HAMPTON BAY LAUREL OAKS MOTION User manual

THANK YOU
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
LAUREL OAKS MOTION DINING CHAIR
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday,
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item # 1002 582 416
Model # 720.140.003
chair.

2
Table of Contents
Table of Contents ...................................2
Safety Information ..................................2
Warranty ..........................................2
What is covered ...................................2
What is not covered ................................2
Pre-Assembly ......................................3
Planning Assembly.................................3
Hardware Included.................................3
Chair Package Contents .............................4
Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Care and Cleaning ..................................6
Safety Information
CAUTION: Read all of the instructions in this manual
before you begin assembly. Failure to do so may result in
faulty assembly and potential injury!
Warranty
2 YEAR WARRANTY
WHAT IS COVERED
We warrant the product to be free of manufacturing defects to the original purchaser for two years.
WHAT IS NOTCOVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, freezing, or abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact Customer Care at 1-855-HD-HAMPTON or visit www.hamptonbay.com.

3
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
Please read this entire instruction manual prior to assembly.
Identify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a non-abrasive surface
to avoid scratching.
NOTE: More than one person may be required to assemble
this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part DescriptionQuantity
AA M8x40 Bolt 4
BB M6x20 Bolt 10
CC 4
10
EE Spring washer 4
FF Nut 4
GG Bolt cap for nut 8
CC EE FF GG HH
JJ KK LL
Washer for M8 bolt
DD Washer for M6 bolt
AA DD BB II
HH Bolt cap for bolt AA
Bolt cap for bolt BB
8
JJ Hex wrench 2
II 10
KK 2Metal plate
LL 1Allen driver

4
Pre-Assembly
CHAIR PACKAGE CONTENTS
IMPORTANT: Do not fully tighten bolts/screws until all pieces are loosely assembled.
Part DescriptionQuantity
A Chair back 1
B Right arm 1
C Left arm 1
H
B
A
C
D
F
E
G
D Chair seat 1
E T- rock 1
F Chair base 1
G Seat cushion 1
H Back cushion 1

DD
E
F
5
Assembly
1 Attach the T-rock to the seat
ƑAttach the T-rock (E) to the chair seat (D) using M8 bolts
(AA), metal plate (KK), washers (CC and EE), and nuts (FF).
3Attach the chair back to the chair seat
ƑAttach the chair back (A) to the chair seat (D) using M6 bolts
(BB) and washers (DD).
2 Attach the seat to the chair base
ƑAttach the seat (D) to the chair base (F).
GG GG
HH
FF
CC
EE
KK
HH
JJ
AA
D
A
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (JJ) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Add the
DDBB LL
II
GG HH

6Add cushions
ƑAdd seat cushion (G) and back cushion (H).
B
C
A
A
H
G
6
Assembly
4 Attach the right arm to the chair seat
and back
ƑAttach the right arm (B) to the chair seat (D) and chairt back
(A) using M6 bolts (BB) and washers (DD).
5
Ƒ
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (LL) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Add the
BB
BB
DD
DD
II
II
BB
BB
DD
DD
II
II
(II)
Attach the left arm to the chair seat
and back
Attach the right arm (B) to the chair seat (D) and chairt back
(A) using M6 bolts (BB) and washers (DD).

7
Care and Cleaning
ƑDo not allow water to build up in the frames. This will cause corrosion and possible freezing damage in cold climates.
ƑUse a mild soap and water for normal cleaning. Do not use janitorial or alcohol based cleaners. Some cleaners may be marked as
.
ƑRinse with clean water and dry with a soft, absorbent cloth towel.
ƑTreat the frames with a liquid wax for maximum protection against UV rays and/or salty, damp air.

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m.-7 p.m., EST, Monday-Friday,
9 a.m.-6 p.m., EST, Sauturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.

THANK YOU
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
LAUREL OAK STATIONARY DINNING CHAIR
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday,
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item # XXX XXX
Model # 720.127.000

2
Table of Contents
Table of Contents ...................................2
Safety Information ..................................2
Warranty ..........................................2
What is covered ...................................2
What is not covered ................................2
Pre-Assembly ......................................3
Planning Assembly.................................3
Hardware Included.................................3
Table Package Contents.............................4
Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Care and Cleaning ..................................6
Safety Information
CAUTION: Read all of the instructions in this manual
before you begin assembly. Failure to do so may result in
faulty assembly and potential injury!
Warranty
2 YEAR WARRANTY
WHAT IS COVERED
We warrant the product to be free of manufacturing defects to the original purchaser for two years.
WHAT IS NOTCOVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, freezing, or abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact Customer Care at 1-855-HD-HAMPTON or visit www.hamptonbay.com.

