Halsey Taylor 7020 User manual

96471C (Rev. F - 7/10)
7020 / 7030 FOUNTAIN
PAGE1
HalseyTaylorFountainsareamongtheeasiesttoinstallFountainsonthemarket
today.Toassureyouinstallthesemodelseasilyandcorrectly,PLEASEREADTHESE
SIMPLEINSTRUCTIONSBEFORESTARTINGTHEINSTALLATION.CHECKYOUR
INSTALLATIONFORCOMPLIANCEWITHPLUMBING,ELECTRICAL,ANDOTHER
APPLICABLECODES.Afterinstallation,leavetheseinstructionswiththeFountain
forfuturereference.
HalseyTaylorOwnersManual
Model 7020 and 7030 (Two and Three Station Fountains)
IMPORTANT
INSTALLATION INSTRUCTIONS
1. Familiarizeyourselfwiththecomponentsofthedrinkingfountain.
2.Determinelocationofrough-inandplumbingconnections.Mounthangerbracket(s)towallatdesiredheight.
3.Installfountaintowall.Installadditionalfasteners toboltfountainsecurelytowall.
4.Connectstrainertowatersupply(servicestop).Refertofigure5.DONOTSOLDERTUBESINSERTEDINTOTHESTRAINERAS
DAMAGETOTHEO-RINGSMAYRESULT.Connecttraptowastestubandfountain.
5.Turnonwatersupplyand check forleaksatallplumbingand drainconnections.Fixallleaksas required.
ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON
7020 TWO STATION FOUNTAIN
7030 THREE STATION FOUNTAIN
IMPORTANT! INSTALLER PLEASE NOTE.
THE GROUNDING OF ELECTRICALEQUIPMENT SUCHAS TELEPHONE, COMPUTERS, ETC. TO WATER LINES IS A
COMMON PROCEDURE. THIS GROUNDING MAY BE INTHE BUILDING OR MAY OCCURAWAY FROM THE BUILDING.
THIS GROUNDING CAN CAUSE ELECTRICALFEEDBACK INTOAFOUNTAIN, CREATINGAN ELECTROLYSIS WHICH
CAUSESAMETALLIC TASTE ORAN INCREASE INTHE METALCONTENT OFTHEWATER.THISCONDITIONIS
AVOIDABLE BYUSING THE PROPERMATERIALSASINDICATED.ANYDRAINFITTINGSPROVIDEDBYTHE INSTALLER
SHOULDBEMADEOFPLASTIC TOELECTRICALLYISOLATETHE FOUNTAIN FROMTHEBUILDING PLUMBING SYSTEM.
INSTALLER

96471C (Rev. F - 7/10)
7020 / 7030 FOUNTAIN
PAGE2
ROUGH - IN DIMENSIONS
MODEL 7020 (TWO STATION)
FIG. 1
ROUGH - IN DIMENSIONS
MODEL 7030 (THREE STATION)
FIG. 2

96471C (Rev. F - 7/10)
7020 / 7030 FOUNTAIN
PAGE3
HOW TO ATTACH COVER PLATE
STEP 1.
POSITION WELD NUTSAND SCREWSAS SHOWN IN THEABOVE PICTURE.
STEP 2.
POSITIONPLATETOBOTTOMOF FOUNTAINKEEPING EQUALMARGIN ON EACHSIDE.
STEP 3.
TIGHTEN SCREWS -AS SCREWSARE DRAWN UP THE WING OFTHE WELD NUT WILL
SANDWICH THE FLANGE OF THE FOUNTAIN.
APRONOFFOUNTAIN
24
22
23

96471C (Rev. F - 7/10)
7020 / 7030 FOUNTAIN
PAGE4
15
9
17
16
2
6
4
3
8
10,11
14 13
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
NS
ITEMNO. PARTNO. DESCRIPTION
45703C
10031C
40048C
40089C
40322C
45675C
60291C
61313C
45852C
45336C
50074C
15009C
45853C
55001009
55996C
56092C
70682C
45854C
45855C
-----
-----
28332C
75701C
75700C
28580C
Bubbler Assy.
RetainingNut
Button
Cover
Orifice Assy.
Bubbler Body
Screen
Regulator
Trap Assy.
Stainer/Ferrule Assy.
Gasket - Tailpipe
Nipple
Wasteline Tee Assy.
Fountain
Strainer
Polytubing
Tee - 1/4
Tailpipe
Wasteline (J-Tube)
-----
-----
BottomCover Plate
Machine Screw 1/4-20X1/2
Weld Nut 1/4-20 x 1 1/4 Long
Hanger Bracket
ITEMIZEDPARTSLIST
10,11
FIG. 5 FIG. 6
NOTE: WATER FLOW
DIRECTION
BUILDINGWATER INLET
SERVICESTOP
(NOT FURNISHED)
1/4"O.D.TUBE
WATER INLET
TOCOOLER
3/8"O.D.UNPLATED
COPPERTUBE CONNECT
COLDWATER SUPPLY
1 - SEE FIG. 3
7
1
FIG. 3
FIG. 4
18
19
12 12

96471C (Rev. F - 7/10)
7020 / 7030 FOUNTAIN
PAGE5
FORPARTS,CONTACTYOURLOCALDISTRIBUTORORVISITOURWEBSITE-WWW.HALSEYTAYLOR.COM
PRINTEDINU.S.A.
2222CAMDENCOURT
OAKBROOK,IL60523
630.574.3500
FIG. 7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
NS
ITEMNO. PART NO. DESCRIPTION
45703C
10031C
40048C
40089C
40322C
45675C
60291C
61313C
45852C
45336C
50074C
15009C
45853C
55001010
55996C
56092C
70682C
45854C
45856C
45330C
45858C
28333C
75701C
75700C
28580C
Bubbler Assy.
RetainingNut
Button
Cover
Orifice Assy.
Bubbler Body
Screen
Regulator
Trap Assy.
Strainer/Ferrule Assy.
Gasket - Tailpipe
Nipple
Wasteline Tee Assy. (Vertical)
Fountain
Strainer
Polytubing
Tee - 1/4
Tailpipe
Wasteline Tee Assy. (Horizontal)
Wasteline (J-Tube)
Wasteline (Straight)
BottomCover Plate
Machine Screw 1/4-20 x 1/2
Weld Nut 1/4-20 x 1 1/4 Long
Hanger Bracket
ITEMIZEDPARTSLIST TROUBLE SHOOTING ANDMAINTENANCE
Orifice Assy: Mineral deposits on orifice can cause water flow to spurt or not
regulate. Mineral deposits may be removed from the orifice with a small round file
or small diameter wire. CAUTION: DO NOT FILE OR CUT ORIFICE MATERIAL.
Stream Regulator: If orifice is clean, regulate flow as in "STREAM HEIGHT
ADJUSTMENT" instructions below. If replacement is necessary, see parts list for
correct regulator part number.
Actuation of Quick Connect Water Fittings: Cooler is provided with lead-free
connectors which utilize an o-ring water seal. To remove tubing from the fitting,
relieve water pressure, push in on the gray collar while pulling on the tubing (see
figure 6).
Stream Height: Stream height is factory set a 45-50 PSI. If supply pressure
varies greatly from this, remove items 3 and 4 (see figure 3) and adjust screw on
item 8. Clockwise adjustment will raise stream and counter-clockwise adjustment
will lower stream. For best adjustment, stream should hit basin approx. 6-1/2"
from bubbler.
10,11
10,11 1 - SEE FIG. 3
14
13
10,11
FIG. 8
9
17
16
17
15
16
18
19 21
20 18
12 12
12