HandHeld ALGIZ 10X User manual

ALGIZ 10X
QUICK START GUIDE
handheld

STARTING ALGIZ 10X
Note: you will be asked to enter your Microsoft Windows license number that is located
under the main battery.
Press and hold power button for 4 seconds to power on the unit. Follow the on-screen
instructions to get started with Windows. The screen calibration may not be accurate the
rst time you start the computer. Follow the procedure to calibrate the touchscreen.
SCREEN CALIBRATION
1. Open Control Panel > Hardware and Sound > Tablet PC Settings
2. Click Calibrate and follow instructions
Repeat step 1 and 2 until you are satised with the calibration.
WHAT’S IN THE BOX
INSERT BATTERY PACK
CAUTION - Please fully charge the battery in advance
of operating Algiz 10X for the rst time. New battery
packs should be fully charged before Algiz 10X is
disconnected from the external power source. It takes
approximately 3 hours to fully charge the battery from
empty.
Ref. Item Description
1 Battery Pack One 2 Cell Li-Ion Battery Pack
2 19V Adapter 19V Adapter w/ standard power cord. Standard type
3 Screen protector lm
4 Quick start guide Algiz 10X Quick start guide
3
2
14
!
ALGIZ 10X
QUICK START G UIDE
handheld

FUNCTION KEYS
Ref. Symbol Indicator Status Description
Power mode Green: System is on
No light: System is off or LED indicators are off in HotTab
Storage Status Flashing green light: SSD is reading/writing data
Radio Status Green: Indicates that any transmitting radio is turned on
(WiFi, BT, WWAN)
Battery Status Green: Full battery, Red: Low battery, Orange: Charging
Flashing red: Running on Hot-swap battery
GPS Status Green: Indicates GPS power on
LED INDICATORS
Ref. Components Description
1 Power Button* Hold down for 4 seconds to turn the computer on
2 Menu Menu button to control: brightness, volume, battery,
power to modules, and system information
3Up/Down/Left/ Right/OK Button Control of up, down, left, right and Enter functions
4 F1, F2, 3 programmable buttons. Press Menu to congure
* If computer does not respond you can power off by holding down the Power Button until the LEDs switches off.
Hold down for about 10 seconds.
1. Power Button
2. Menu
4. Function keys
3. Up/Down/Left/
Right/OK Button

handheld
Ref. Item Description
1 Stylus Pen -
2 Service Window Expansion slots
REAR SIDE
LEFT AND RIGHT SIDE
Ref. Item Description
1 DC Power Jack -
2 VGA For connecting external display devices such as monitors and
projectors
3 USB 2.0 Port -
4 RS232 Accepts external connections using the interface of RS232
(D-sub 9 pins)
5 Micro SD Card Slot Accepts Micro SDXC (up to 2TB)
6 SIM Card Slot -
7 Combo Audio Jack Audio in and out
8 USB 3.0 Port -
9 Ethernet (RJ45) 10/100/1000-based network
Please go to www.handheldgroup.com to download the full manual.
2
1
3 6 92 5 8
14 7
www.handheldgroup.com