HAMPTON BAY LORSTON GFM30731C User manual

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this gazebo. We strive to continually
create quality products designed to enhance your home. Visit us onlineto see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
LORSTON 9.7 X 9.7 FT GAZEBO
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HOMEDEPOT.CA
Item #0000 000 000
Model #GFM30731C

2
Table of Contents................................... . . 2
Important Safety Instructions.......................... . 2
Warranty ................................... . . . . . . . . 3
Pre-Assembly..................................... . . . .
Assembly. . . . . . .................................... . . .
Planning Assembly .................................. .
Save These Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read All Instructions Before Use . . . . . . . . . . . . . . . . . . . . . 2
What is covered ....................................3
What is not covered .................................3
Care and Cleaning .................................. . . .
Table of Contents
Important Safety Instructions
Package Contents . ............................... . . . .
SAVE THESE INSTRUCTIONS
WARNING: THIS GAZEBO WAS MADE FOR THE EXPLICIT PURPOSE OF PROVIDING OUTDOOR FUNCTIONS AND IS NOT TO BE USED AS A TOY.
THIS PRODUCT IS INTENDED FOR NORMAL OUTDOOR USE; HOWEVER, THE MANUFACTURER RECOMMENDS STORING AND/OR COVERING THIS
PRODUCT WHEN ANY FORMIDABLE/SEVERE WEATHER IS APPROACHING.
WARNING: DO NOT LOCATE THIS PRODUCT NEAR OPEN FLAMES. DO NOT USE THIS PRODUCT AS A SUPPORT. DO NOT SHAKE, LEAN OR CLIMB
ON THE PRODUCT. CHILDREN UNDER THE AGE OF 10, NEAR THE PRODUCT, SHOULD BE SUPERVISED BY A COMPETENT ADULT AT ALL TIMES.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE AND WILL VOID THE WARRANTY.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by
or near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
3. Do not move the gazebo while it in use. Failure
to obey this caution could result in injury.
3
5
25
3
WARNING: This gazebo unit is heavy, and may
require two adults for safe assembly.
WARNING: Never use this product as a support. Do not
shake, lean, or climb on the product at any time.
WARNING: Please keep children out of the assembly
area before assembly.
CAUTION: When not in use, secure the product in a
cool and covered location.
CAUTION: Do not locate the product near any heat
sources or open flame.
CAUTION: This gazebo is made for the explicit purpose of
providing limited outdoor sunshade and is not to be used
as a toy, shelter, or tent.
CAUTION: Children under the age of 10 who are near
the gazebo should be supervised by a competent
adult at all times.
WARNING: Do not place heavy objects on the gazebo.
Hardware Included. . ............................... . . . 3
4

3
Please contact 1-855-HD-HAMPTON for further assistance.
Warranty
1 YEAR FRAME LIMITED WARRANTY
WHAT IS COVERED
We warrant the frames to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to assemble this product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HOMEDEPOT.CA.
HOMEDEPOT.CA
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
M6x15 Combination Bolt
M6x30 Combination Bolt
184+1
18+1
AA
BB
M6x40 Combination Bolt 28+1 CC
M6x75 Combination Bolt 8+1
DD
M6 Nut 8+1
EE
Part Description Quantity
AA CC BB DD EE FF
Plastic Washer 2+1
FF
Ground Spike 8+1 GG
Wrench 1 HH
Hex Wrench 2 II
GG II
HH

4
Pre-Assembly (continued)
PACKAGE CONTENTS
AA
A
A
B
B
B
B
B1
B1
B1
B1
L
L
L
L
L1
L1
L1
L1
M
M
M
M
M1
M1
M1
M1
N
N
N
N
N1
N1
N1
N1
C
C
C
C
C1
C1
C1
C1
C2
C2
C2
C2
D
DD
D
D1
D1 D1
D1
E
E
D1
D1 D1
D1
D
D
E
F
F1
F
F
F
F1
F1
F1
F2
F2
F2 F2
G
GG
G
G1
G1
G1
G1
H
H
HH
H1
H1
H1
H1
J1
H2
H2
H2
H2
J
J
J
J
J1
J1
J1
KK
K
K
K1
K1
K1
K1
N2
N2
N2
N2
N3
N3
N3
N3
P
P
P
PP1
Q
Q
QQ
Q1
Q1
Q1
Q1
Q1
R
R
R
R
R
R
R
R
R1
R1
R1
R1
S
T
T1
Post
Long Beam 1
4
4
A
B
Long Beam 2 4 B1
Corner Incline Tube 4 C
Middle Incline Tube 4 C1
Part Description Quantity
Top Corner Incline Tube 4
C2
Short Horizontal Tube 8 D
Long Horizontal Tube 8
D1
Top Frame Tube 4
E
Border Tube 1 4
F
Border Tube 2 4 F1
Top Border Tube 4 F2
Top Cover Plate 4
G
Cover Plate 4
G1
Metal Plate 1 4 H
Metal Plate 2 4
H1
Metal Plate 3 4
H2
Metal Plate 4 4 J
Metal Plate 5 4
J1
Metal Plate 6
Metal Plate 7
4
4
K
K1
Post Base Plate 4
L
Post Base Cap 4 L1
Beam Decorator 4 M
Part Description Quantity
Beam Lining 4
M1
Right Corner Support Bar 4 N
Left Corner Support Bar 4 N1
Corner Fitting 4
N2
Middle Fitting 4
N3
Top Frame Plug 4
P
Metal Plate Cover Component 4
P1
Incline Connecting Plate 8 Q
Middle Connecting Part 8
Q1
Incline Outer Metal Part 8
R
Border Tube Outer Metal Part 4 R1
Top Plate 1
S
Bottom Plate 1
T
Hook 1
T1

