Habitat Pandora 957/6092 User manual

Pandora
Spare Parts
www.argos-support.co.uk
Customer Support
[email protected]
0370 112 1928
0345 640 2020
Issue 3 - 11/09/21

Safety and Care Advice
Product Details
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
Sainsbury's Argos is a trading name of both: Argos Limited, Registered office: 489-499 Avebury Boulevard, Milton Keynes, United Kingdom,
MK9 2NW, registered number: 01081551 (England and Wales); and Sainsbury's Supermarkets Limited, Registered
office: 33 Holborn, London, EC1N 2HT, registered number: 03261722 (England and Wales). Both companies are subsidiaries of J Sainsbury's plc.
2
Important Ottoman Safety Warnings
Caution.This bed uses a pressurised mechanism.
Use caution when operating - Always use two hands at arm’s length, and only where illustrated on the
product.
You must ensure the mattress is on the bed frame before lifting the mechanism - Failure to do so may
result in injury.
Please ensure Children and pets are kept away from the bed when operating the bed mechanism.
If removing the mattress, make sure that the frame is secured as it could flip open.
Only use the storage compartment when when the frame is fully raised in the ‘up’ position.
No children or animals are left unattended when the frame is in the ‘up’ position.
Do not remain on the bed whilst the lifting mechanism is in use.
Beware of Entrapment - Keep both hands clear of mechanism when operating the mechanism.
When lifting the bed remove all bedding - Except the fitted sheet.
ENSURE MATTRESS IS ON
BEFORE LIFTING
DON'T LIFT WITHOUT MATTRESS
4’ Bed Pink 957/6092
4’ Bed Grey 963/0354
4’ Bed Blue 955/9545
4’6 Bed Blush pink velvet 363/2255
4’6 Bed Silver mist velvet 342/1662
4’6 Bed Blue 960/9701
Cleaning Guidance
Minor stains and spillages
should be removed immediately
from cushion fabric, by wiping
over lightly with a damp cloth
and mild soapy water.
Light marking can also be
removed using this method.
To remove more stubborn
stains or marking, a good
quality proprietary domestic
fabric cleaner can be used,
although it should first be
tested on and inconspicuous
area of the fabric.
5’ Bed Grey 962/3787

3
B
8x25mm Bolt x 208x45mm Bolt x 8
F
17mm Flat washer x 54
12mm Spring washer x 28
A
E
J
4x30mm Wood screw x 4
G
4x45mm Wood screw x 4
D
8x30mm Bolt x 26
C
Nut x 6
Fittings (Shown to scale)

1Side rail (Right) (4'/4'6-1930 × 300mm)
(5'-2030 × 300mm)
2Side rail (Left) (4'/4'6-1930 × 300mm)
(5'-2030 × 300mm)
3Headboard (4'-1315 × 995mm)
(4'6-1465 × 995mm)(5'-1615 × 995mm)
4Footboard (4'-1310 × 300mm)
(4'6-1460 × 300mm)(5'-1610 × 300mm)
5Hinge (x 1 pair)
NOTE: PISTON ATTACHED
6Foot x 4 (Ø3.5 x 15mm) 7Fabric base x 1(4'-1960 ×1270mm)
(4'6-1960 ×1420mm)(5'-2060 ×1570mm)
8Support Leg x 2 (25 × 205mm) 9Ottoman end frame (Headboard) x 1
(4'-1213 × 85mm)(4'6-1363 × 85mm)
(5'-1513 × 85mm)
NOTE:EXTRA HOLES
10 Ottoman end frame (Footboard) x 1
(4'-1213 × 85mm)(4'6-1363 × 85mm)
(5'-1513 × 85mm)
INSIDE
FRONT
INSIDE
INSIDE
11
12 Ottoman frame centre support x 1
(4'/4'6-1822 x 30mm)(5'-1922 x 30mm)
13
Ottoman frame (Sides) x 2
(4'/4'6-1822 x 30mm)(5'-1922 x 30mm)
Bentwood slats x 28 (4'-598 x 9 x 53mm)
Bentwood slats x 28 (4'6-675 x 9 x 53mm)
Bentwood slats x 30 (5'-750 x 9 x 53mm)
4
Parts

14 Double slat caps x 14 (4'-55mm)
Double slat caps x 14 (4'6-55mm)
Double slat caps x 15 (5'-55mm)
15 Stretcher x 1 (4'-1240 × 25mm)
Stretcher x 1 (4'6-1390 × 25mm)
Stretcher x 1 (5'-1540 × 25mm)
17 Mattress support
bracket x 2
18 Single slat caps x 28 (4'-55mm)
Single slat caps x 28 (4'6-55mm)
Single slat caps x 30 (5'-55mm)
16 Ottoman frame support x 1
(130 × 30mm)
5
Parts

Ruler/tape
measure
Allen key (Supplied)
Spanner (Supplied)
6
Phillips screwdriver
(small & medium)
Box spanner (Supplied)
Tools required

F
16
4
A
F
7
1
25mm Allen key x 18x45mm Bolt x 2
A
17mm Flat washer x 2
F
G
F
C
3
4
8x30mm Bolt x 16
C
17mm Flat washer x 16
F
12mm Spring washer x 16
G
G
F
C
Leave screws loose
Ensure surface is protected
to avoid marking.
B
8x25mm Bolt x 208x45mm Bolt x 8
F
17mm Flat washer x 54
12mm Spring washer x 28
A
E
J
4x30mm Wood screw x 4
G
4x45mm Wood screw x 4
D
8x30mm Bolt x 26
C
Nut x 6
16
A

8
3
4
5mm Allen key x 1
J
4x45mm Wood screw x 4
D
D
1
15
1
2
15
Do not fully tighten fixings!
31
C
3
4
1
2
Holes at
headboard end
Turn
Product

6
J
9
5
6J
4x30mm Wood screw x 4
J
Turn
Product
Velcro fastening
7
J
6

C
F
8
12
F
B
10
7
8
Turn
Product
5mm Allen key x 18x30mm Bolt x 10
C
17mm Flat washer x 10
F
8x25mm Bolt x 4
B
17mm Flat washer x 4
F
5mm Allen key x 1
Shown upside down
Beware of risk of entrapment
from folding hinges!
5
51
2
CF
Holes on underside
1