going out or sleeping so as to avoid the pillow or sheets
covering the warm and take place the serious results.
7. When the warmer electrified, don’t touch it to avoid being scaled
by it, especially the children and old people should pay attentions
more.
8. Place the heater in the place the children can’t retouch when
using or storage.
9. When moving, cleaning and maintaining the warmer, have to
draw out the power plug firstly and waiting for the warmer cool
completely.
10. Never turn the “I” or “II” switch when the fan-motor can’t work
normally.
11. Don’t operate the warmer including switches, plugs and outlets
with wet hands so as not be shocked by electricity.
12. Don’t use the warmer in the bathroom or swimming pool.
13. Don’t dismantle the harmer personally when the troubles happen.
Please send it to our company or professional maintaining spots
to repair it.
Synchro Motor
Over-heat protector
Temp.
Heating unit
Heating unit
Motor
switch
Swing Switch

4
• There are no parts inside the heater that require your attention or servicing. Do not try to
open the outer case. By doing so you could damage the motor and heating element and
invalidate the warranty. If you have a problem with the heater, or if the power cord gets
damaged in any way, you MUST take the unit to a suitably qualied engineer or electrical
repair centre.
• Before cleaning the heater, please make sure it is disconnected from the power supply, and
has cooled down completely.
• When cleaning the heater, please make sure it is disconnected from the power supply, and
has cooled down completely.
• Never clean the heater with water and do not let it get wet under any circumstance.
• The outside case and be cleaned using a slightly damp lint-free cloth (a small amount of
detergent can be used if required).
• To remove any dust particles etc. from inside the front grill, or the rear air intakes, you can use
a regular vacuum cleaner.
• Always make sure the heater is completely dry before using.
• If you are not going to use the heater for a while it is best to make sure it is clean and dry and
then store it inside a plastic bag in a cool dry place.
• With sensible care and attention this heater will give you many years of good service and
economical heating.
Care & Cleaning Instructions