Gyroor C5Max User manual

C5Max

CONFIGURATION
1. Please check the tire pressure before riding,recommended tire
pressure 1.4 BAR.
2. Please check battery level before riding and full charged.
3. Please keep the original package one month at least.
4. Please charge once a month when not in use.
5. Please contact us directly if you need any help or experience
any problems.
6. Our after-sales support email [e-mail]. headlight
button
Brake handle Handlebar quick release
Speaker
LCD display
handlebar Throttle
Shifter

Head light
Pedal
Charge port Absorber
Forks
Disc
brake
Frame quick
release
Battery
keyhole
Backseat
Kickstand
Disc brake
Gear
Seat Tube quick release
Stem quick release
Stem clamp
Suspension
fork lock

E-bike
Charger
Manual
Seat
Folding pedal
Front fender
Tool
1
1
1
1
2
1
1 set
PACKING LIST

shifter and brake are attached to the handlebar
Eusure all the quick release and locking mechanisms are adjusted properly.
12. Quick release and locking mechanisms

The rear derailleur is operated by the right shifter.To operate
you must be pedaling forward.You

Operate Shifter
Control the two button to adjust the gears
from 1 to 7 or from 7 to 1.

CHARGING THE BATTERY
Builted in removeable battery. Please use manufacturer's original charger.
Charge Through the Charging Port
The charge port is on one side of the frame,please remove the dustproof plug then plug in the charger.
When full charged,the indicator of charger turn green.
Remove the Battery Then Charge
Open the lock catch of quick release and then open frame quick release.The keyhole is under the frame as
the picture, insert the key and turn clockwise one or two times,if does not work please turn clockwise
while pushing inward until the battery lock hiden in the frame.Then pull out the battery and plug in the
port to charge.
WARNING: Be sure to enable the battery lock after put the battery in frame again and then
close the quick release and lock catch.Other wise the frame will unfold and the battery will fall off.
charging
port frame quick
release lock catch
keyhole
battery lock

For video guide,please search on detail page on amazon.

Stem Installation
As picture 1,insert the upper part of the stem into the lower part.
Tips: please find the right position to install the stem.
As picture 2,close the stem locking;
as picture 3, close the lock catch;
as picture 4,open the stem quick release and loosen it to adjust the stem
height to a comfortable position, then tighten it and close the quick release.
Handlebar Installation
Open the handlebar quick release and loosen it then adjust the
handllebar to a suitable position, then tighten and close the
quick release.
Stem and Handlebar
WARNING: Minimum insertion mark must be hidden in the stem.
Do not attempt to raise the stem too high, as there is a risk of falling.
Must close the silicone lock after close the stem locking.
12 3 4

Seat
Loosen the seat post quick release then insert the seat tube and
adjust it to suitable height then tighten the quick release and close it.

Suspension Fork Lock
Cruise Function
Keep the same speed about 7 seconds enter into cruise mode, turn the throttle and
brake will cancel the cruise mode.
WARNING: Can not cancel the cruise mode until you turn the throttle and brake!
Open the suspension fork lock to enable shock absorption, close the suspension fork lock to disable
shock absorption. We advise you enable shock absorption on the uneven road surface.

4 5 6
8