H3C MSR3600-28-X1 User manual

2
1
H3C MSR3600-28-X1[28-X1-DP][51-X1][51-X1-DP] Routers Installation Quick Start-AP100
H3C MSR3600-28-X1[28-X1-DP][51-X1][51-X1-DP]路由器 快速安装指南-AP100
Accessories 安装附件介绍
Wear an ESD wrist strap. Make sure the strap makes good skin contact and is reliably grounded.
操作者需佩戴防静电腕带，确保防静电腕带与皮肤良好接触，并确认防静电腕带已经良好接地。
The installation tools are not provided with the device. Prepare them yourself as required.
设备不随机提供安装工具，请用户根据实际安装需求自己准备安装工具。 Mounting the device on a workbench 安装设备到工作台
Tool list 工具参考
!
Cage nut (user supplied)
浮动螺母(用户自备)
Grounding cable
地线
M6 screw (user supplied)
M6 机柜螺钉(用户自备)
Mounting brackets
挂耳
M4 screw
M4 挂耳螺钉
Flat-head screwdriver
一字螺丝刀
Phillips screwdriver
十字螺丝刀
Needle-nose pliers
尖嘴钳
Wire-stripping pliers
剥线钳
ESD wrist strap
防静电腕带
Diagonal pliers
斜口钳
Heat gun
热风枪
Network cable tester
测线仪 Multimeter
万用表
Marker
记号笔
Airflow design of the device 设备的风向设计
Power cord
电源线
Console cable
配置电缆
Rubber feet
脚垫
Baillatch
电源线卡钩
Mounting the device in a rack 安装设备到机柜
Install cage nuts 安装浮动螺母
1RU
Attach the mounting brackets to the device 安装挂耳到设备
ThisdocumentusestheMSR3600-28-X1-DProuterasanexample.
本手册仅以MSR3600-28-X1-DP为例进行介绍。
BOM:3104A0X1

3
Copyright © 2018, New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
Copyright © 2018 新华三技术有限公司 版权所有，保留一切权利
本文档中的信息如有更改，恕不另行通知
如需了解产品及安装方面的更多信息，请登录H3C网站 www.h3c.com
Connecting the power cord 连接电源线
Before connecting the power cord, make sure the device is reliably grounded.
To avoid bodily injury, connect the power cord to the device first and then to the power supply
system in the equipment room.
在连接电源线前，需保证设备已正确接地。
在连接电源线时，先完成电源线与设备侧的连接，再进行电源线与机房供电系统的连接，以免造成人
身伤害。
!
The device provides two AC power input receptacles for 1+1 redundancy.
双电源输入款型，提供电源1+1冗余备份。
Connecting optical fibers 连接光纤
Installing an interface module 安装接口模块
!SIC interface modules are not hot swappable.
本手册中涉及的款型均不支持热插拔SIC接口模块。
Connecting the grounding cable 连接地线
Correctly connecting the grounding cable is crucial to lightning protection and anti-interference.
Use the grounding cable provided with the device to ground the device reliably.
设备地线的正确连接是防雷、防干扰的重要保障，请使用设备随机提供的地线正确接地。
Mount the device in the rack 安装设备到机柜
1 2 3
12