HAMPTON BAY BANNERET YG730-MWH User manual

THANK YOU
USE AND CARE GUIDE
52 IN BANNERET
INDOOR CEILING FAN
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this ceiling fan. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for
your home improvement needs. Thank you for choosing Hampton Bay!
1-855-HD-HAMPTON
HAMPTONBAY.COM
Questions, problems, missing parts? Before returning to the store,
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday
call Hampton Bay Customer Service
Visual instruction of how to install this fan:
Visit www.homedepot.com and enter either the Item or Model number to nd
this fan and click the link of visual instruction in the product overview section.
Item #1008 649 320
Model #YG730-MWH

2
READ AND SAVE THESE INSTRUCTIONS
Table of Contents ..................................
Safety Information .................................
Warranty .........................................
Pre-installation ....................................
Installation .......................................
Assembly ........................................
Operation ........................................
Care and Cleaning .................................
Troubleshooting ...................................
2
2
3
3
6
7
14
15
15
Safety Information
To reduce the risk of electric shock, ensure electricity has been
turned off at the circuit breaker or fuse box before beginning.
All wiring must be in accordance with the National Electrical
Code “ANSI/NFPA 70” and local electrical codes. Electrical
installation should be performed by a qualied licensed
electrician.
The outlet box and support structure must be securely mounted
and capable of reliably supporting a minimum of 35 lb (15.9 kg)
or less. Use only UL-Listed outlet boxes marked “FOR FAN
SUPPORT.”
The fan must be mounted with a minimum of 7 ft (2.1 m)
clearance from the trailing edge of the blades to the oor.
Avoid placing objects in the path of the blades.
To avoid personal injury or damage to the fan and other items,
be cautious when working around or cleaning the fan.
Do not use water or detergents when cleaning the fan or fan
blades. A dry dust cloth or lightly dampened cloth will be
suitable for most cleaning.
After making electrical connections, spliced conductors should
be turned upward and pushed carefully up into the outlet box.
The wires should be spread apart with the grounded conductor
and the equipment-grounding conductor on one side of the
outlet box and ungrounded conductor on the other side of the
outlet box.
All set screws must be checked and retightened where
necessary before installation.
1.
2.
3.
4.
5.
6.
7.
8.
9.
The following responsible party designated in FCC §2.909 is
responsible for this declaration:
Model Number: YG730-MWH
Company Name: TAL INTERNATIONAL CORPORATION
Company Address: 2919 E. Philadelphia St., Ontario, CA 91761, U.S.A.
Telephone Number: [phone] Fax: [phone]
WARNING: To reduce the risk of personal injury, do not bend
the blade arms (also referred to as anges), when installing
the brackets, balancing the blades or cleaning the fan.
WARNING: Do not insert foreign objects between rotating
fan blades.
WARNING: To reduce the risk of re, electric shock or
personal injury, mount the fan to an outlet box marked
acceptable for fan support with the screws provided with the
outlet box.
CAUTION: To reduce the risk of personal injury, use only
the screws provided with the outlet box.
WARNING: To reduce the risk of electric shock, this fan
must be installed with an isolating wall control/switch.
Table of Contents

3HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
SPECIFICATIONS
TOOLS REQUIRED
NOTE: These are approximate measures. They do not
include amps and wattage used by the light kit.
Warranty
Pre-InstallationPre-Installation
52 in.
Low
Medium
High
120
Fan size Watts RPM CFMSpeed Volts Amps N.W.
0.22
0.38
0.5
11.61
33.6
60.5
63
118
160
1694
3288
4524
10.8 kg
(23.76 lbs.)
Phillips
screwdriver
Flat blade
screwdriver
Step
ladder
Wire
stripper
Electrical
tape
Adjustable
wrench
The manufacturer warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the
factory for a period of lifetime after the date of purchase by the original purchaser. The manufacturer warrants the light kit (excluding any
glass), to be free from defects in workmanship and material at the time of shipment from the factory for a period of three years after the
date of purchase by the original purchaser. The manufacturers also warrants that all other fan parts, excluding any glass or acrylic blades,
to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of
purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or
superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All
costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident, misuse, improper
installation or by afxing any accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not
cover any changes in brass nish, including rusting, pitting, corroding, tarnishing or peeling. Brass nishes of this type give the longest
useful life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a
defect. Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. We hereby
disclaim any and all warranties, including but not limited to those of merchantability and tness for a particular purpose to the extent
permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specied in the
express warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to
you. The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or
performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential
damages, so the above exclusion or limitation may not apply to you. This warranty gives specic legal rights, and you may also have other
rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a
claim on the warranty must be paid by the customer.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.

