HAMPTON BAY GFM00469A User manual

THANK YOU
We appreciate the trust and confidence you have p laced in Hampton Bay through the purchase of this gazebo. We strive to continually create.
.sdeentnemevorpmiemohruoyrofelbaliavastcudorpfoenilllufruoeesotenilnosutisiV.emohruoyecnahneotdengisedstcudorpytilauq
Thank you for choosing Hampton Bay!
Item #
Model # GFM00469A
USE AND CARE GUIDE
ARCHED GAZEBO
Questions, problems, missing parts? Before returning to the store
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
1001 531 607

2
Table of Contents
Table of Contents..........................................................2
Warranty ........................................................................2
What is Covered ...................................................................... 2
What is Not Covered ................................................................ 2
Pre-Assembly ................................................................3
Planning Assembly .................................................................. 3
Hardware Included .................................................................. 3
Warranty
1 YEAR FRAME AND 1 YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
Safety Information
PRODUCTCAUTION
This gazebo was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product is intended for
normal outdoor use; however, the manufacturer recommends storing and / or covering this gazebo when any formidable / severe weather is
approaching. Do not locate this product near open ames. Do not use this product as a support. Do not shake, lean or climb on the product.
Children under the age of 10 near this product, should be supervised by a competent adult at all times. This product is NOT intended for
commercial use and will void the warranty.
SAFETY WARNINGS
It remains the customer’s responsibility for freight and packaging charges to and from our servicecenter. This warranty does not cover
commercial use, hardware, actsofnature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty. We
reserve theright tomake substitutionswith similar merchandise, ifthemodel in question isno longer in production.
Assembly ....................................................................... 5
Package Contents .................................................................... 4
Safety Information .......................................................2
Product Caution .................................................................... 2
WARNING: Please keep children out of the assembly area
before assembly. CAUTION: Do not locate the product near any heat source.
CAUTION: When not in use, secure the product in a
!
!
Safety Warnings ..................................................................... 2
Care and Cleaning............................. ...........................
14
cool and covered location.
WARNING: This gazebo unit is heavy, and may require two
adults for safe assembly.

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: Need three to four persons to assemble this
product.
Part Description Quantity
AA M6x15 bolt
BB M6x18 countersunk bolt 8+1
49+1
HARDWARE INCLUDED
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
CC M6x35 bolt 1+4
DD
M6x75 bolt 1+62
NOTE: Hardware not shown to actual size.
EE
Washer 1+97
AA BB CC DD EE
FF GG
FF
Ground spike 1+61
GG
Hex wrench 2

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A Right connector bar 2
B Left connector bar 2
Lengthways bar 4
Side top bar 2
Center lengthways bar 1
Part Description Quantity
I Protective cover 1
J Fabric shade 1
K Magnet iron plate 1
L End tip 4
C
D
E
E1 Center fabric hanger 4
Short shade rod 2
Long shade rod 4
Post 4
F
G
H
L1
Sidefabric hanger 8
Q
Center tip 2
R
Post base plate 4
S
Inner tip 8
H
A
B
A
B
C
E
F
G
I
J
K
L
SQ
R
F
H
A
B
A
B
C
E
F
G
J
K
L
SQ
R
F
H
A
B
A
B
C
E
F
G
I
J
K
L
SQ
R
F
H
A
B
A
B
C
D
E
F
G
J
K
L
SQ
R
F
E1
L1
L1

1
l
5
Assembly
Insert the back left connector bar (B) into the back right connector bar (A) first , then secure the back right connector bar (A) to
the back left connector bar (B) using M6x15 bolts (AA) and washers (EE).
Connecting the back connector bar with the magnet iron plate
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
NOTE: Fully tighten all bolts using the hex wrench (GG).
A
B
B
AAB
K
K
AA
EE
EE AA AA
EE
AB
Attach the magnet iron plate (K) to the assembled connector bars (A & B) using M6x15 bolts (AA) and washers(EE).

2
l
6
Assembly (continued)
Connecting the front connector bar
NOTE: Fully tighten all bolts using the hex wrench (GG).
A
B
B
A
AA
AA
EE
EE
A
B
Insert the front left connector bar (B) into the front right connector bar (A) first , then secure the front right connector bar (A) to
the front left connector bar (B) using M6x15 bolts (AA) and washers (EE).