5
Assembly
1Attaching The Post Base Cap And The Post Base Plate To The Post
Attach the post base cap (L1) and the post base plate (L) to the posts (A) using M6x15 combination bolts (AA).
Repeat this step for the other three posts (A).
Fully tighten the bolts using the hex wrench (II).
Please contact 1-855-HD-HAMPTON for further assistance.
HOMEDEPOT.CA
STEP 1
STEP 2
A
L1
L
A
L
L1
AA
x 4
A

6
Assembly (continued)
2Attaching The Long Beam 1 And Long Beam 2 To The Beam Lining And The
Beam Decorator
Attach the long beam 1 (B) and long beam 2 (B1) to the beam lining (M1).
Attach the long beam 1 (B) and long beam 2 (B1) to the beam decorator (M) by using M6x75 combination bolts (DD) and M6 nuts (EE).
Do not fully tighten all the bolts at this step.
B
M
BB1
x 4
B1B
M
STEP 1
STEP 2
EE
DD
DD
EE
B
M1
B
x 4
M1

7
Assembly (continued)
3Attaching The Assembled Long Beam To The Post
Attach the assembled long beam (B & B1) to the two posts (A) using M6x40 combination bolts (CC).
Repeat this step for the other two posts (A).
Do not fully tighten all the bolts at this step.
Please contact 1-855-HD-HAMPTON for further assistance.
HOMEDEPOT.CA
A
A
B
B
CC
A
A
CC
x 2
B1
B1

8
Assembly (continued)
4Connecting The Assembled Long Beam To The Assembled Post
Attach the assembled long beam (B & B1) to the assembled posts (A) using M6x40 combination bolts (CC) as shown below.
Do not fully tighten all the bolts at this step.
B
CC
A
B
B
B
A
A
A
A
CC
B1
B1
B1 B
B1

9
Assembly (continued)
5Attaching The Support Bar To The Beam And The Post
Attach the left corner support bar (N1) to the long beam 2 (B1) by using M6x15 combination bolts (AA).
Attach the right corner support bar (N) to the long beam1 (B) by using M6x15 combination bolts (AA).
Attach the other end of the left corner support bar (N1) and the other end of the right corner support bar (N) to the posts (A) using
M6x15 combination bolts (AA) as shown below.
Do not fully tighten all the bolts at this step.
Please contact 1-855-HD-HAMPTON for further assistance.
HOMEDEPOT.CA
STEP 1
STEP 2
AA
AA
AA
AA
N1
N
B
A
N1
N
STEP 3
B1

10
Assembly (continued)
6Attaching The Corner Fitting To The Corner Incline Tube, Attaching The Middle
Fitting To The Middle Incline Tube
Attach the corner fitting (N2) to the corner incline tube (C) using M6x15 combination bolt (AA).
Attach the middle fitting (N3) to the middle incline tube (C1) using M6x15 combination bolt (AA).
Repeat this step for the other three corner incline tubes (C) and the other three middle incline tubes (C1).
Do not fully tighten all the bolts at this step.
N2
C
x 4
x 4
C1
N3
C1
N3
AA
N2
C
AA

11
Assembly (continued)
7Attaching The Corner Incline Tube To The Post And The Top Frame Tube
Attach the corner incline tube (C) to the post (A) by using M6x15 combination bolts (AA) through the corner fitting.
Insert the top frame plug (P) into the corner incline tube (C) and the top frame tube (E) as shown below.
Do not fully tighten all the bolts at this step.
Please contact 1-855-HD-HAMPTON for further assistance.
HOMEDEPOT.CA
C
P
E
E
C
C
C
C
AA
C
A
A
A
A
A
E
P
N2

12
Assembly (continued)
8Attaching The Middle Incline Tube To The Beam And The Top Frame Tube
Attach the middle incline tube (C1) to the assembled beam (B & B1) by using the M6 nuts (EE) through the middle fitting (N3.)
Insert the middle incline tube (C1) into the top frame tube (E) as shown below.
Do not fully tighten all the bolts at this step.
NOTE: Make sure to unscrew the M6 nut (EE) on the M6x75 combination bolts (DD) first to assemble step 1.
EE
STEP 2
N3
EE
STEP 1
C1
E
C1
M
C1
C1
C1
C1
B & B1
M

