
5
5. Troubleshooting
Error Solution
A connected end device will not
charge.
Check whether your end device
requires a charger with a special
pin assignment and whether the
charging current of the charger is
sucient. This information can be
found in the manual for your end
device, or you may contact the
manufacturer’s customer service
department.
The charger becomes extremely
hot and switches off the charging
process after a period of time.
Your end device requires a
higher charging current than the
charger can provide. The charger
automatically switches off the
charging process to prevent damage
to the charger.
6. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or
from failure to observe the operating instructions and/or safety notes.
7. Service and Support
Please contact Hama Product Consulting if you have any questions about this
product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com