4
AA
BB
CC
DD
Plastic wire nut
Blade attachment screw and ber washer
9 Watt LED medium base bulb
Pull chain and fob
Part Description
3
16
2
2
Quantity
Pre-Installation (continued)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC DD

5
PACKAGE CONTENTS
Part
E
F
G
H
Description
Blade
Light kit mounting plate
Light kit
Glass shade
Pre-Installation (continued)
Part
A
B
C
D
Quantity
1
1
1
5
Quantity
5
1
1
1
Description
Mounting bracket
Fan motor assembly
Canopy ring
Blade arm
A
B
C
F
G
H
E
D
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

6
To hang your fan where there is an existing xture but no ceiling
joist, you may need an installation hanger bar (not included) as
shown above.
If your ceiling fan does not have an existing UL-listed mounting
box, then install one using the following instructions:
□Disconnect the power by removing the fuses or turning off
the circuit breakers.
□Secure the outlet box (not included) directly to the
building structure. Use appropriate fasteners and materials
(not included). The outlet box and its bracing must be able
to fully support the weight of the moving fan (at least 35
lbs.). Do not use a plastic outlet box.
The illustrations below show two different ways to mount the
outlet box (not included).
WARNING: To reduce the risk of re, electric shock, or
personal injury, mount the fan to an outlet box marked
acceptable for fan support using the screws provided with the
outlet box. An outlet box commonly used for the support of
lighting xtures may not be acceptable for fan support and
may need to be replaced. If in doubt, consult a qualied
electrician.
Outlet Box
Outlet Box
Hanger Bar
Outlet Box
Installation
MOUNTING OPTIONS

7
Assembly — Hanging the Fan
1Installing the mounting bracket
to the electrical box
Hanging the fan to the mounting
bracket
□Attach the mounting bracket (A) to the outlet box (not
included) with two screws and washers provided with
the outlet box (II). Ensure the mounting bracket (A) is
tight and secured.
WARNING: To reduce the risk of re, electric shock or
other personal injury, mount the fan only to an outlet box or
supporting system marked acceptable for fan support and
use the mounting screws provided with the outlet box.
□Lift the fan into position by hanging the fan motor
assembly (B) onto the hook from the ceiling mounting
bracket (A) allowing it to hang freely.
A
Outlet Box
A
B
2
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Green
AA
NeutralHot
Black
Ground
conductor
White
A
Blue
Black White
8
Making the electrical connections
WARNING: Check to see that all connections are tight,
including ground, and that no bare wire is visible at the wire
nuts (except for the ground wire).
WARNING: To reduce the risk of re or electric shock, do
not use this fan with any solid-state speed control device.
WARNING: To avoid possible electrical shock, be sure
electricity is turned off at the main fuse box before wiring.
Assembly — Hanging the Fan (continued)
3a
If you feel you do not have enough electrical wiring knowledge
or experience, have your fan installed by a
licensed electrician.
Follow the steps below to connect the fan to your household
wiring. Use the plastic wire nuts (AA) with your fan. Secure the
plastic wire nuts (AA) with electrical tape. Make sure there are
no loose strands or connections.
□Make wire connections as follows, using the wire nuts
(AA).
From Fan To Outlet Box
Black + Blue Wires ---------- Black Wire (Hot)
White Wire ------------------- White Wire (Neutral)
From Mounting plate To Outlet Box
Green Wire-------------------- Green or Bare Wire (Ground)
□Turn the wires upward and push them carefully back
through the mounting bracket into the outlet box. Spread
the wires apart, with the green (ground) and white wires
will be on one side of the outlet box and the black and
blue wires will be on the other side. Make sure that the
wires are still attached to the wire nuts.
Outlet Box