3
l
7
Assembly (continued)
Insert the tip
Take out the foam blocks in the side top bar (D). Insert the end tips (L) into the side top bar (D). Repeat this step for another
Take out the foam blocks in the center lengthways bar (E), and insert the center tips (Q).
Insert the inner tip (S) into the lengthways bar (C). Repeat this step for another three lengthways bars (C).
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
D
C
C
E
S
S
S
Q
L
E
D
foam block
L
D
E
Q
Q
foam block
side top bar (D).
L
3-1
3-2
3-3

4
l
8
Assembly (continued)
Attaching the crossbar
Attach the center lengthways bar (E) to the center of the front connector bars (A and B) using M6x75 bolts (DD) and washers (EE).
Attach four lengthways bars (C) and two side top bars (D) to the assembled connector bars (A and B) sing M6x75 bolts (DD) ,
M6X15 bolts (AA )and washers (EE) as shown below.
Once all bolts are in place,Fully tighten all the bolts by the hex wrench (GG).
DD
EE
Q
A
E
B
EE
DD
AA
S
EE
A&B
C
B
B
A
A
C
C
E
D
D
Q
B
A
E
K
DD
AA
EE
EE
D
A&B
L
AA
DD
EE
EE
The hole is to lock the
protective cover (I)
Attach the center lengthways bar (E) to the center of the back connector bars (A and B) using M6x75 bolts (DD) ,M6X15 bolts (AA )
and washers (EE).
Make sure two side top bars (D) and the center lengthways bar (E) with protective cover bolt hole side to stay on the same direction
for assembly the protective cover (I) successfully,then attach to the assembled connector bar(A&B) without Magnet iron plate (K)
as shown below.

5
l
9
Attach the post base plates (R) to the posts (H) using M6x15 bolts (AA) and washers (EE).
Attaching the post base plates to the posts
Assembly (continued)
NOTE: Loosely tighten all bolts using the hex wrench (GG).
H
R
HR
AA
EE
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Repeat this step for another three posts (H).

6-1
l
10
Assembly (continued)
Attaching the posts to the assembled structure
Attach the posts (H) to the assembled structure using M6x15 bolts (AA), M6x75 bolts (DD), and washers (EE).
NOTE: Suggest two ladders to assemble the posts.
H
H
D
D
D
L
B
A
DD
EE
EE
AA
A&B

6-2
l
11
Assembly (continued)
Attaching the posts to the assembled structure
Attach the posts (H) to the assembled structure using M6x15 bolts (AA), M6x75 bolts (DD), and washers (EE).
NOTE:
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
H
H
H
H
H
D
D
D
L
BA
DD
EE
EE
AA
AB
A&B
Suggest two ladders to assemble the posts.
Once all bolts are in place, full tighten all the bolts.

7
l
12
Insert the short shade rods (F) into the top slots of the fabric shade (J).
Inserting the short shade rods into the fabric shade
Assembly (continued)
J
F
F

8
l
13
Assembly (continued)
Attaching the short shade rods
Attach the four ends of the short shade rods (F) to the front connector bars (A&B) using M6x35 bolts (CC) and washers (EE).
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
A
F
F
E
F
A
4-1
B
F
CC
EE
CC
EE
CC
J
B
CC
EE
EE
J
A&B
F
4-2
4-3
4-4
Pull out the elastic ribbons on the two fabric slot ends.

9
l
14
Assembly (continued)
Connecting the long shade rods
Insert the four long shade rods (G) through the half-slot, through the center fabric hangers (E1), through the rest half-slot.
D
G
G
J
6-6
BB
J
6-1
GJE
GJ
6-2
G
D
G
J
6-5
BB
G
G
BB
BB
BB
BB
BB
GG
L1
E1
J
G
6-3
Pull the elastic ribbons to the pastic wheel on the side top bar (D).
D
J
G
BB
Secure the long shade rods (G) with M6x18 countersunk bolts (BB).
6-4
Fully tighten all the bolts with the hex wrench (GG).

10
l
15
Assembly (continued)
Installing the protective cover and the ground spikes
Attach the protective cover (I) to the side top bars (D) and the center lengthways bar (E) using M6x15 bolts (AA) and washers (EE).
Insert the ground spikes (FF) through the post base plates (R) and into the ground.
NOTE: Fully tighten all the bolts with the hex wrench (GG).
E
I
H
R
I
D
I
FF
AA
EE
AA
EE
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
FF
FF
FF

11
l
16
Ensure all connections are secure before use.
Completing the assembly
Assembly (continued)
Care and Cleaning
For best results, clean the gazebo with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Do not clean with abrasive materials, bleach, or solvents.
Store the gazebo in a dry, sheltered place when not in use.
Keep the gazebo away from , extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.

Questions, problems,missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.