13
Assembly (continued)
9Attaching The Top Corner Incline Tube And The Top Border Tube To The Incline
Outer Metal Part, Attaching The Top Corner Incline Tube To The Bottom Plate
Attach the top corner incline tube (C2) and the top border tube (F2) to the incline outer metal part (R) using the M6x15 combination
bolt (AA) as shown below.
Insert the top corner incline tube (C2) into the bottom plate (T).
Do not fully tighten all the bolts at this step.
Please contact 1-855-HD-HAMPTON for further assistance.
HOMEDEPOT.CA
T
C2
C2
C2
T
F2
F2
R
C2
AA
R
R
R
R
F2
F2
F2
F2

14
Assembly (continued)
10 Attaching The Metal Plate 1 To The Top Border Tube
Attach the metal plate 1 (H) to the top border tube (F2) using the M6x15 combination bolts (AA).
Do not fully tighten all the bolts at this step.
UP
F2
AA
H
H
H
H
H

15
Assembly (continued)
11 Attaching The Top Cover Plate And The Top Plate To Metal Plate 1, Attaching
The Top Plate And The Hook To The Bottom Plate
Attach the top cover plate (G) to the metal plate 1 (H) using the M6x40 combination bolts (CC).
Attach the top plate (S) to the bottom plate (T) by using the M6x30 combination bolt (BB) and plastic washer (FF).
Screw the hook (T1) into the bottom plate (T).
Do not fully tighten all the bolts at this step.
Please contact 1-855-HD-HAMPTON for further assistance.
HOMEDEPOT.CA
STEP 1
CC
GS
FF
BB
STEP 2
T1
T
STEP 3
G
G
G
G
S
H
H

16
Assembly (continued)
12 Attaching The Top Corner Incline Tube To The Top Frame Plug, Attaching The
Horizontal Tube And The Incline Tube To The Connecting Plate
Attach the top corner incline tube (C2) to the top frame plug (P) using the M6x15 combination bolts (AA).
Attach the short horizontal tube (D), the long horizontal tube (D1) and the corner incline tube (C), to the incline connecting plate (Q)
using the M6x15 combination bolt (AA).
Attach the short horizontal tube (D), long horizontal tube (D1) and the middle incline tube (C1), to the middle connecting part (Q1)
using the M6x15 combination bolt (AA).
Do not fully tighten all the bolts at this step.
AA
D & D1
D & D1
AA
D & D1 D & D1
D1
D
D
D
D
D1
D1
D1 Q1
Q
C2
P
AA
Q1
Q
CC1

17
Assembly (continued)
13 Attaching The Border Tube To The Incline Tube
Attach the border tube1 (F) and the border tube 2 (F1) to the corner incline tube (C) using the M6x15 combination bolts (AA).
Attach the border tube1 (F) and the border tube 2 (F1) to the middle incline tube (C1) using the M6x15 combination bolts (AA).
Do not fully tighten all the bolts at this step.
Please contact 1-855-HD-HAMPTON for further assistance.
HOMEDEPOT.CA
F
F1
F
F1
F
C
F1
AA
C1
FF1
AA AA

18
Assembly (continued)
14 Attaching The Metal Plate
Attach the metal plate 7 (K1) and the metal plate 6 (K) to the border tube (F & F1) using the M6x15 combination bolts (AA) as
shown below.
Attach the metal plate 7 (K1) and the metal plate 6 (K) to the corner incline tube (C) by using the M6x15 combination bolts (AA)
as shown below.
Do not fully tighten all the bolts at this step.
KK1
K1
K
K1
K
AA
K1 K
UP
K & K1
AA
C
F & F1

19
Assembly (continued)
15 Attaching The Metal Plate To The Metal Plate Cover Component
Attach the metal plate 7 (K1) and the metal plate 6 (K) to metal plate cover component (P1) using the M6x15 combination
bolts (AA).
Do not fully tighten all the bolts at this step.
Please contact 1-855-HD-HAMPTON for further assistance.
HOMEDEPOT.CA
AA
K1
K
P1
K1 K
UP

20
Assembly (continued)
16 Attaching The Metal Plate
Attach the metal plate 4 (J) and metal plate 5 (J1) to border tube (F & F1) using the M6x15 combination bolts (AA) and M6x30
combination bolts (BB) as shown below.
Attach the metal plate 4 (J) and metal plate 5 (J1) to the corner incline tube (C) by using the M6x15 combination bolts (AA)
as shown below.
Do not fully tighten all the bolts at this step.
BB
J1
J
J
J1
J1 K1
UP
KJ
UP
K
K1
K
J1
J
AA
J & J1
AA
K1
F & F1
C
F & F1