HAMPTON BAY SHILOH GLEN GG-11075-SSP User manual

USE AND CARE GUIDE
Item#
GG-11075-SSP
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-841-1350
HAMPTONBAY.COM
THANK YOU
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Hampton Bay!
gaz ebo
GAZEBO
SHILOH GLEN
Model#
1006 471 544

2
Table of Contents
Table of Contents .................................. . 2
Important Safety Instructions ................................. .2
Warranty ......................................... . 2
What is covered .................................. . 2
What is not covered ............................... . 2
Important Safety Instructions
2.
SAVE THESE INSTRUCTIONS
Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
Close supervision is necessary when this furnishing is used by or
near children, or disabled persons, if applicable.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1.
Pre-Assembly.
.................................. ..3
Planning Assembly
............................. ..3
Hardware Included ................................3
Package Contents .................................4
Assembly ...................................... ..
Care and Clea.ning ..................................
5
7710
Warranty
THIS IS A RESIDENTIAL WARRANTY ONLY AND DOES NOT APPLY TO COMMERCIAL USE
YEAR FRAME LIMITED WARRANTY
WHAT IS COVERED
Contact the Customer Service Team at 1-80 0 -84 1-1350 or visit www.hamptonbay.com.
WHAT IS NOT COVERED
It remains the customer's responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, re, freezing, and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
For a copy of our full limited warranty, please contact our customer service team below.
We warrant the frame to be free of manufacturing defects to the original purchaser for three years.
3
Warning
WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.
This tent meets the ammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any ame source.
The application of any foreign substance to the tent fabric may render the ame-resistant properties ineffective.

3
Pre-Assembly
NOTE: More than one person may be required to
complete the assembly of this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
PLANNING ASSEMBLY
Please read this entire instruction manual prior to assembly.
Compare all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a non-abrasive surface to
avoid scratching.
_
AA
_
BB
M6 x 30 mm
_CC _DD _EE _FF
_GG
Part Description Quantity
AA M6 x 15 mm 52
BB 8
CC 4
DD
M6 x 45 mm
8
M6
12
1
1
EE
F F
G G
combination bolt
combination bolt
combination bolt
nut
M6 Allen wrench
HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.
M6 Hex wrench
S take

Pre-Assembly
4
PACKAGE CONTENTS
Part Description Quantity
B S hort beam
4
C
4
A Post
4
D 4
E
4
F
2
2
1
4
H
(continued)
J
ＧＨ
Long beam
Leg base plate
G
ABC
DE F
J
I
I
Top support bar 1
U shape clip 1 4
K
K
4
8
1
1
L
Mosquito Net 1 2
2
L
D1
L1
MM1 N
Top support bar 2
Top support bar 3
Top support bar 4
D1
Top plate
U shape clip 2
U shape connector
Big canopy cover
L1
M
S mall canopy cover
M1
NLeg cloth 4
Mosquito Net 2

Assembly
Attaching the beams
1
Attach the short beams ( B) and long beams ( C) with U shape connector ( K ) using M6 x 45 mm combination bolts ( CC) and M6 nuts ( DD) ,
□
M6 x 15 mm combination bolts ( AA) .
Attach the U shape clips 2 ( ) to the U shape connector ( K ) using M6 x 15 mm combination bolts ( AA) .
□JLoosely tighten all the bolts with M6
F ully tighten all the bolts with M6 Allen wrench ( F F ) .
Allen wrench ( F F ) .
Attaching the U shape clips and leg base plates to the posts
2
Attach the U shape clips 1 ( ) and leg base plates ( H) to the posts ( A) using M6 x 15 mm combination
□bolts ( AA) with M6 Allen wrench ( F F ) .
F ully tighten the bolts on the leg base plates ( H) , and loosely tighten the U shape clips ( ) .
5HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.
□I
I

Attaching the long beams to the posts
3
Attach the long beams ( C) to the posts ( A) using M6 x 15 mm combination bolts ( AA) .
□
□F ully tighten all the bolts with M6 Allen wrench ( F F ) .
(continued)
Assembly
Attaching one short beam to the posts
4
Attach one short beam ( B) to the posts ( A) using M6 x 15 mm combination bolts ( AA) .
□
□F ully tighten all the bolts with M6 Allen wrench ( F F ) .
6

5
(continued)
Assembly
Attaching another short beam to the posts
Attach the another beam ( B) to the posts ( A) using M6 x 15 mm combination bolts ( AA) .
□
□F ully tighten all the bolts with M6 Allen wrench ( F F ) .
6
Attaching the top support bar 4 to the beams
Insert the top support bars 4 ( F ) into the top plate ( G ) .
□
□Attach the top support bars 4 ( F ) to the long beams ( C) using M6 x 30 mm combination bolts ( BB) and M6 nuts ( DD) .
7HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.

8
7
(continued)
Assembly
8
Attaching the top support bar 3 to the beams
Insert the top support bars 3 ( E) into the top plate ( G ) .
□
□Attach the top support bars 3 ( E) to the short beams ( B) using M6 x 30 mm combination bolts ( BB) and M6 nuts ( DD) .
Attaching the top support bar 1 to top support bar 2
□Attach the top support bars 1 ( D) to the top support bars 2 ( D1) using M6 x 15 mm combination bolts ( AA) .
□F ully tighten all the bolts with M6 Allen wrench ( F F ) .

Assembly
6
9
(continued)
9
10
Attaching the top support bars 2 to the posts
Insert the top support bars 1 ( D) into the top plate ( G ) .
□
□Attach the top support bars 2 ( D1) to the posts ( A) using M6 x 30 mm combination bolts ( BB) and M6 nuts ( DD) .
I nsert the canopy covers into the frame
6
Insert the big canopy cover ( L) to the frame according to image below.
□
□Insert the small canopy cover ( L1) to the frame according to image below..
HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.

Assembly (continued)
10
11
H ang the mosq uito net onto the beams
Hang the mosquito nets ( M and M1) onto the beams ( B and C) according to image below.
□
□Hang the leg cloths ( N) onto the four posts ( A) .
□Adj ust position of gazebo and insert the stakes ( EE) into the two holes of leg base plates ( H) .
Care and Maintenance
□ For cleaning, use a mild detergent solution, rinse with water, and allow to air dry.
Do not use acetone, abrasive, or other special detergents as they would be harmful to
the product’s nish.
□ Due to the nature of steel, surface oxidation (rusting) will occur if this protective coating
is scratched. This is a natural process. To minimize this condition, it is recommended
that care be taken when assembling and handling the product in order to prevent the
paint from being scratched.
Ｈ