9
Assembly — Hanging the Fan (optional)
3b Single switch connections 3c Dual switch connections
□On a single switch the fan and light can be turned on or
off together. Make wire connections as follows, using the
wire nuts (AA). Wall switch not included.
From Fan To Outlet Box
Black + Blue Wires ---------- Black Wire (Hot)
White Wire ------------------- White Wire (Neutral)
From Mounting plate To Outlet Box
Green Wire ------------------- Green or Bare Wire (Ground)
On a dual switch the fan and light can be turned on or off
separately. Make wire connections as follows, using the
wire nuts (AA). Wall switch not included.
From Fan To Outlet Box
Black Wire (for Fan) --------- Black Wire (Hot #1)
Blue Wire (for Light) --------- Red Wire (Hot#2 but maybe be
in another color other than
black, white or green)
White Wire ------------------- White Wire (Neutral)
From Mounting plate To Outlet Box
Green Wire ------------------ Green or Bare Wire (Ground)
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Ground
conductor
AA
SINGLE SWITCH
Neutral
AC IN
Black
White
Blue
Black
White
Green
A
Outlet Box
AA
Neutral
Ground
conductor
White
AC IN
Black
Red
DUAL SWITCH
A
Blue
Black
White
Green
Outlet Box

10
Attaching the fan motor assembly
to the mounting bracket
4 5 Tightening screws and attaching
the canopy ring
□Loosen two of the four mounting bracket screws (EE)
from the mounting bracket (A), and remove the other
two screws (EE).
□Remove the fan motor assembly (B) from the mounting
bracket (A) hook, and engage the key holes with the two
mounting bracket screws (EE) previously loosened.
□Install the two mounting bracket screws (EE)
previously removed, and tighten all four mounting
bracket screws (EE).
□Raise the canopy ring (C) up against the mounting
bracket (A). The four supports inside the fan motor
assembly (B) should be placed against the four studs
on the mounting bracket (A). Twist the canopy ring (C)
clockwise until snug.
Assembly — Hanging the Fan (continued)
C
B
A
EE
A
B
EE
EE

11
Assembly — Attaching the Fan Blades
6Attaching the blades to the blade
arms 7
BB
E
D
□Attach the blades (E) to the blade arms (D) using the
three blade attachment screws and ber washers
(BB). Start a screw and ber washer (BB) into the
blade arm (D), but do not tighten.
□Repeat for the two remaining blade attachment
screws and ber washers (BB).
□Tighten each screw securely starting with the center
screw. Make sure the blade (E) is straight.
□Repeat these steps for the remaining blades (E).
Fastening the blade assemblies to
the motor
WARNING: To reduce the risk of personal injury, do not
bend the blade arms (D) while installing, balancing the blades
(E), or cleaning the fan. Do not insert foreign objects between
rotating fan blades (E).
□The fan motor assembly (B) is shipped with rubber
packing mounts (FF) to prevent movement during
transportation. Remove the ve rubber packing
mounts (FF) from the fan motor assembly (B) and
discard prior to attaching the blade arms (D).
□Fasten the blade assemblies to the fan motor
assembly (B) by lining up the slots (GG) of the motor
with the tabs (HH) on the blade arms.
□Tighten the two blade arm screws with lock washers
(II) already installed in the blade arms (D).
□Repeat this procedure for the remaining blade arms
(D).
B
E
D
FF
GG
II
HH
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

12
8Attaching the light kit mounting
plate to the mounting ring
□Remove one of the three light kit mounting plate
screws (JJ) from the mounting ring (KK) and loosen
the other two screws (JJ). (Do not remove)
□Place the key holes in the light kit mounting plate (F)
over the two screws (JJ) previously loosened from
the mounting ring (KK), and turn the light kit mounting
plate (F) until the light kit mounting plate (F) locks in
place at the narrow section of the key holes.
□Securely tighten the two light kit mounting plate
screws (JJ) previously loosened and the one (JJ)
previously removed.
B
JJ
F
KK
CAUTION: Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufcient to prevent electric shock.
Assembly — Installing the Light Kit
9Attaching the light kit to the light kit
mounting plate
□While holding the light kit (G) under the fan, snap
together the wire connection plugs (LL).
□Carefully push all wires back into the light kit mounting
plate (F). Install the light kit (G) onto the light kit
mounting plate (F) with the three light kit mounting
screws (MM) provided. Be sure to tighten all screws.
F
MM
G
LL
B

