Halma Alicat CODA User manual

Download the full manual: alicat.com/coda
Troubleshooting • Questions:
[phone] • [e-mail] • Live web chat at alicat.com
CODA Touchscreen Interface
Quick Start Guide: Controllers
A
A
C
Process Connection
Data Connection
USB Type-A to USB-C
Display Power Connection
USB Type Micro-A
1.4 W, 9–30 Vdc
Power and
Communication
Connection
DB-15
40–10,000 g/h:
4 W, 9–30 Vdc
30,000–100,000 g/h:
5 W, 9–30 Vdc
Density: 997.04 kg/m kg/h
+0.000
EDIT
°C
+27.52 -0.00
T:g T:sec
+0.00
SETPT RESET TOTALIZER TARE SETUP

Use a Micro-USB cable to connect
power to the display, and wait for
the device to initialize. You may see
a “device not found” error, which
is not a problem at this point.
2
Connect a USB-A to USB-C
cable between the display
and the controller or meter.
3
Connect power to the
controller via DB-15 cable.

Download the full manual: alicat.com/coda
Troubleshooting • Questions:
[phone] • inf[email protected] • Live web chat at alicat.com
CODA Touchscreen Interface
Quick Start Guide: Meters

Use a Micro-USB cable to connect
power to the display, and wait for
the device to initialize. You may see
a “device not found” error, which
is not a problem at this point.
2
Connect a USB-A to USB-C
cable between the display
and the controller or meter.
DOC-MANUAL-CD-QUICK
Rev   2021-08-04
A
OPTIONAL:
Power (when supplied)
and Communication
Connection
DB-15
40–10,000 g/h:
4 W, 9–30 Vdc
30,000–100,000 g/h:
5 W, 9–30 Vdc
A
C
Process Connection
Data and Power Connection
USB Type-A to USB-C
Display Power Connection
USB Type Micro-A
1.4 W, 9–30 Vdc
Density: 997.04 kg/m kg/h
+0.000
°C
+27.52 +0.00
T:g T:sec
+0.00
RESET
TOTALIZER TARE SETUP