
7
•Do not modify the product in any way.Doing so voids the warranty.
•Do not continue to operate the product if it is visibly damaged.
•Use the product only for the intended purpose.
•Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
•Only use the article under moderate climatic conditions.
•As with allelectrical products, this device should be kept out of the reach of children.
•Do not use the product in adamp environment and avoid splashing water.
•Do not bend or crush the cable.
•Never apply force when using the product or during installation.
•When using this product, observe the applicable local traclaws and regulations.
•Take carethat components such as airbags, safety areas, controls, instruments, etc. and visibility arenot
blocked or restricted.
•Ensurethat the product is securely mounted beforeevery journey.
•Do not allow yourself to be distracted by the product when driving avehicle. Always pay attention to the
surrounding tracand your environment.
•Always pull directly on the plug when disconnecting the cable, never on the cable itself.
Warning -magnets
•People with pacemakers should keep away from the magnets. The magnets can negatively affect the
function of the pacemaker.
•Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the
product. The data on the cards could be damaged or completely deleted
Warning
Ensurethat thereare no metal parts (e.g. metal plate for magnetic holders) on the back of your device.
Metal heats up signicantly in the eld of an induction charger and can damage your device and/or the
charger.
Risk of electric shock
•Do not open the device or continue to operate it if it becomes damaged.
•Do not use the product if the charging cable, adapter cable or power cable is damaged.
•Do not attempt to service or repair the product yourself.Leave any and all service work to qualied
experts.
4. Start-up and operation
Note
•Please be awarethat this wireless car charger is only suitable for Apple smartphones of the latest
generation that support magnetic, wireless
charging.
•Note that mobile phone cases, covers, etc., and other materials between the wireless charger and the
back of your device may interferewith or even prevent the charging process.
Note -12V,24Vvehicle electrical systems
The charger is suitable for 12 Vand 24 Vvehicle electrical systems.
•Attach the wireless car charger using the grating holder included (A4) to the grating in your car by
introducing the holder pin (B1) into the grating and locking it in place with the locking screw (B2). With
rounded gratings, please use the retaining plate supplied (B3). The grating holder (A4) is suitable for
gratings between 15 mm and 35 mm wide.