HAMPTON BAY GGHL00019 User manual

Item # 1000 327 738
Model # GGHL00019
USE AND CARE GUIDE
ARROW GAZEBO
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
1-855-HD-HAMPTON
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this gazebo. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

.
!
WARNING:
gazebo fabric.
!
WARNING: This application of any foreign substance to the
ineffective.
!
WARNING: This gazebo is made with fabric that meets
proof. The fabric will burn if left continuous contact with any
2 YEAR FRAME AND FABRIC WARRANTY
WHAT IS COVERED
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for two year.

GG
AA M6x15 combination bolt
Description QuantityPart
BB M6x10 combination bolt and nut
CC M6x20 combination bolt and nut
4+1
8+1
4+1
DD M6x30 combination bolt and nut
EE M6x35 combination bolt and nut
FF Ground spike 8+1
12+1
16+1
2 GG Hex wrench
8+1
HH Corkscrew ground spike
HH

Assembly
5HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembling the corner panels
Connect the panels (A and B) by lining up the labels near the top, middle, and bottom of the panels and connecting them with M6x35
combination bolts and nuts (EE).
Repeat for the remaining sets of panels (A and B).
Secure the four corner connectors (I) onto the top corners of the assembled panels (A and B) with M6x20 combination bolts and nuts (CC).
1
NOTE: Loosely tighten the bolts.
B
A
2
1
A
B
EE
I
EE
A
B
CC
I

Assembly (continued)
6
Connecting the corner panels
Line up the two holes on the two ends of the beam (C) with the corresponding bolt holes on the side tubes of panels (A and B).
Attach the panels to the beam (C) using M6x30 combination bolts and nuts (DD).
Repeat for the remaining three beams (C).
2
NOTE: Loosely tighten the bolts.
C
C
C
C
B
A
C
DD
A&B

Assembly (continued)
7HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembling the canopy
Insert the four canopy spokes (D) into the four long tubes of the lower canopy hub (H).
Insert the four canopy frames (E) into the four short tubes of the lower canopy hub (H).
Make sure all push pins are in place.
3
E
E
E
D
D
D
D
DD
D
E
E
E
E
H
H
E
D

Assembly (continued)
8
Placing the large fabric cover
Place the large fabric cover (L) loosely on top of the assembled frame.
4
NOTE: Do not fully extend the fabric cover.
D
D
D
D
E
E
E
L

Assembly (continued)
9HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembling the small canopy
5
Insert the three short canopy spokes (G) into the upper canopy hub (J). Seefigure 1.
Install the small fabric cover (K) on the three short canopy spokes (G), and pull the three corresponding pouches of the small fabric
cover (K) onto the ends of the three short canopy spokes (G). See figure 2.
Pull the remaining pouch of the small fabric cover (K) onto the end of the remaining short canopy spoke (G). See figure 3.
Insert the remaining short canopy spoke (G) into the upper canopy hub (J). See figure 4.
Ensure all snap buttons are in place. Screw the top arrow (P) onto the upper canopy hub (J). See figure 5.
Fig. 5
K
P
J
GFig. 4
Fig. 3
Fig. 2
Fig. 1
G
GG
J
K
G
K
P
J

Assembly (continued)
10
Attaching the small canopy
Attach the four short canopy spokes (G) to each of the regular canopy spokes (D) by inserting the connecting peices of (G) into (D).
Ensure all push pins are secure.
6
G
L
D
E
D
D
E
D