3
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
Please read this entire instruction manual prior to assembly.
Identify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a non-abrasive surface
to avoid scratching.
NOTE: More than one person may be required to assemble
this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part DescriptionQuantity
AA M8x20 Bolt 10
BB
CC
Washer
10
10
DD
Bolt cap
1
Hex Wrench
BB CC DD
AA

4
Pre-Assembly
CHAIR PACKAGE CONTENTS
IMPORTANT: Do not fully tighten bolts/screws until all pieces are loosely assembled.
Part DescriptionQuantity
A Chair back 1
B Left arm
Right arm
1
C1
D Chair seat 1
E Seat cushion
Back cushion
1
F1
E
C
F
D
A
B

E
D
D
D
C
B
F
A
A
5
Assembly
1 Attach the chair back to the chair seat
ƑAttach the chair back (A) to the chair seat (D) using M6 bolts
(AA) and washers (BB).
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (EE) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Adding
.
3
Ƒ
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (EE) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Adding
.
2 Attach the right arm to the seat and back
ƑAttach the right arm (C) to the chair seat (D) and chair back (A) using
M6 bolts (AA) and washers (BB).
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (EE) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Adding
.
4Add cushions
Ƒ
BB
AA AA
AA
BB
BB
CC
DD
CC
CC
AA
BB
CC
AA
BB
CC
Atta
back
ch the left arm to the seat and
Atta Add seat cushion (E) and back cushion (F).ch the left am (B) to the chair seat (D) and chair back (A)
using M6 bolts (AA) and washers (BB).

6
Care and Cleaning
ƑDo not allow water to build up in the frames. This will cause corrosion and possible freezing damage in cold climates.
ƑUse a mild soap and water for normal cleaning. Do not use janitorial or alcohol based cleaners. Some cleaners may be marked as
.
ƑRinse with clean water and dry with a soft, absorbent cloth towel.
ƑTreat the frames with a liquid wax for maximum protection against UV rays and/or salty, damp air.

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m.-7 p.m., EST, Monday-Friday,
9 a.m.-6 p.m., EST, Sauturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.

THANK YOU
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
LAUREL OAKS DINNING TABLE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday,
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item # XXX XXX
Model # 720.127.000

2
Table of Contents
Table of Contents ...................................2
Safety Information ..................................2
Warranty ..........................................2
What is covered ...................................2
What is not covered ................................2
Pre-Assembly ......................................3
Planning Assembly.................................3
Hardware Included.................................3
Table Package Contents.............................4
Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Care and Cleaning ..................................6
Safety Information
CAUTION: Read all of the instructions in this manual
before you begin assembly. Failure to do so may result in
faulty assembly and potential injury!
Warranty
2 YEAR WARRANTY
WHAT IS COVERED
We warrant the product to be free of manufacturing defects to the original purchaser for two years.
WHAT IS NOTCOVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, freezing, or abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact Customer Care at 1-855-HD-HAMPTON or visit www.hamptonbay.com.

3
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
Please read this entire instruction manual prior to assembly.
Identify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a non-abrasive surface
to avoid scratching.
NOTE: More than one person may be required to assemble
this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part DescriptionQuantity
AA M8x20 Bolt
Washer
12
BB
CC Spring washer 12
12
12
DD Bolt cap
EE 1
Hex Wrench
BB CC DD EE
AA

4
Pre-Assembly
TABLE PACKAGE CONTENTS
IMPORTANT: Do not fully tighten bolts/screws until all pieces are loosely assembled.
Part Description Quantity
A Table top 1
B Table legs 1
B
BB
B
A

A
5
Assembly
1
Ƒ
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (EE) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Adding
.
2
Ƒ
EE DD
AA
BB
B
B
B
B
CC
Attach the table leg to the table top
Put the table top on the soft ground. Attach the table leg
(B) to the table top (A) using M8 bolts (AA), washers (BB)
and spring washers (CC).
Turn the table over
Turn the table over and set on the ground.