HAMPTON BAY HEATHER GLEN FRN-312640-5S User manual

USE AND CARE GUIDE
HEATHER GLEN 5PIECE SMALL SPACE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-841-1350
HAMPTONBAY.COM
THANK YOU
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Item # 100 643 3468
Model # FRN-312640-5SS

2
Table of Contents
Safety Information ..................................2
Warranty ..........................................2
Care and Cleaning ..................................2
Table Assembly...................................3-4
Hardware Included.................................3
Package Contents .................................3
Chair Assembly...................................5-7
Hardware Included.................................5
Package Contents .................................5
Ottoman Assembly ...............................8-10
Hardware Included.................................8
Package Contents .................................8
Care and Cleaning
□Use mild soap and warm water to clean the frames.
□Rinse with clean water and dry thoroughly.
□Be sure to drain any water accumulated inside the frames. To thoroughly drain frames, remove footcaps and tilt frames, if
necessary, to remove all water. Water allowed to accumulate inside the frames and then exposed to sub-freezing temperatures can
cause damage to frame tubing. Such damage caused by conditions other than normal is not covered under warranty.
□Any rust spots should be lightly sanded and treated with rust inhibitor and followed with an application of touch-up paint (not
included).
Important Safety Instructions
Warranty
TWO YEAR LIMITED WARRANTY
WHAT IS COVERED
The frame is warranted to be free of manufacturing defects for two year from the purchase date. If the frame of your furniture fails (ie.
broken frame or weld) within two year of ownership, Hampton Bay will repair, provide replacement parts, or replace the product at our
option. Frame finishes are warranted against blistering, cracking, or peeling for two year from purchase date. This is a residential use
warranty only. Warranty is void when product is used for commercial settings. This warranty is a limited warranty and applies to the
original purchase only. Proof of purchase is required.
Contact the Customer Service Team at 1-800-841-1350 or visit hamptonbay.com
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by or
near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
SAVE THESE INSTRUCTIONS.
DANGER: Keep children out of the assembly area during
assembly.
CAUTION: Do not use sharp equipment such as a knife
and scissors when removing the protective material, as it
may damage the product.
WARNING: Do not sit or stand on the table.
WARNING: Do not stand on the chair.

3 HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.
Table Assembly
PLANNING ASSEMBLY
Before beginning the assembly of this product, make sure all parts are present. Compare parts with Package Contents and Hardware
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA Bolt M6*15mm 16
CC Washer 16
DD Hex Wrench 1
AA CC DD
Assembly requires two people.
Included lists. If any part is missing or damaged, do not attempt to assemble the product, and return it to the place of purchase.
PACKAGE CONTENTS
I J
HARDWARE INCLUDED
Part Description Quantity
ITable Top 1
J Table Leg 4

4
Table Assembly (continued)
1 Attaching the Legs to the Table Top
2 Completing the Assembly
□Place the Table Top (I) upside down on a soft,
clean and level surface.
□Insert the Legs (J) into the Table Top (I), by
using the Bolts (AA) and the Washers (CC).
□Tighten all the bolts with the Hex Wrench (DD).
□Turn the table over, then adjust self-
leveling feet on table for equal balance
(as shown).
□Now the table is ready to use.
CC
AA CC
AA
J
I

5 HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.
Chair Assembly
PLANNING ASSEMBLY
Before beginning the assembly of this product, make sure all parts are present. Compare parts with Package Contents and Hardware
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA Bolt M6*15mm 24
BB Bolt M6*25mm 12
CC Washers 36
DD Hex Wrench 1
Part Description Quantity
A Front Leg 2
B Chair Seat 2
C Chair Back 2
H Back Leg 4
K Seat Cushion 2
L Back Cushion 2
HARDWARE INCLUDED
PACKAGE CONTENTS
AA
A
H
BB
B
K
CC
C
L
DD
Assembly requires two people.
Included lists. If any part is missing or damaged, do not attempt to assemble the product, and return it to the place of purchase.

6
Chair Assembly (continued)
1 Connecting the Front Leg to the Chair
Seat
2 Connecting the Chair Back to the
Chair seat & Front Legs
□Connect the Front Leg (A) to Seat (B) using the Bolts
(BB) and Washers (CC).
□Do not overtighten all the bolts.
□Connect the Chair Back (C) to the assembled Chair
Seat (B) and Front Leg (A) using the Bolts (AA & BB)
and Washers (CC) as shown.
□Do not overtighten bolts (BB) during this step.
CC
BB
B
A
CC
BB
A
B
C
CC
AA

7 HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.
Chair Assembly (continued)
3 Inserting the Back Legs to the Chair
Seat
4 Put the Seat and Back Cushions on
the Chair
□Insert the Back Legs (H) to the Chair Seat (B), by using
Bolts (AA) and Washers (CC) and Hex Wrench (DD).
□Turn the Chair over and place on a at
surface
□Tighten all the bolts on the seat with the
Hex Wrench (DD).
□Put the Seat Cushion (K) and Back Cushion
(L) on the chair.
□The Chair now is ready to use.
H
B
AA
CC AA
CC
L
K

8
Ottoman Assembly
PLANNING ASSEMBLY
Before beginning the assembly of this product, make sure all parts are present. Compare parts with Package Contents and Hardware
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA Bolt M6*15mm 8
BB Bolt M6*25mm 12
CC Washers 20
DD Hex Wrench 2
Part Description Quantity
D Leg 4
E Ottoman Seat 2
F Side Panel 4
K Seat Cushion 2
HARDWARE INCLUDED
PACKAGE CONTENTS
AA
D
F
BB
E
K
CC DD
Assembly requires two people.
Included lists. If any part is missing or damaged, do not attempt to assemble the product, and return it to the place of purchase.

9 HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.
Ottoman Assembly (continued)
1 Connecting the Legs to the Ottoman
Seat
2 Inserting the Side Panel to the
assembled seat
□Connect the legs (D) to the Ottoman Seat (E), by using
the Bolts (BB) and Washers (CC).
□Do not overtighten all the bolts.
□Turn the assembled Ottoman Seat over and place on a
at surface.
□Insert the Side Panels (F) to the assembled Ottoman
Seat, by using the Bolts (AA & BB) and Washers (CC)
as shown.
□Then tighten all bolts with the Hex Wrench (DD).
BB
CC
D
E
DD
CC
AA
F
D
BB
CC

10
Ottoman Assembly (continued)
3 Put the cushion on the Ottoman
□Put the Seat Cushion (K) on the assembled
Ottoman Seat.
□Now the Ottoman is ready to use.
K