HAMPTON BAY 408-179 User manual

INSTRUCTIONS MANUAL
HOME DEPOT SKU# 408-179 (UPC# 046335848276)
Page 1
EXTERIOR WALL LANTERN

Page 2
FEATURES:
Before returning to your local Home Depot, please call our Customer Service Team at 1-877-
527-0313 or visit www.homedepot.com. Please reference your SKU (408-179) or UPC
(046335848276).
QUESTIONS, PROBLEMS, MISSING PARTS:
1. Easy to install.
2. Solid cast aluminum resists elements.
Thank you for purchasing this Hampton Bay exterior wall lantern. This product has been
manufactured with the highest standards of safety and quality. The finish of this lantern is
weather resistant but over time will naturally weather and fade.

Page 3
TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY
(not included):
CAUTION:
1. Before starting installation of this fixture or removal of a previous fixture, disconnect the
power by turning off the circuit breaker or by removing the fuse at the fuse box.
2. There are no serviceable parts inside the motion sensor. DO NOT try to repair or
disassemble the unit. Doing so could damage the unit and cause possible electrical shock.
Consult a qualified electrician if needed.
3. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL
QUESTIONS. If you have any non-electrical questions about this fixture, please call our
Customer Service Team at 1-877-527-0313 or visit www.homedepot.com. Please
reference your SKU (408-179) or UPC (046335848276).
4. KEEP your receipt and these Instructions for Proof of Purchase.
Safety
goggles
Wire
strippers
Phillips
screwdriver
Electrical
tape
Wire
cutters
Flathead
screwdriver
3 Light Bulb (60
watt maximum)
Silicon Rubber
Sealant
for exterior use

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1 ea Thumb
Screw (#6)
2 ea Hood
Screws (#8)
1 ea Main Fixture Body (#5)
ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the fixture. Lay out all parts on a clean surface.
2. Before continuing Assembly please proceed to the Installation Instructions.
3. Install 3 Light Bulbs (#4) in the sockets of the Main Fixture Body (#5). Do
not exceed a 60 watt incandescent light bulb.
4. Attach the Hood (#7) to the Main Fixture Body (#5) using the provided Hood
Screws (#8), as shown.
Hood (#7)
Page 4

ASSEMBLY:
4. Light Bulb
5. Main Fixture Body
7. Hood
8. Hood Screw
Page 5