H.Koenig WaterMop Gyro+ User manual

Instruction manual
Manuel d'utilisation
Gebruachsanweisung
Gebruiksaanwijzing
Manual de Usuario
Manuale d’uso
SWRC120
Robot Vacuum Cleaner
Aspirateur robot
Staubsaugerroboter
Robotstofzuiger
Robot aspirador
Robot Aspirapolvere

2
ENGLISH
SAFETY REGULATIONS
Before using this product, please read the following
safety instructions and follow all routine safety
precautions.
Please read the instructions carefully, please keep
these instructions.
Any operations inconsistent with this instructions
manual may cause damage to this product.
Note:
1. Only authorized technicians can disassemble this
product. Users are not recommended to disassemble
this product by themselves.
2. This product can only use the power adapter
provided by the factory. If other adapters are used,
the product may cause damage.
3. Do not touch wires, sockets or power adapters
when your hands are wet.
4. Take care to prevent fabric or body parts from
coming into contact with the product’s drive wheels.
5. Do not place this product near cigarette butts,
lighters and other smoldering fires.
6. Please clean the product after charging.
7. Do not bend wires excessively or place heavy
objects and sharp objects on the machine.
8. This product is an indoor household product. Do
not use it outdoors.
9. Do not sit on the product.
10. Do not use this product in a wet environment (e.g.

3
bathroom).
11. Before using this product, please remove all
vulnerable items (e.g. glasses, lamps, etc.) from the
ground as well as items (e.g. wires, paper sheets,
curtains) that may get stuck in the side brushes and
air suction passages.
12. Do not put this product in a place where it is easy
to fall (e.g. on desks and chairs).
13. Please carefully check whether the power adapter
is connected to the socket before using it, otherwise it
may cause battery damage.
14. To prevent tripping, please inform other people in
the house when the product is working.
15. Please empty the dust container before using this
product when the dust container is full.
16. The temperature for this product to be used in is 0
to 40 degrees Celsius.
17. Do not use this product in high temperature
environment.
18. Please remove the battery from the machine before
disposing of this machine.
19. Please make sure that this product is not powered
on when removing the battery.
20. Please recycle the discarded batteries safely
21. The supply cord cannot be replaced. If the cord is
damaged the charger should be discarded and
replaced. It must be replaced by the
manufacter, its service agent or a qualified technician
in order to avoid a hazard.
22. This appliance may be used by children of at least

4
8 years of age, as long as they are supervised and
have been given instructions about using the
appliance safely and are fully aware of the dangers
involved.
23. Cleaning and maintenance should not be carried
out by children unless they are at least 8 years of age
and are supervised by an adult.
24. Keep the appliance and its power cord out of reach
of children under 8 years of age.
25. When using electrical equipment, safety
precautions must always be taken to prevent the risk
of fire, electric shock and/or injury in the event of
misuse.
26. Make sure that the voltage rating on the typeplate
corresponds to your main voltage of your installation.
If this is not the case, contact the dealer and do not
connect the unit
27. The device must not be used if it has been
dropped, it obvious signs of damage are visible or if it
has leaks.
28. Please keep this document at hand and give it to
the future owner in case of transfer of your device
29. The charger must be removed from the socket
before removing the battery, cleaning or maintaining
the appliance

5
Warning:
1. Use only the original rechargeable battery and
charging seat specially equipped by the
manufacturer. Non -rechargeable batteries are strictly
prohibited, please refer to" product parameters" for
battery specification information.
2. Do not use product in an environment with open
flames or fragile objects.
3. Do not use product in extremely hot (above 40 ℃) or
extremely cold (below 0 ℃) environments.
4. Do not allow human hair, clothes, fingers and other
parts to come into contact with the opening and
operating parts of the product.
5. Do not use product on wet or ponding ground.
6. Do not allow product to collect any items such as
stones and waste paper, this may clog the product.
7. Do not allow product to collect any inflammable
substances, such as petrol, toner and pastels used for
printers or photocopies. Do not use the product to
clean areas with flammable items.
8. Do not allow product to collect any burning items,
such as cigarettes, matches, ashes and other articles
that may cause fire.
9. Do not place articles at the suction opening. Do not
use the
product when the suction port is blocked. Use a small
item such as dust, cotton wool, hair, etc. at the
suction opening to check that the suction air flow is
working.
10. Use the power cord carefully to avoid damage. Do

6
not use the power cord to drag or pull the product and
the product charging seat. Do not use the power cord
as a handle. Do not clamp the power cord in the
crack of the door. Do not pull the power cord around
corners. Do not allow the product to operate on the
power cord, the power cord should be far away from
the heat source.
11. Do not use a damaged charging seat.
12. Even if the product has been severely damaged,
burning of the product is prohibited, this may lead to
the explosion of the battery of the product.

PRODUCT COMPOSITION / PACKAGE CONTENTS
Robot Charging dock Water Tank
Side Brush x2 Dust Container Cleaning Brush
Adapter Mopping Pad HEPA filter
Instruction manual

PRODUCT COMPOSITION / PART NAME
Front Robot
Back Robot

Dust container
Charging dock
Water Tank and Mopping Pad Assembly
Water Injection Port
Water Tank
Mopping Pad

PRODUCT USAGE / PREPARATION
Remove Protection
Before using the Robot, remove the protective strip on the Robot and remove the protective film
on the charging dock.
Remove the protective strip
PRODUCT USE / ROBOT CHARGING
1. Placing and charging: The charging seat is against the wall and placed on a flat ground. Do
not place items within the range of 0.5m left and right and 1.5m ahead.
2. Connect to the power supply.
3. Installing side brushes: Install the side brushes according to the left and right (L/R).