13
10 Installing the light bulbs and
glass shade
Assembly — Installing the Light Kit (continued)
CAUTION: Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufcient to prevent electric shock.
□Install the 9W LED bulb (CC) (included).
□Position the notches (NN) in the outer rim of the glass
shade (H) so they line up with the tabs (OO) on the
inside of the rim on the light kit (G). Carefully lift the
glass (H) up inside the light kit (G) and secure it to the
fan by turning the glass shade (H) clockwise until
snug. DO NOT OVERTIGHTEN.
B
H
CC
G
OO
NN
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

14
Operation
PULL CHAIN OPERATING INSTRUCTIONS
Install two pull chains and fobs (DD) onto the pull chains located in
the light kit (G). Turn on the power and check the operation of the
fan.
The pull chain controls the fan speed as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low, and 4 pulls - Off.
Speed settings for warm or cool weather depend on factors such
as the room size, ceiling height, and numbers of fans.
To turn the light kit on or off, pull the chain that is attached to
the light kit (G).
DD
G
NOTE: Wait for the fan to stop before reversing the direction
of the blade rotation.
The reverse switch is located on the surface of the switch housing.
Slide the switch to the left for warm weather operation. Slide the
switch to the right for cool weather operation.
Warm weather - (Counterclockwise Direction) A downward air ow
creates a cooling effect. This allows you to set your air conditioner
on a warmer setting without affecting your comfort.
Cool weather - (Clockwise Direction) An upward air ow moves
warm air off the ceiling. This allows you to set your heating unit on
a cooler setting without affecting your comfort.
REVERSE SWITCH OPERATING INSTRUCTIONS
Reverse switch

15
Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. Because of the fan’s
natural movement, some connections may become loose over time. It is not necessary to remove the fan from the ceiling.
Clean your fan periodically. Use only a soft brush or lint-free cloth to avoid scratching the nish. The plating is sealed with a lacquer to
minimize discoloration or tarnishing.
(Optional) Apply a light coat of furniture polish to the wood blades.
(Optional) Cover small scratches with a light application of shoe polish.
Do
Care and Cleaning
Use water when cleaning. Water could damage the motor, or the wood, or possibly cause an electrical shock.
Apply oil to your fan or motor. The motor has permanently-lubricated sealed ball bearings.
Do not
Troubleshooting
Problem Solution
Check the main and branch circuit fuses or breakers.
Check the line wire connections to the fan and switch wire connections in the switch housing.
Make sure all motor housing screws are snug.
Make sure the screws that attach the fan blade to the motor hub are tight.
Make sure the wire nut connections are not rattling against each other or the interior wall of the switch
housing.
Allow a 24-hour "breaking-in" period. Most noises associated with a new fan disappear during this time.
If using the ceiling light kit, make sure the glassware is secured tightly.
Make sure there is a short distance from the ceiling to the canopy. It should not touch the ceiling.
Make sure your ceiling box is secure and that rubber isolator pads are used between the mounting bracket
and outlet box.
Verify that all blades and blade bracket screws are secure (most fan wobble problems are caused by
loose parts). Once the fan is properly installed, run the ceiling fan for 10 minutes to let the fan self-adjust.
If wobble occurs after running the fan for 10 minutes, verify blade level using the following process:
- Select a point on the ceiling above the tip of one of the blades, then select any fan blade and measure
from the center of the selected blade to the point on the ceiling. Rotate the fan until the next blade is
positioned and repeat the measurement using the same point from the ceiling for every blade.
Measurement deviations should be within 1/8 in.
- If all deviations are less than 1/8 in. and the fan continues to wobble, please call Customer Service
(1-855-HD-HAMPTON) to order a complimentary blade balancing kit.
- If deviation is greater than 1/8 in., please call Customer Service (1-855-HD-HAMPTON) to order complimentary
replacements of your brackets.
The fan will not start.
The fan sounds noisy.
The fan wobbles.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.